Date   

Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

19-11-08 20:19:18.696 DMR Slot 2, lost audio for 407ms filling in
D: 2019-11-08 20:19:19.104 DMR Slot 2, lost audio for 408ms filling in
D: 2019-11-08 20:19:19.511 DMR Slot 2, lost audio for 407ms filling in
M: 2019-11-08 20:19:19.791 DMR Slot 2, network watchdog has expired, 52.1 seconds, 2% packet loss, BER: 0.0%
E: 2019-11-08 20:20:17.736 DMR, Connection to the master has timed out, retrying connection
M: 2019-11-08 20:20:17.736 DMR, Closing DMR Network
M: 2019-11-08 20:20:17.736 DMR, Opening DMR Network
D: 2019-11-08 20:20:27.779 DMR, Sending authorisation
D: 2019-11-08 20:20:27.815 DMR, Sending configuration
This is what it is doing at the moment every 52 seconds


Re: NXDN registration

mfj_986
 

Hi Patrick 
Tu le met dans le fichier MMDVM_Bridge.ini
/opt/MMVDM_Bridge/opt/MMVDM_Bridge.ini
Bloc [NXDN]
id=xxxx
Et aussi dans le DVSwitch.ini
Bloc [NXDN]
NXDNFallbackID=xxxx

73 Raymond F6JIG 




Envoyé depuis mon smartphone.

-------- Message d'origine --------
De : F/W3PO <w3po.vq9po@...>
Date : 08/11/2019 20:45 (GMT+01:00)
À : main@DVSwitch.groups.io
Objet : [DVSwitch] NXDN registration

Hello Gents,
A question for the group, and BTW I have searched the previous posts but could not find anything pertaining to this subject.
I have received my NXDN ID but I am looking on how to input that info in the DVswitch server setup.
Thank you for any help provided
Cheers de Pat W3PO


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

M: 2019-11-08 14:23:14.874 MMDVM_Bridge-20191105_V1.4.0 is running
D: 2019-11-08 14:23:25.000 DMR, Sending authorisation
D: 2019-11-08 14:23:25.112 DMR, Sending configuration
M: 2019-11-08 14:23:35.333 DMR, Logged into the master successfully
D: 2019-11-08 14:23:35.333 DMR, Sending XLX options
M: 2019-11-08 14:23:35.333 DMR, Remote CMD: txTg=4000
M: 2019-11-08 14:23:35.333 DMR, Tune: id=3112138, tg=4000, mode=Group
M: 2019-11-08 14:23:35.333 DMR, Remote CMD: txTg=4005
M: 2019-11-08 14:23:35.333 DMR, Tune: id=3112138, tg=4005, mode=Group
M: 2019-11-08 14:23:35.461 DMR Slot 2, received network voice header from N4IRS to TG 9
M: 2019-11-08 14:23:35.467 DMR Slot 2, received network end of voice transmission, 0.1 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-08 14:23:38.840 DMR Slot 2, received network voice header from 2E0MHG to TG 9
M: 2019-11-08 14:23:39.805 DMR Slot 2, received network end of voice transmission, 1.0 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-08 14:25:43.917 P25, received network transmission from KE0ABR to TG 10200
M: 2019-11-08 14:25:44.249 P25, network end of transmission, 0.7 seconds, 0% packet loss
M: 2019-11-08 14:26:16.250 P25, Remote CMD: rxport=30000
M: 2019-11-08 14:26:17.335 P25, Remote CMD: message=Setting mode to DMR
M: 2019-11-08 14:26:17.355 P25, Remote CMD: ambeMode=DMR
M: 2019-11-08 14:26:17.381 P25, Remote CMD: txport=31103
M: 2019-11-08 14:26:17.401 DMR, Remote CMD: rxport=31100
M: 2019-11-08 14:26:18.442 DMR, Remote CMD: info
M: 2019-11-08 14:26:20.936 DMR Slot 2, received network voice header from 2W0HFU to TG 9
M: 2019-11-08 14:26:25.503 DMR Slot 2, received network end of voice transmission, 4.6 seconds, 0% packet loss, BER: 0.0%
M: 2019-11-08 14:28:40.586 P25, received network transmission from KE0ABR to TG 10200
M: 2019-11-08 14:28:41.308 P25, network end of transmission, 1.1 seconds, 0% packet loss

Has not dropped yet. (system time is wrong on test machine)

On 11/8/2019 2:02 PM, Ernie Gm7kbk wrote:
You can test my XLX

IP 81.150.10.62
Port 62030
XLX:4005


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, November 8, 2019 4:43:42 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Should not need DMRGateway What is your option and what server and port?

On 11/8/2019 11:22 AM, davidchien0327 via Groups.Io wrote:
Thanks KB3FS and Steve ,I had update to last MB version and can connect my XLX DMR with selected module with Options ,and seems can pass traffic from BM TG to my xlx module D 

But I got same result as Ernie
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects. On both MMDVM-xlx and mmdvm-bm ,network link as below

XLX DMR <-> MB-xlx<->MB-bm<->BM TG 46620

Is the link correct? Or I need to add DMRgateway to each side ?
Thanks
De BV3UN 




Re: NXDN registration

Steve N4IRS
 

In MMDVM_Bridge.ini

[NXDN]
Enable=0
RAN=1
Id=12345 <----------------------------

On 11/8/2019 2:45 PM, F/W3PO wrote:
Hello Gents,
A question for the group, and BTW I have searched the previous posts but could not find anything pertaining to this subject.
I have received my NXDN ID but I am looking on how to input that info in the DVswitch server setup.
Thank you for any help provided
Cheers de Pat W3PO


NXDN registration

F/W3PO <w3po.vq9po@...>
 

Hello Gents,
A question for the group, and BTW I have searched the previous posts but could not find anything pertaining to this subject.
I have received my NXDN ID but I am looking on how to input that info in the DVswitch server setup.
Thank you for any help provided
Cheers de Pat W3PO


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

You can test my XLX

IP 81.150.10.62
Port 62030
XLX:4005


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Friday, November 8, 2019 4:43:42 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Should not need DMRGateway What is your option and what server and port?

On 11/8/2019 11:22 AM, davidchien0327 via Groups.Io wrote:
Thanks KB3FS and Steve ,I had update to last MB version and can connect my XLX DMR with selected module with Options ,and seems can pass traffic from BM TG to my xlx module D 

But I got same result as Ernie
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects. On both MMDVM-xlx and mmdvm-bm ,network link as below

XLX DMR <-> MB-xlx<->MB-bm<->BM TG 46620

Is the link correct? Or I need to add DMRgateway to each side ?
Thanks
De BV3UN 



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Should not need DMRGateway What is your option and what server and port?

On 11/8/2019 11:22 AM, davidchien0327 via Groups.Io wrote:
Thanks KB3FS and Steve ,I had update to last MB version and can connect my XLX DMR with selected module with Options ,and seems can pass traffic from BM TG to my xlx module D 

But I got same result as Ernie
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects. On both MMDVM-xlx and mmdvm-bm ,network link as below

XLX DMR <-> MB-xlx<->MB-bm<->BM TG 46620

Is the link correct? Or I need to add DMRgateway to each side ?
Thanks
De BV3UN 



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

David BV3UN
 

Thanks KB3FS and Steve ,I had update to last MB version and can connect my XLX DMR with selected module with Options ,and seems can pass traffic from BM TG to my xlx module D 

But I got same result as Ernie
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects. On both MMDVM-xlx and mmdvm-bm ,network link as below

XLX DMR <-> MB-xlx<->MB-bm<->BM TG 46620

Is the link correct? Or I need to add DMRgateway to each side ?
Thanks
De BV3UN 


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Yep,
That's what I get for copy and pasting at 05:44 AM local.

On 11/8/2019 9:49 AM, David Aitcheson KB3EFS wrote:
Uh OH me thinks needed more coffee...

All that is correct save for the typo in the "mv" line...  See below:

On 11/8/19 5:44 AM, Steve N4IRS wrote:
as root:
systemctl stop mmdvm_bridge
cd /tmp
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.armhf

mv /opt/MMDVM_Bridge/MMDVM_Bridge mv /opt/MMDVM_Bridge/MMDVM_Bridge.old
SHOULD BE:
mv  /opt/MMDVM_Bridge/MMDVM_Bridge  /opt/MMDVM_Bridge/MMDVM_Bridge.old
Eliminate the second "mv" and all works fine.

cp /tmp/MMDVM_Bridge.armhf /opt/MMDVM_Bridge/MMDVM_Bridge
systemctl start mmdvm_bridge


Thus the corrected commands in order are:

as root:
systemctl stop mmdvm_bridge
cd /tmp
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.armhf
mv /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.old
cp /tmp/MMDVM_Bridge.armhf /opt/MMDVM_Bridge/MMDVM_Bridge
systemctl start mmdvm_bridge

73
Dave
KB3EFS


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

David Aitcheson KB3EFS <kb3efs.dave@...>
 

Uh OH me thinks needed more coffee...

All that is correct save for the typo in the "mv" line...  See below:

On 11/8/19 5:44 AM, Steve N4IRS wrote:
as root:
systemctl stop mmdvm_bridge
cd /tmp
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.armhf

mv /opt/MMDVM_Bridge/MMDVM_Bridge mv /opt/MMDVM_Bridge/MMDVM_Bridge.old
SHOULD BE:
mv  /opt/MMDVM_Bridge/MMDVM_Bridge  /opt/MMDVM_Bridge/MMDVM_Bridge.old
Eliminate the second "mv" and all works fine.

cp /tmp/MMDVM_Bridge.armhf /opt/MMDVM_Bridge/MMDVM_Bridge
systemctl start mmdvm_bridge


Thus the corrected commands in order are:

as root:
systemctl stop mmdvm_bridge
cd /tmp
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.armhf
mv /opt/MMDVM_Bridge/MMDVM_Bridge /opt/MMDVM_Bridge/MMDVM_Bridge.old
cp /tmp/MMDVM_Bridge.armhf /opt/MMDVM_Bridge/MMDVM_Bridge
systemctl start mmdvm_bridge

73
Dave
KB3EFS


Re: Linking DMR to Echolink

Brad NK8J <bradnk8j@...>
 

Dmr to asl to echolink. Asl has echolink. I have it all on my repeater.


On Wed, Nov 6, 2019, 10:52 PM Dexter Harroo <dex.9y4c@...> wrote:
Hi Guys, 
Don't know if this has been asked before. is there any software in the group that i can use to link lets say DMR to Echolink? if there is i am willing to give it a go.


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Adrian Fewster <vk4tux@...>
 

Ernest, So it is set 4005, but targets 4500 ? Have you tried another module number to compare ?

On 8/11/19 4:52 pm, Ernest Pratt wrote:
Options=XLX:4005


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 9:21:10 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.




Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

as root:
systemctl stop mmdvm_bridge
cd /tmp
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/bin/MMDVM_Bridge.armhf
mv /opt/MMDVM_Bridge/MMDVM_Bridge mv /opt/MMDVM_Bridge/MMDVM_Bridge.old
cp /tmp/MMDVM_Bridge.armhf /opt/MMDVM_Bridge/MMDVM_Bridge
systemctl start mmdvm_bridge

On 11/8/19 5:33 AM, davidchien0327 via Groups.Io wrote:
Steve
I am trying to upgrade my MB to last version,and I am use raspberry pi 3B + with raspbian stretch version 


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

David BV3UN
 

Steve
I am trying to upgrade my MB to last version,and I am use raspberry pi 3B + with raspbian stretch version 


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

David,
What are you trying to do?
What hardware are you running?

Steve N4IRS

On 11/8/19 4:26 AM, davidchien0327 via Groups.Io wrote:
Hi Steve 
When I try to apt-get update and upgrade
Then apt-get install DVswitch,the MB still old (built July-xx -2018),I try to reinstall repo with same result

I go to github and see MB only binary ,as my limited Linux knowledge ,I can not do The next

If possible please tell me how to do it 
Thanks 


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Steve N4IRS
 

Ernie,
What XLX server are you connecting to. What is the IP, Port and password?

Steve N4IRS

On 11/8/19 1:52 AM, Ernie Gm7kbk wrote:
Options=XLX:4005


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 9:21:10 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks




Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

David BV3UN
 

Hi Steve 
When I try to apt-get update and upgrade
Then apt-get install DVswitch,the MB still old (built July-xx -2018),I try to reinstall repo with same result

I go to github and see MB only binary ,as my limited Linux knowledge ,I can not do The next

If possible please tell me how to do it 
Thanks 


Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

Sorry my mistake  looked what I typed. It logs fine. Connects to 4000 first then goes to 4005. If there is no traffic it disconnects then reconnects. Looks like it needs a command to stay connected. All seen when debug is switched on.


From: Adrian <vk4tux@...>
Sent: Friday, November 8, 2019 7:23:16 AM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, So it is set 4005, but targets 4500 ? Have you tried another module number to compare ?

On 8/11/19 4:52 pm, Ernest Pratt wrote:
Options=XLX:4005


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 9:21:10 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.




Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

 

Options=XLX:4005


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 9:21:10 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks



Re: MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge

Adrian Fewster <vk4tux@...>
 

Ernest, What is your Option config ?

On 8/11/19 3:09 am, Ernest Pratt wrote:
Mb logs in with tg=4000 then sends tg=4500


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Ernie Gm7kbk <erniepratt@...>
Sent: Thursday, November 7, 2019 5:04:32 PM
To: Adrian <vk4tux@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
MB connects and will pass traffic. Then drops  with connection  to the master has timed out. Then reconnects.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 4:24:26 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Ok, on that, it appears to connect in two stages running a disconnect , then target ;

I: 2019-11-07 16:21:07.842 Starting M: 2019-11-07 16:21:26.821 DMR, Logged into the master successfully
M: 2019-11-07 16:21:26.821 DMR, Remote CMD: txTg=4000
M: 2019-11-07 16:21:26.821 DMR, Tune: id=5054444, tg=4000, mode=Group
M: 2019-11-07 16:21:26.822 DMR, Remote CMD: txTg=4017


On 8/11/19 1:37 am, Ernest Pratt wrote:
Thanks  Adrian.Will update to night.


From: Adrian <vk4tux@...>
Sent: Thursday, November 7, 2019 3:27:43 PM
To: Ernest Pratt <erniepratt@...>; main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 

Confirming V1.4 does work direct with XLX here. No DMRGateway needed.

On 8/11/19 1:21 am, Ernie Gm7kbk wrote:
At work at moment, will download in one hour  and test.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 3:05:10 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
Are you running the latest MMDVM_Bridge from github? I posted the latest 2 days ago.

On 11/7/2019 10:03 AM, Ernie Gm7kbk wrote:
I tried the other day to connect directly to my xlx server, and could not. Connected via hblink3 instead.  Mb says it connected but xlx  does not see the connection.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve N4IRS <szingman@...>
Sent: Thursday, November 7, 2019 2:39:56 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] MMDVM_BRIDGE and connect to XLX selected Module #mmdvm_bridge
 
David,
Yes the latest MMDVM_Bridge in github has all the current fixes. Please let me know your results.

Steve N4IRS

On 11/7/2019 9:35 AM, davidchien0327 via Groups.Io wrote:
Hi Steve and Mike

my i know the latest vesion of MMDVM Bridge had fix the problem that can not connect select XLX DMR module ? i am wait for it to bridge BM DMR to XLX DMR module
thanks


4781 - 4800 of 9925