Date   

Re: P25 North America reflector

Steve N4IRS
 

So,
I have had NO response from anyone who can test a change to MMDVMHost. I'll make it a little easier. I will provide a ARM or x86 binary. I can't provide a binary for anyone running Pi-Star at this time. 
For people reporting packet loss from the Pi-Ster dashboard, check your raw MMDVMHost log for the error message:
E: 2021-09-18 13:40:19.719 P25, overflow in the P25 RF queue
This is a good indication of what is happening.

Here is a comparison of 2 logs:
Stock Pi-Star
M: 2021-09-18 13:55:21.540 P25, received network transmission from KB0AJQ to TG 10200
M: 2021-09-18 13:55:27.401 P25, network end of transmission from KB0AJQ to TG 10200, 6.5 seconds, 5% packet loss

Modified MMDVMHost
M: 2021-09-18 13:55:21.549 P25, received network transmission from 3129130 to TG 10200
M: 2021-09-18 13:55:27.406 P25, network end of transmission from 3129130 to TG 10200, 6.1 seconds, 0% packet loss

I am running a STM32-DVM modem on a CDM repeater. I am listening on a Kenwood  NX-5300 This is running the modified code.
 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Todd, KB7RQQ
 

Got it running! USRP audio ports were crossed on the P25 side of Analog_Bridge.  Thanks!

Todd KB7RQQ



On 9/16/2021 9:51 AM, Todd, KB7RQQ wrote:

OK sounds good. Thank you.

On 9/16/2021 9:18 AM, Steve N4IRS wrote:
One suggestion, DVSwitch.ini should need little to no modification. You will be editing the AB ini files so, make your changes there and leave DVswitch.ini stock.

Steve

On 9/16/2021 11:30 AM, Todd, KB7RQQ wrote:

Great diagram! Think I saw that at one point early on and forgot about it.  I think I'm armed with the tools I need to figure this out.  Still learning and even though this is challenging (for me)... I'm having fun. Thanks again for the tools and all the help.

Todd KB7RQQ

On 9/16/2021 8:23 AM, Steve N4IRS wrote:
<https://dvswitch.groups.io/g/main/wiki/9379>

On 9/16/2021 10:43 AM, Todd, KB7RQQ wrote:
OK... going through it again. 



Re: Macro result was 512 #analog_bridge

Geoff
 

Steve,

Don't quite understand what you mean. Not from a Linux background and my knowledge is very limited. Sorry for that.

I tried to add one more TG in the macro D script, and it failed to execute.
As soon as I removed a TG, it started to work as normal.
So there is something that has something to do with the length of the script.

Thank you.
Geoff

On Fri, Sep 17, 2021 at 09:21 AM, Steve N4IRS wrote:
I don't know of a limitation on size, but it's possible. Put the command in a script and cal teh script from dvsm.macro

On 9/16/21 6:17 PM, Geoff wrote:
Steve,

To answer your question, the latest version of MMDVM_Bridge (V1.6.8) installed to /opt/MMDVM_Bridge.
dvswitch.sh is in /opt/Analog_Bridge not in /opt/MMDVM_Bridge so it is in one location only.
The version of dvswitch is v1.6.1.

What I have tried a few different things this morning :-
 
C=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS2_1=450;TS2_2=518"
D=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS1_1=5;TS2_1=505;TS2_2=3802;TS2_3=3803"

Above two macro scripts are the original in dvsm.macro file.
I have renamed C to D and D to C and tried to execute the macro D connects buit not C.

It seemed that there is something wrong with the macro D script.
I then tried to shorten the macro D script to :-

D=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS2_1=505;TS2_2=3802"

Now, I don't have any issues and connects to D. I have tried multiple times and every time it connects.

What does this tell?

I don't think there was any syntax error in my original macro D script.
I just had to remove a couple of TGs to get the D working.

Is there any restriction as to how long a script can be?

Thank you.

 Steve,

"I don't know of a limitation on size, but it's possible. Put the command in a script and cal teh script from dvsm.macro"


Re: Macro result was 512 #analog_bridge

Steve N4IRS
 

I don't know of a limitation on size, but it's possible. Put the command in a script and cal teh script from dvsm.macro

On 9/16/21 6:17 PM, Geoff wrote:
Steve,

To answer your question, the latest version of MMDVM_Bridge (V1.6.8) installed to /opt/MMDVM_Bridge.
dvswitch.sh is in /opt/Analog_Bridge not in /opt/MMDVM_Bridge so it is in one location only.
The version of dvswitch is v1.6.1.

What I have tried a few different things this morning :-
 
C=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS2_1=450;TS2_2=518"
D=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS1_1=5;TS2_1=505;TS2_2=3802;TS2_3=3803"

Above two macro scripts are the original in dvsm.macro file.
I have renamed C to D and D to C and tried to execute the macro D connects buit not C.

It seemed that there is something wrong with the macro D script.
I then tried to shorten the macro D script to :-

D=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS2_1=505;TS2_2=3802"

Now, I don't have any issues and connects to D. I have tried multiple times and every time it connects.

What does this tell?

I don't think there was any syntax error in my original macro D script.
I just had to remove a couple of TGs to get the D working.

Is there any restriction as to how long a script can be?

Thank you.


Re: Macro result was 512 #analog_bridge

Geoff
 

Steve,

To answer your question, the latest version of MMDVM_Bridge (V1.6.8) installed to /opt/MMDVM_Bridge.
dvswitch.sh is in /opt/Analog_Bridge not in /opt/MMDVM_Bridge so it is in one location only.
The version of dvswitch is v1.6.1.

What I have tried a few different things this morning :-
 
C=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS2_1=450;TS2_2=518"
D=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS1_1=5;TS2_1=505;TS2_2=3802;TS2_3=3803"

Above two macro scripts are the original in dvsm.macro file.
I have renamed C to D and D to C and tried to execute the macro D connects buit not C.

It seemed that there is something wrong with the macro D script.
I then tried to shorten the macro D script to :-

D=sudo /opt/Analog_Bridge/dvswitch.sh tune "PASSWORD@...:55555:StartRef=4570;RelinkTime=120;UserLink=1;TS2_1=505;TS2_2=3802"

Now, I don't have any issues and connects to D. I have tried multiple times and every time it connects.

What does this tell?

I don't think there was any syntax error in my original macro D script.
I just had to remove a couple of TGs to get the D working.

Is there any restriction as to how long a script can be?

Thank you.


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Todd, KB7RQQ
 

OK sounds good. Thank you.

On 9/16/2021 9:18 AM, Steve N4IRS wrote:
One suggestion, DVSwitch.ini should need little to no modification. You will be editing the AB ini files so, make your changes there and leave DVswitch.ini stock.

Steve

On 9/16/2021 11:30 AM, Todd, KB7RQQ wrote:

Great diagram! Think I saw that at one point early on and forgot about it.  I think I'm armed with the tools I need to figure this out.  Still learning and even though this is challenging (for me)... I'm having fun. Thanks again for the tools and all the help.

Todd KB7RQQ

On 9/16/2021 8:23 AM, Steve N4IRS wrote:
<https://dvswitch.groups.io/g/main/wiki/9379>

On 9/16/2021 10:43 AM, Todd, KB7RQQ wrote:
OK... going through it again. 



Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Steve N4IRS
 

One suggestion, DVSwitch.ini should need little to no modification. You will be editing the AB ini files so, make your changes there and leave DVswitch.ini stock.

Steve

On 9/16/2021 11:30 AM, Todd, KB7RQQ wrote:

Great diagram! Think I saw that at one point early on and forgot about it.  I think I'm armed with the tools I need to figure this out.  Still learning and even though this is challenging (for me)... I'm having fun. Thanks again for the tools and all the help.

Todd KB7RQQ

On 9/16/2021 8:23 AM, Steve N4IRS wrote:
<https://dvswitch.groups.io/g/main/wiki/9379>

On 9/16/2021 10:43 AM, Todd, KB7RQQ wrote:
OK... going through it again. 



Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Todd, KB7RQQ
 

Great diagram! Think I saw that at one point early on and forgot about it.  I think I'm armed with the tools I need to figure this out.  Still learning and even though this is challenging (for me)... I'm having fun. Thanks again for the tools and all the help.

Todd KB7RQQ

On 9/16/2021 8:23 AM, Steve N4IRS wrote:
<https://dvswitch.groups.io/g/main/wiki/9379>

On 9/16/2021 10:43 AM, Todd, KB7RQQ wrote:
OK... going through it again. 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Steve N4IRS
 

On 9/16/2021 10:43 AM, Todd, KB7RQQ wrote:
OK... going through it again. 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Todd, KB7RQQ
 

OK... going through it again. 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Steve N4IRS
 

DVSwitch.ini defines the AMBE_audio ports AB connects to for each mode.

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Todd, KB7RQQ <toddholzman@...>
Sent: Thursday, September 16, 2021 10:32:32 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103
 
OK... maybe I need to map this out again.  Printing off the .ini's involved so I can follow the paths again. 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Todd, KB7RQQ
 

OK... maybe I need to map this out again.  Printing off the .ini's involved so I can follow the paths again. 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Steve N4IRS
 

It's a single instance of MB

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Todd, KB7RQQ <toddholzman@...>
Sent: Thursday, September 16, 2021 10:16:02 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103
 
Thanks Steve (again!)   Starting to make a little more sense now.  Was following some loose instructions that didn't mention two instances of MMDVM_Bridge being needed.  And I also don't remember getting into DVSwitch.ini.  

Here is my DVSwitch.ini.

; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or you can supply
;   an absolute path in the DVSWITCH environment variable, e.g:
;   DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
;   before executing MMDVM_Bridge
;
; Another method to set the enviorment variable is to use the systemd unit file
; by adding:
; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; to /lib/systemd/system/mmdvm_bridge.service
 
; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
address = 0.0.0.0               ; Address to send IMBE TLV frames to (export)
txPort = 34103                  ; Port to send IMBE TLV frames to (export)
rxPort = 34100                  ; Port to listen for IMBE TLV frames on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)
logLevel = 2                    ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
logFilePath = /var/log/dvswitch/Quantar_Bridge.log
 
; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 31100                  ; Port to send AMBE TLV frames to (export)
rxPort = 31103                  ; Port to listen on (import)
slot = 2                        ; Export slot
exportTG = 0                    ; Which TG to export 
hangTimerInFrames = 0 ; Use 50 for 3 seconds of hang time (3000 / 60) 
talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini
 
; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 32100                  ; Port to send AMBE TLV frames to (export)
rxPort = 32103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 54321 ; Port to send Gateway commands to
message = %location %description ; Get location and description from MMDVM_Bridge.ini
 
; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 33100                  ; Port to send AMBE TLV frames to (export)
rxPort = 33103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
nxdnFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
slot = 2                        ; Export slot
RemotePort = 6075 ; Port to send Gateway commands to
 
; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 34100                  ; Port to send AMBE TLV frames to (export)
rxPort = 34103                  ; Port to listen on (import)
slot = 2                        ; Export slot
RemotePort = 6074 ; Port to send Gateway commands to
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 35100                  ; Port to send AMBE TLV frames to (export)
rxPort = 35103                  ; Port to listen on (import)
txWidePort = 35105 ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 6073 ; Port to send Gateway commands to
 
; Configure the BrandMeister connection
; Simple Terminal Feature Update
; Audio format is AMBE 72 bit
[STFU]                          ; Brandmeister Open DMR Terminal (ODMRT) Protocol
BMAddress = 3102.repeater.net   ; Brandmeister ODMRT server address
BMPort = 54006                  ; Brandmeister ODMRT port
BMPassword = passw0rd           ; Your Brandmeister password
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort  = 36100                 ; Port to send AMBE TLV frames to (export)
rxPort  = 36103                 ; Port to listen on (import)
UserID  = 123456789             ; Your DMR ID + SSID
TalkerAlias = N0CALL Name City  ; Max 27 characters
StartTG = 3166                  ; Startup talk group
LogLevel = 3                    ; STFU log level (0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error)
 
[ASL]
address = 127.0.0.1
txPort = 30100
rxPort = 30103
 


Re: P25 to DMR troubles. error at MMDVM_Bridge - Cannot bind UDP address, err: 98 -and- Cannot open listener port 34103

Todd, KB7RQQ
 

Thanks Steve (again!)   Starting to make a little more sense now.  Was following some loose instructions that didn't mention two instances of MMDVM_Bridge being needed.  And I also don't remember getting into DVSwitch.ini.  

Here is my DVSwitch.ini.

; MMDVM_Bridge export / import configuration file.
;   This file should be placed along side of MMDVM_Bridge or you can supply
;   an absolute path in the DVSWITCH environment variable, e.g:
;   DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
;   before executing MMDVM_Bridge
;
; Another method to set the enviorment variable is to use the systemd unit file
; by adding:
; Environment=DVSWITCH=/etc/MMDVM_Bridge/DVSwitch.ini
; to /lib/systemd/system/mmdvm_bridge.service
 
; Configure the Quantar Repeater Partner
; Note that the TX and RX ports are already reversed for MMDVM_Bridge <--> Quantar_Bridge
[QUANTAR]
address = 0.0.0.0               ; Address to send IMBE TLV frames to (export)
txPort = 34103                  ; Port to send IMBE TLV frames to (export)
rxPort = 34100                  ; Port to listen for IMBE TLV frames on (import)
quantarPort = 1994              ; HDLC frames To/From the Quantar repeater
debug = 0                       ; Debug 0 = off, 1 = on (adds lots of additional messages)
logLevel = 2                    ; Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
logFilePath = /var/log/dvswitch/Quantar_Bridge.log
 
; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 31100                  ; Port to send AMBE TLV frames to (export)
rxPort = 31103                  ; Port to listen on (import)
slot = 2                        ; Export slot
exportTG = 0                    ; Which TG to export 
hangTimerInFrames = 0 ; Use 50 for 3 seconds of hang time (3000 / 60) 
talkerAlias = %callsign %location %description ; Get callsign location and description from MMDVM_Bridge.ini
 
; Configure the D-Star Partner
; Audio format is AMBE 48 bit (DSAMBE)
[DSTAR]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 32100                  ; Port to send AMBE TLV frames to (export)
rxPort = 32103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 54321 ; Port to send Gateway commands to
message = %location %description ; Get location and description from MMDVM_Bridge.ini
 
; Configure the NXDN Partner
; Audio format is AMBE 72 bit
[NXDN]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 33100                  ; Port to send AMBE TLV frames to (export)
rxPort = 33103                  ; Port to listen on (import)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
nxdnFallbackID  = 12345         ; Use this ID when the input DMR ID is not found in the database
translate = 1234=4321           ; Translate NXDN TG < -- > DMR TG (bidirectional)
slot = 2                        ; Export slot
RemotePort = 6075 ; Port to send Gateway commands to
 
; Configure the P25 Partner
; Audio format is IMBE 88 bit
[P25]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 34100                  ; Port to send AMBE TLV frames to (export)
rxPort = 34103                  ; Port to listen on (import)
slot = 2                        ; Export slot
RemotePort = 6074 ; Port to send Gateway commands to
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort = 35100                  ; Port to send AMBE TLV frames to (export)
rxPort = 35103                  ; Port to listen on (import)
txWidePort = 35105 ; Port to send IMBE TLV frames to for YSFw (export)
fallbackID = 1234567            ; In case we can not find a valid DMR id in the database, export this one
exportTG = 9                    ; Which TG to export
slot = 2                        ; Export slot
RemotePort = 6073 ; Port to send Gateway commands to
 
; Configure the BrandMeister connection
; Simple Terminal Feature Update
; Audio format is AMBE 72 bit
[STFU]                          ; Brandmeister Open DMR Terminal (ODMRT) Protocol
BMAddress = 3102.repeater.net   ; Brandmeister ODMRT server address
BMPort = 54006                  ; Brandmeister ODMRT port
BMPassword = passw0rd           ; Your Brandmeister password
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
txPort  = 36100                 ; Port to send AMBE TLV frames to (export)
rxPort  = 36103                 ; Port to listen on (import)
UserID  = 123456789             ; Your DMR ID + SSID
TalkerAlias = N0CALL Name City  ; Max 27 characters
StartTG = 3166                  ; Startup talk group
LogLevel = 3                    ; STFU log level (0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error)
 
[ASL]
address = 127.0.0.1
txPort = 30100
rxPort = 30103
 


Re: Macro result was 512 #analog_bridge

Steve N4IRS
 

OK,
So we know the macro is firing the script. Macros A B and C run
The MMDVM_Bridge install moved  dvswitch.sh from /opt/Analog_Bridge to /opt/MMDVM_Bridge Do you have it in both locations? What is the version of dvswitch you are executing?

On 9/16/2021 8:09 AM, Geoff wrote:
It created an out.txt file in /tmp containing a text "version"


Re: Macro result was 512 #analog_bridge

Geoff
 

It created an out.txt file in /tmp containing a text "version"


Re: Macro result was 512 #analog_bridge

Steve N4IRS
 

OK,
Try this:
D=sudo echo version >/tmp/out.txt

On 9/16/2021 7:21 AM, Geoff wrote:
I have attached two copies of dvsm.macro files.
One is mine and the other is for one of the user's


Re: Macro result was 512 #analog_bridge

Geoff
 

I have attached two copies of dvsm.macro files.
One is mine and the other is for one of the user's


Re: Macro result was 512 #analog_bridge

Steve N4IRS
 

Show your dvsm.macro

On 9/16/21 7:00 AM, Geoff wrote:
Steve,

I am running a multi user server (DVLink). I have no problems using the macro to change DMR servers using other user's account.
To give you an insight of what I have done to my server, I have recently updated dvswitch.sh to v1.6.1 from v1.5.9 and also updated MMDVM_Bridge to the latest v.1.6.8.
I have not updated  other users' dvswitch.sh but updated MMDVM_Bridge to the latest.
So only difference is that as a main user myself I am using dvswitch v1.6.1 and the rest of the users are still using dvswitch.sh v 1.5.9
I wonder if I need to revert to dvswitch v1.5.9.
Hope that helps.


Re: Macro result was 512 #analog_bridge

Geoff
 

Steve,

I am running a multi user server (DVLink). I have no problems using the macro to change DMR servers using other user's account.
To give you an insight of what I have done to my server, I have recently updated dvswitch.sh to v1.6.1 from v1.5.9 and also updated MMDVM_Bridge to the latest v.1.6.8.
I have not updated  other users' dvswitch.sh but updated MMDVM_Bridge to the latest.
So only difference is that as a main user myself I am using dvswitch v1.6.1 and the rest of the users are still using dvswitch.sh v 1.5.9
I wonder if I need to revert to dvswitch v1.5.9.
Hope that helps.

61 - 80 of 9814