Date   

Re: Fusion node lists and tune string

G4WXN@...
 

This is a fresh install, only 5 weeks old.

I do have a DD image of the card, so could try that.


--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

All I can suggest at this point is a fresh install.

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: Monday, April 26, 2021 7:33:02 AM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Fusion node lists and tune string
 
Thanks output as requested.
-------------------------------
sudo netstat -unap
 
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           437/avahi-daemon: r 
udp        0      0 0.0.0.0:35100           0.0.0.0:*                           1125/Analog_Bridge  
udp        0      0 0.0.0.0:35103           0.0.0.0:*                           1490/MMDVM_Bridge   
udp        0      0 0.0.0.0:10022           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30001           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30002           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30003           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30004           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30005           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30006           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30007           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30051           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30052           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30053           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30054           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30055           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30056           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30057           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:46990           0.0.0.0:*                           437/avahi-daemon: r 
udp        0      0 0.0.0.0:2470            0.0.0.0:*                           452/qemu-arm-static 
udp        0      0 0.0.0.0:46001           0.0.0.0:*                           1125/Analog_Bridge  
udp        0      0 0.0.0.0:6073            0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:6074            0.0.0.0:*                           1140/P25Gateway     
udp        0      0 0.0.0.0:6075            0.0.0.0:*                           1134/NXDNGateway    
udp        0      0 0.0.0.0:42000           0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:42001           0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:44057           0.0.0.0:*                           1125/Analog_Bridge  
udp        0      0 0.0.0.0:42010           0.0.0.0:*                           1140/P25Gateway     
udp        0      0 0.0.0.0:42011           0.0.0.0:*                           1139/P25Parrot      
udp        0      0 0.0.0.0:42012           0.0.0.0:*                           1133/YSFParrot      
udp        0      0 0.0.0.0:20001           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20002           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20003           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20004           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:42020           0.0.0.0:*                           1140/P25Gateway     
udp        0      0 0.0.0.0:20005           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:42021           0.0.0.0:*                           1127/NXDNParrot     
udp        0      0 0.0.0.0:20006           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20007           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 127.0.0.1:20010         0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:40000           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           454/dhcpcd          
udp        0      0 127.0.0.1:4200          0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:631             0.0.0.0:*                           1359/cups-browsed   
udp        0      0 0.0.0.0:3200            0.0.0.0:*                           1490/MMDVM_Bridge   
udp        0      0 0.0.0.0:2222            0.0.0.0:*                           1128/node           
udp        0      0 0.0.0.0:14020           0.0.0.0:*                           1134/NXDNGateway    
udp        0      0 0.0.0.0:14050           0.0.0.0:*                           1134/NXDNGateway    
udp6       0      0 :::5353                 :::*                                437/avahi-daemon: r 
udp6       0      0 :::33898                :::*                                437/avahi-daemon: r 
-------------------------------------------------------

By YSFGateway startup, I assume you mean the ini file

-----------------
[General]
Callsign=G4WXN
Suffix=RPT
# Suffix=ND
Id=235242110
RptAddress=127.0.0.1
RptPort=3200
LocalAddress=127.0.0.1
LocalPort=4200
Daemon=0
 
[Info]
RXFrequency=430123456
TXFrequency=430123456
Power=0
Latitude=52.442409
Longitude=0.598415
Height=1
Location=Brandon, Suffolk
Description=England
URL=bsears.co.uk
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=YSFGateway
 
[aprs.fi]
Enable=0
# Server=noam.aprs2.net
Server=euro.aprs2.net
Port=14580
Password=9999
Description=APRS Description
Suffix=Y
 
[Network]
# Startup=FCS00120
# Startup=Alabama-Link
InactivityTimeout=10
Revert=0
Debug=0
 
[YSF Network]
Enable=1
Port=42000
Hosts=/var/lib/mmdvm/YSFHosts.txt
ReloadTime=60
ParrotAddress=127.0.0.1
ParrotPort=42012
# YSF2DMRAddress=127.0.0.1
# YSF2DMRPort=42013
# YSF2NXDNAddress=127.0.0.1
# YSF2NXDNPort=42014
# YSF2P25Address=127.0.0.1
# YSF2P25Port=42015
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42001
 
[Remote Commands]
Enable=1
Port=6073
--------------------

Thanks again.

 
--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

Thanks output as requested.
-------------------------------
sudo netstat -unap
 
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name    
udp        0      0 0.0.0.0:5353            0.0.0.0:*                           437/avahi-daemon: r 
udp        0      0 0.0.0.0:35100           0.0.0.0:*                           1125/Analog_Bridge  
udp        0      0 0.0.0.0:35103           0.0.0.0:*                           1490/MMDVM_Bridge   
udp        0      0 0.0.0.0:10022           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30001           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30002           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30003           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30004           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30005           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30006           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30007           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30051           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30052           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30053           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30054           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30055           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30056           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:30057           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:46990           0.0.0.0:*                           437/avahi-daemon: r 
udp        0      0 0.0.0.0:2470            0.0.0.0:*                           452/qemu-arm-static 
udp        0      0 0.0.0.0:46001           0.0.0.0:*                           1125/Analog_Bridge  
udp        0      0 0.0.0.0:6073            0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:6074            0.0.0.0:*                           1140/P25Gateway     
udp        0      0 0.0.0.0:6075            0.0.0.0:*                           1134/NXDNGateway    
udp        0      0 0.0.0.0:42000           0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:42001           0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:44057           0.0.0.0:*                           1125/Analog_Bridge  
udp        0      0 0.0.0.0:42010           0.0.0.0:*                           1140/P25Gateway     
udp        0      0 0.0.0.0:42011           0.0.0.0:*                           1139/P25Parrot      
udp        0      0 0.0.0.0:42012           0.0.0.0:*                           1133/YSFParrot      
udp        0      0 0.0.0.0:20001           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20002           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20003           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20004           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:42020           0.0.0.0:*                           1140/P25Gateway     
udp        0      0 0.0.0.0:20005           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:42021           0.0.0.0:*                           1127/NXDNParrot     
udp        0      0 0.0.0.0:20006           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:20007           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 127.0.0.1:20010         0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:40000           0.0.0.0:*                           1129/ircddbgatewayd 
udp        0      0 0.0.0.0:68              0.0.0.0:*                           454/dhcpcd          
udp        0      0 127.0.0.1:4200          0.0.0.0:*                           1131/YSFGateway     
udp        0      0 0.0.0.0:631             0.0.0.0:*                           1359/cups-browsed   
udp        0      0 0.0.0.0:3200            0.0.0.0:*                           1490/MMDVM_Bridge   
udp        0      0 0.0.0.0:2222            0.0.0.0:*                           1128/node           
udp        0      0 0.0.0.0:14020           0.0.0.0:*                           1134/NXDNGateway    
udp        0      0 0.0.0.0:14050           0.0.0.0:*                           1134/NXDNGateway    
udp6       0      0 :::5353                 :::*                                437/avahi-daemon: r 
udp6       0      0 :::33898                :::*                                437/avahi-daemon: r 
-------------------------------------------------------

By YSFGateway startup, I assume you mean the ini file

-----------------
[General]
Callsign=G4WXN
Suffix=RPT
# Suffix=ND
Id=235242110
RptAddress=127.0.0.1
RptPort=3200
LocalAddress=127.0.0.1
LocalPort=4200
Daemon=0
 
[Info]
RXFrequency=430123456
TXFrequency=430123456
Power=0
Latitude=52.442409
Longitude=0.598415
Height=1
Location=Brandon, Suffolk
Description=England
URL=bsears.co.uk
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=YSFGateway
 
[aprs.fi]
Enable=0
# Server=noam.aprs2.net
Server=euro.aprs2.net
Port=14580
Password=9999
Description=APRS Description
Suffix=Y
 
[Network]
# Startup=FCS00120
# Startup=Alabama-Link
InactivityTimeout=10
Revert=0
Debug=0
 
[YSF Network]
Enable=1
Port=42000
Hosts=/var/lib/mmdvm/YSFHosts.txt
ReloadTime=60
ParrotAddress=127.0.0.1
ParrotPort=42012
# YSF2DMRAddress=127.0.0.1
# YSF2DMRPort=42013
# YSF2NXDNAddress=127.0.0.1
# YSF2NXDNPort=42014
# YSF2P25Address=127.0.0.1
# YSF2P25Port=42015
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42001
 
[Remote Commands]
Enable=1
Port=6073
--------------------

Thanks again.

 
--
Derek

G4WXN


Re: DVSwitch server shutdown

IK7VXC Mike
 

Thank you Steve, I will try that!

Mike IK7VXC


Re: DVSwitch server shutdown

Steve N4IRS
 

As root:
shutdown

Steve N4IRS

On 4/26/21 2:34 AM, IK7VXC Mike wrote:
Hi, I've been using DVSwitch server for a while now and everything is good.

However I can't seem to find a way to gently shut it down when I want to. Either if I use the shutdown menu or just pull the plug, at next reboot I'm forced to go through the Initial Configuration script to make it work again.

Is there a proper way to shut down the raspberry?
Thank you
IK7VXC Mike


DVSwitch server shutdown

IK7VXC Mike
 

Hi, I've been using DVSwitch server for a while now and everything is good.

However I can't seem to find a way to gently shut it down when I want to. Either if I use the shutdown menu or just pull the plug, at next reboot I'm forced to go through the Initial Configuration script to make it work again.

Is there a proper way to shut down the raspberry?
Thank you
IK7VXC Mike


Re: STFU

Jorge (George)
 

Thanks, i'll wait


Re: STFU

Steve N4IRS
 

Jorge,
There is nothing wrong with your configuration. BM in their infinite wisdom, had made a change to ODMRTP without notification. We will be putting out an update soon.

Steve N4IRS

On 4/24/21 2:17 PM, Jorge (George) wrote:

Hi Steve

I have the STFU connected to the master, accept the change of TG's, I listen perfectly to the communications, the problem arises when TX, the stfu sends the selected TG but without defining the type of call, whether group,  private or any other, results in a code 34 on the side of the BM dashboard (unknow type). Another strange point, I appear without the information of the sender, repeater ID even though in DVSwitch.ini it has the ID + ESID.

Can you check where is the mistake.

 

dvswicth

[STFU]                          ; Brandmeister Open DMR Terminal (ODMRT) Protocol

BMAddress = bm2682.brandmeister.pt   ; Brandmeister ODMRT server address

BMPort = 54006                  ; Brandmeister ODMRT port

BMPassword = xxxxxxx         ; Your Brandmeister password

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

txPort  = 36100                 ; Port to send AMBE TLV frames to (export)

rxPort  = 36103                 ; Port to listen on (import)

UserID  = 268300701             ; Your DMR ID + SSID

TalkerAlias = CT1JIB Jorge      ; Max 27 characters

StartTG = 915                   ; Startup talk group

LogLevel = 1                    ; STFU log level (0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error)

 

 

 



Re: STFU

Jorge (George)
 

Hi Steve

I have the STFU connected to the master, accept the change of TG's, I listen perfectly to the communications, the problem arises when TX, the stfu sends the selected TG but without defining the type of call, whether group,  private or any other, results in a code 34 on the side of the BM dashboard (unknow type). Another strange point, I appear without the information of the sender, repeater ID even though in DVSwitch.ini it has the ID + ESID.

Can you check where is the mistake.

 

dvswicth

[STFU]                          ; Brandmeister Open DMR Terminal (ODMRT) Protocol

BMAddress = bm2682.brandmeister.pt   ; Brandmeister ODMRT server address

BMPort = 54006                  ; Brandmeister ODMRT port

BMPassword = xxxxxxx         ; Your Brandmeister password

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

txPort  = 36100                 ; Port to send AMBE TLV frames to (export)

rxPort  = 36103                 ; Port to listen on (import)

UserID  = 268300701             ; Your DMR ID + SSID

TalkerAlias = CT1JIB Jorge      ; Max 27 characters

StartTG = 915                   ; Startup talk group

LogLevel = 1                    ; STFU log level (0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error)

 

 

 


Re: STFU

f0dei
 

Hi,

Debian running on a VPS server.

Linux vps-1111111 4.19.0-16-cloud-amd64 #1 SMP Debian 4.19..181.1-1 (2021-03-19) x86_64 GNU/Linux

73
Toufik, F0DEI


Re: STFU

Steve N4IRS
 

What version of the OS are you running? Show the output of:
uname -a

Steve N4IRS

On 4/23/21 11:04 PM, f0dei wrote:
Hi,

Repeaters are Hytera RD985 and RD985S

master.bm262.de :

1:  I don't heard audio on Hytera and Motorola radios and did not see ID or talkeralias

2:  I heard audio and see talkeralias on Kenwood NX5300  (Note: Kenwood decode the incoming signal as Broadcast  Call "NOT" Group Call)

3:  I heard audio on Anytone AT-868 (no ID, no talkeralias)

From RF side to STFU (it work fine)

3102.repeater.net

1:  I don't heard audio on Hytera and Motorola radios and did not see ID or talkeralias

2:  I heard audio and see talkeralias on Kenwood NX5300  (Note: Kenwood decode the incoming signal as  Emergency Group Call)

3: I heard audio on Anytone AT-868 (no ID, no talkeralias)

From RF side to STFU (it work fine)

See attached pictures, but it's really not easy to debug

73
Toufik, F0DEI


Re: DVSwitch Dasboard with HBmonitor

f5ore@...
 

Steve
Thank you very much, I found it!
This is webproxy which used the same port as HBmonitor (8080)
I stopped webproxy
73 Alain / F5ORE


Re: DVSwitch Dasboard with HBmonitor

Steve N4IRS
 

DVSwitch Dashboard does not use port 9000. You can stop the dashboard with:
systemctl stop lighttpd
systemctl disable lighttpd

netstat -tnap will tell you what is using port 9000

On 4/24/21 10:45 AM, f5ore via groups.io wrote:
I installed DVSwitch-System-Builder on a VPS .
Now I don't have the HBmonitor dasboard anymore because it uses the same port 9000 :
 
  File "/usr/local/lib/python3.7/dist-packages/twisted/internet/tcp.py", line 1329, in startListening
    raise CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on any:9000: [Errno 98] Address already in use.
 
How can I remove only the DVSwitch Dashboard?
 
73 Alain / F5ORE


DVSwitch Dasboard with HBmonitor

f5ore@...
 

I installed DVSwitch-System-Builder on a VPS .
Now I don't have the HBmonitor dasboard anymore because it uses the same port 9000 :
 
  File "/usr/local/lib/python3.7/dist-packages/twisted/internet/tcp.py", line 1329, in startListening
    raise CannotListenError(self.interface, self.port, le)
twisted.internet.error.CannotListenError: Couldn't listen on any:9000: [Errno 98] Address already in use.
 
How can I remove only the DVSwitch Dashboard?
 
73 Alain / F5ORE


ASL <==> Analog_Bridge (Callsign)

Bruno
 

Hi,
Well done for the devs who are really good qualities.
Do we have the possibility to send the callsigns from the Node ASL to Analog_bridge, MMDVM_Bridge and vice versa.
--
73 to all.
F1PTL Bruno


Re: STFU

f0dei
 
Edited

Hi,

Repeaters are Hytera RD985 and RD985S

master.bm262.de :

1:  I don't heard audio on Hytera and Motorola radios and did not see ID or talkeralias

2:  I heard audio and see talkeralias on Kenwood NX5300  (Note: Kenwood decode the incoming signal as Broadcast  Call "NOT" Group Call)

3:  I heard audio on Anytone AT-868 (no ID, no talkeralias)

From RF side to STFU (it work fine)

3102.repeater.net

1:  I don't heard audio on Hytera and Motorola radios and did not see ID or talkeralias

2:  I heard audio and see talkeralias on Kenwood NX5300  (Note: Kenwood decode the incoming signal as  Emergency Group Call)

3: I heard audio on Anytone AT-868 (no ID, no talkeralias)

From RF side to STFU (it work fine)

See attached pictures, but it's really not easy to debug

73
Toufik, F0DEI


Re: STFU

Steve N4IRS
 

So,
I need to clear something up. You are not hearing the audio on Motorola and Hytera radios?
What is the transmitter? MMDVM? Motorola repeater? Hytera repeater? We will be doing some testing over the next few days.

Steve N4IRS

On 4/22/21 3:30 PM, f0dei wrote:
yes, 7 digit  (2080360) but it's not working.

KENWOOD NX5300 decode as Broadcast call 
(not decode every Time)
HYTERA and Motorola decode nothing.



Re: Help with multiple instances of DV Switch

Alex MM7BDW
 

Hi Steve, 

I've managed to get it working by adding the NNX node. All seems fine. RX and TX on both DMR networks. My final question, which probably isn't for this group is, how do I deal with things such as setting a manager.conf password and changing the bind address of the NNX node number so that I can view and control from Supermon. Normally I could do this no problem and know where to go to setup such things but as I have only added this node to the existing public one, I have no access to its own rpt.conf, manager.conf etc

Alex


Re: Help with multiple instances of DV Switch

Steve N4IRS
 

Alex,
One thing we just discovered is that if you use a NNX for your private node number, you have to be careful how you connect to it. For example:
Public node 2148
NNX node 21489

2148 registers with allstarlink, 21489 does not.

There are 2 ways to connect your public to your private node. By convention you have the three functions: *3 *2 and *1 Normally you would send *321489 from a DTMF pad or rpt fun 2148 *321489 from the CLI. Well, *321489 does not work. We think because how AllStar parses the dial string. It seems to stop at 2148 and fail. All is not lost, you can still connect from the CLI. You can also create a custom command to do it:
819 = cmd,# rpt cmd 2148 ilink 3 21489  

*221489 disconnect you.

Steve N4IRS

On 4/23/2021 10:06 AM, Alex MM7BDW wrote:
So Steve if I am understanding correctly. If I add a private node to my already existing configuration for the public node on ASL, then I can create two instances of each (MB,AB and MD380) and configure this to look at the private node with different USRP ports?

I've already copied MB,AB and MD380 into new directories and named them "2" and changed all the ports in the respective ini's. I'm sure I have read a doc somewhere before about the private node setup so should be able to follow that from there. 

To sum up, I just need to have a private node setup within the existing rpt.conf and as long as the USRP ports are different from the original then this should work?

Thanks for your help Steve

Alex


Re: Help with multiple instances of DV Switch

Steve N4IRS
 

Yes, you are correct. I have one suggestion, Everything you will find on the net about adding a private node will suggest a node number below 2000 usually 1999. Though in most cases this will work fine, sometimes if 2 public nodes each having a private node 1999, you will have a problem disconnecting. I suggest you use the NNX numbering system to your advantage. If your public node is 2151 then append a singe digit to the node number. You can have 10 NNX nodes so I would suggest using 9. So, node 2151 and node 21519. If you don't like that, use a node number between 1 and 1999, just try to be unique. The other suggestion I have is since you already had a running AllStar <-> DMR bridge, use it to test your second bridge. You second AB will have unique USRP ports. Edit your existing rpt.conf and point it at the second AB. Make sure all works as expected. The swap the ports back. Now you can add your private node. Here are some links to help, though you will find the same info all over the net. <https://wiki.allstarlink.org/wiki/Two_Nodes_on_One_Server> This will help ytou configure the second node for a bridge <https://dvswitch.groups.io/g/allstarlink/wiki/9671>

Steve N4IRS

On 4/23/2021 10:06 AM, Alex MM7BDW wrote:
So Steve if I am understanding correctly. If I add a private node to my already existing configuration for the public node on ASL, then I can create two instances of each (MB,AB and MD380) and configure this to look at the private node with different USRP ports?

I've already copied MB,AB and MD380 into new directories and named them "2" and changed all the ports in the respective ini's. I'm sure I have read a doc somewhere before about the private node setup so should be able to follow that from there. 

To sum up, I just need to have a private node setup within the existing rpt.conf and as long as the USRP ports are different from the original then this should work?

Thanks for your help Steve

Alex

621 - 640 of 9797