Date   

Re: PTT Configuration

Cort N0MJS <n0mjs@...>
 

That is the comment from hb_confbridge’s sample configuration file – which is why I thought you were maybe using it. The one from DMRlink says “dmrlink” not “hblink”.

Also, I wrote the software. Please stop with the conjecture about how it was intended. Really, dude, I wrote it. I know what was intended.

You really need to slow your roll a bit. All of us deeply involved in the project are working professionals with full-time jobs, families etc. You’re really hitting us hard here with a lot of rapid fire “this won’t work” kind of stuff. Please take a little more time to methodically work through things and give clean, clear explanations of what you’re trying to do, and then wait for help.

I’m not going to be able to continue trying to help when you send 6-10 e-mails an hour.

Let’s stop taking this on a line-by-line in the configuration file style. Take a step back, explain clearly what you’re trying to do. At your current rate of e-mail, I will not be able to keep up trying to help.


On Apr 26, 2018, at 9:34 AM, Jamie R. Cid <jay@...> wrote:


Right and per this I dont think it will work...

SYSTEM - The name of the sytem as listed in the main hblink configuration file

Cort Buffington
785-865-7206


Re: PTT Configuration

Jamie R. Cid <jay@...>
 
Edited

So, Looking at confbridge_rules_SAMPLE.py i see the systems listed and assuming based on what you said I need my repeater listing in there and add a NEW IPSC entry for the bridge?

Do you have an example of this somewhere?


Re: PTT Configuration

Jamie R. Cid <jay@...>
 

SO my xpr repeater is an IPSC client. I referring to anything that will allow me to create my own PTT type setup within the system given the fact that I am essentially running the system in reverse of the way it was designed i think? lol..

SO Im open to any suggestions and ideas.. ;)

BM <---> HB_Bridge <---> IPSC_Bridge <---> Motorola TRBO Repeater. 


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:31 AM
Subject: Re: [DVSwitch] PTT Configuration

So I’ve been talking about confbridge.py, are you talking about hb_confbridge.py?

They’re not the same thing.

confbridge.py is the IPSC version
hb_confbridge.py is the HBP version

On Apr 26, 2018, at 9:19 AM, Jamie R. Cid <jay@...> wrote:

Right and per this I dont think it will work...

SYSTEM - The name of the sytem as listed in the main hblink configuration file (e.g. hblink.cfg) (This isnt the IPSC side..)

BRIDGES = {
    'WORLDWIDE': [
            {'SYSTEM': 'MASTER-1',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
            {'SYSTEM': 'CLIENT-1',    'TS': 1, 'TGID': 3100, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:17 AM
Subject: Re: [DVSwitch] PTT Configuration

Nope – scratch that. I got confused thinking you were using the IPSC side with BM…. with MMDVM you won’t need multiple connections to BM.

On Apr 26, 2018, at 9:11 AM, Jamie R. Cid <jay@...> wrote:

"you need more than 2 TGIDs from BM"

I will have all the popular ones statically coming in ie: 310-319, 93,91,....... etc.. Is that what you are referring to?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:07 AM
Subject: Re: [DVSwitch] PTT Configuration

confbridge.py will have two IPSC systems configured, one for IPSC_Bridge and one for the repeater…. I you need more than 2 TGIDs from BM, you may actually have multiple IPSC systems configured for BM.

On Apr 26, 2018, at 8:55 AM, Jamie R. Cid <jay@...> wrote:

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},

Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Re: PTT Configuration

Cort N0MJS <n0mjs@...>
 

So I’ve been talking about confbridge.py, are you talking about hb_confbridge.py?

They’re not the same thing.

confbridge.py is the IPSC version
hb_confbridge.py is the HBP version

On Apr 26, 2018, at 9:19 AM, Jamie R. Cid <jay@...> wrote:

Right and per this I dont think it will work...

SYSTEM - The name of the sytem as listed in the main hblink configuration file (e.g. hblink.cfg) (This isnt the IPSC side..)

BRIDGES = {
    'WORLDWIDE': [
            {'SYSTEM': 'MASTER-1',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
            {'SYSTEM': 'CLIENT-1',    'TS': 1, 'TGID': 3100, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:17 AM
Subject: Re: [DVSwitch] PTT Configuration

Nope – scratch that. I got confused thinking you were using the IPSC side with BM…. with MMDVM you won’t need multiple connections to BM.

On Apr 26, 2018, at 9:11 AM, Jamie R. Cid <jay@...> wrote:

"you need more than 2 TGIDs from BM"

I will have all the popular ones statically coming in ie: 310-319, 93,91,....... etc.. Is that what you are referring to?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:07 AM
Subject: Re: [DVSwitch] PTT Configuration

confbridge.py will have two IPSC systems configured, one for IPSC_Bridge and one for the repeater…. I you need more than 2 TGIDs from BM, you may actually have multiple IPSC systems configured for BM.

On Apr 26, 2018, at 8:55 AM, Jamie R. Cid <jay@...> wrote:

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},

Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Re: PTT Configuration

Jamie R. Cid <jay@...>
 

Right and per this I dont think it will work...

SYSTEM - The name of the sytem as listed in the main hblink configuration file (e.g. hblink.cfg) (This isnt the IPSC side..)

BRIDGES = {
    'WORLDWIDE': [
            {'SYSTEM': 'MASTER-1',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
            {'SYSTEM': 'CLIENT-1',    'TS': 1, 'TGID': 3100, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:17 AM
Subject: Re: [DVSwitch] PTT Configuration

Nope – scratch that. I got confused thinking you were using the IPSC side with BM…. with MMDVM you won’t need multiple connections to BM.

On Apr 26, 2018, at 9:11 AM, Jamie R. Cid <jay@...> wrote:

"you need more than 2 TGIDs from BM"

I will have all the popular ones statically coming in ie: 310-319, 93,91,....... etc.. Is that what you are referring to?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:07 AM
Subject: Re: [DVSwitch] PTT Configuration

confbridge.py will have two IPSC systems configured, one for IPSC_Bridge and one for the repeater…. I you need more than 2 TGIDs from BM, you may actually have multiple IPSC systems configured for BM.

On Apr 26, 2018, at 8:55 AM, Jamie R. Cid <jay@...> wrote:

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},

Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Re: PTT Configuration

Cort N0MJS <n0mjs@...>
 

Nope – scratch that. I got confused thinking you were using the IPSC side with BM…. with MMDVM you won’t need multiple connections to BM.

On Apr 26, 2018, at 9:11 AM, Jamie R. Cid <jay@...> wrote:

"you need more than 2 TGIDs from BM"

I will have all the popular ones statically coming in ie: 310-319, 93,91,....... etc.. Is that what you are referring to?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:07 AM
Subject: Re: [DVSwitch] PTT Configuration

confbridge.py will have two IPSC systems configured, one for IPSC_Bridge and one for the repeater…. I you need more than 2 TGIDs from BM, you may actually have multiple IPSC systems configured for BM.

On Apr 26, 2018, at 8:55 AM, Jamie R. Cid <jay@...> wrote:

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},

Cort Buffington
785-865-7206


Cort Buffington
785-865-7206


Re: PTT Configuration

Jamie R. Cid <jay@...>
 

"you need more than 2 TGIDs from BM"

I will have all the popular ones statically coming in ie: 310-319, 93,91,....... etc.. Is that what you are referring to?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 10:07 AM
Subject: Re: [DVSwitch] PTT Configuration

confbridge.py will have two IPSC systems configured, one for IPSC_Bridge and one for the repeater…. I you need more than 2 TGIDs from BM, you may actually have multiple IPSC systems configured for BM.

On Apr 26, 2018, at 8:55 AM, Jamie R. Cid <jay@...> wrote:

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},

Cort Buffington
785-865-7206


Re: PTT Configuration

Cort N0MJS <n0mjs@...>
 

confbridge.py will have two IPSC systems configured, one for IPSC_Bridge and one for the repeater…. I you need more than 2 TGIDs from BM, you may actually have multiple IPSC systems configured for BM.

On Apr 26, 2018, at 8:55 AM, Jamie R. Cid <jay@...> wrote:

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},

Cort Buffington
785-865-7206


Re: PTT Configuration

Jamie R. Cid <jay@...>
 
Edited

Hi Cort,

Will confbridge work even though I only have just the one repeater entry listed in the IPSC Bridge? It looks like I need to specify two things in bridge no?

 {'SYSTEM': 'MASTER-1(not used)',    'TS': 1, 'TGID': 1,    'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [2,], 'OFF': [9,10]},
 {'SYSTEM': 'BRANDMEISTER',    'TS': 1, 'TGID': 310, 'ACTIVE': True, 'TIMEOUT': 2, 'TO_TYPE': 'ON',  'ON': [310,], 'OFF': [9,10]},


Re: PTT Configuration

Jamie R. Cid <jay@...>
 

Thanks Corey,

I am using BM but PTT don't seem to work and "wakeup" the TG's on BM. Also I appear to get TG's that should be on TS1 coming in on TS2.. I figured it was related to this,

DMRlink looks to the BM server as a "SmartPTT" connection. This is not like a Motorola, Hytera or even MMDVM. SmartPTT connections must be setup by a BM server administrator. The TS/TG mapping is not available to the repeater sysop. The TS/TG mapping is ALWAYS static, it can not be User Activated (PTT). SmartPTT connections will not dynamically create a TS/TG map.

BM will send data to SmartPTT on a TS in a "first come first serve" basis. Example: You have 2 static TGs on TS1 mapped from BM to SmartPTT. TG1 and TG2. If the TS is quiet, traffic on TS1/TG1 will be sent to SmartPTT. Now while the TS1/TG1 traffic is "flowing" Traffic appears on TS1/TG2, The TS1/TG1 traffic will not be interrupted. Once the traffic on TS1/TG1 drops, BM will IMMEDIATELY send the TS1/TG2 traffic to SmartPTT. Thus "stealing" the TS. The user on TS1/TG1 will not hear traffic on TS1/TG1 until the traffic on TS1/TG2 stops.

Based on the information above, choose the TS/TG you request from any single BM server with care. DMRlink does have rules to control routing TS/TG from BM to DMRlink. If you have to have more then 1 TG on a given TS from BM, You should consider breaking up your requests to multiple BM servers. 





From: Corey Dean N3FE <n3fe@...>
To: <main@dvswitch.groups.io>
Sent: 4/26/2018 9:43 AM
Subject: Re: [DVSwitch] PTT Configuration

If you are using BM as your gateway it is already following the BM defaults.  IF you want to do something more then you need to use a conference bridge to accomplish what you want.

On Thu, Apr 26, 2018 at 9:34 AM, Jamie R. Cid <jay@...> wrote:
Hello All,

I am running dmrlink as follows,
BM <---> HB_Bridge <---> IPSC_Bridge <---> Motorola Repeater.

I have my talk groups statically trunked in and would like to setup a PTT method like on BM within this system. Is that possible? For example someone on my repeater keys up TG310 and it stays active for 5 minutes or whatever then closes again etc...

Ive looked through the wiki but it seems kinda slim ;)

Thanks!



Re: PTT Configuration

Jamie R. Cid <jay@...>
 

Does that replace something or just run it additional to the bridges?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/26/2018 9:42 AM
Subject: Re: [DVSwitch] PTT Configuration

I’d recommend putting confbridge.py between IPSC_Bridge and your Motorola repeater(s) for that.

On Apr 26, 2018, at 8:34 AM, Jamie R. Cid <jay@...> wrote:

Hello All,

I am running dmrlink as follows,
BM <---> HB_Bridge <---> IPSC_Bridge <---> Motorola Repeater.

I have my talk groups statically trunked in and would like to setup a PTT method like on BM within this system. Is that possible? For example someone on my repeater keys up TG310 and it stays active for 5 minutes or whatever then closes again etc...

Ive looked through the wiki but it seems kinda slim ;)

Thanks!

Cort Buffington
785-865-7206


Re: PTT Configuration

Corey Dean N3FE <n3fe@...>
 

If you are using BM as your gateway it is already following the BM defaults.  IF you want to do something more then you need to use a conference bridge to accomplish what you want.

On Thu, Apr 26, 2018 at 9:34 AM, Jamie R. Cid <jay@...> wrote:
Hello All,

I am running dmrlink as follows,
BM <---> HB_Bridge <---> IPSC_Bridge <---> Motorola Repeater.

I have my talk groups statically trunked in and would like to setup a PTT method like on BM within this system. Is that possible? For example someone on my repeater keys up TG310 and it stays active for 5 minutes or whatever then closes again etc...

Ive looked through the wiki but it seems kinda slim ;)

Thanks!



Re: PTT Configuration

Cort N0MJS <n0mjs@...>
 

I’d recommend putting confbridge.py between IPSC_Bridge and your Motorola repeater(s) for that.

On Apr 26, 2018, at 8:34 AM, Jamie R. Cid <jay@...> wrote:

Hello All,

I am running dmrlink as follows,
BM <---> HB_Bridge <---> IPSC_Bridge <---> Motorola Repeater.

I have my talk groups statically trunked in and would like to setup a PTT method like on BM within this system. Is that possible? For example someone on my repeater keys up TG310 and it stays active for 5 minutes or whatever then closes again etc...

Ive looked through the wiki but it seems kinda slim ;)

Thanks!

Cort Buffington
785-865-7206


PTT Configuration

Jamie R. Cid <jay@...>
 

Hello All,

I am running dmrlink as follows,
BM <---> HB_Bridge <---> IPSC_Bridge <---> Motorola Repeater.

I have my talk groups statically trunked in and would like to setup a PTT method like on BM within this system. Is that possible? For example someone on my repeater keys up TG310 and it stays active for 5 minutes or whatever then closes again etc...

Ive looked through the wiki but it seems kinda slim ;)

Thanks!


Re: IPSC to IPSC question?

Corey Dean N3FE <n3fe@...>
 

Everything you should need is either in the configs or the wiki.  PLEASE take a little time and look over everything and it will answer most of your questions.  There are so many emails that I am just deleting them...

Corey n3fe


On Apr 25, 2018, at 6:39 PM, Jamie R. Cid <jay@...> wrote:

Ok, Im getting this now. Tried both ports.. Does the repeater need any special licensing for this?

INFO 2018-04-25 22:38:33,809 (XPR8300) Registering with the Master: 10.1.100.10:55001
INFO 2018-04-25 22:38:38,809 (XPR8300) Registering with the Master: 10.1.100.10:55001



From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/25/2018 6:20 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?

Did you actually read any of the comments in the sample file or just set almost everything to true?


On Apr 25, 2018, at 5:18 PM, Jamie R. Cid <jay@...> wrote:

Hey all,

Here is my config, It wont seem to connect to the master repeater...

[XPR8300]
# XPR8300 Repeater
ENABLED: True
RADIO_ID: 113647
IP:
PORT: 55001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: True
XNL_MASTER: True
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
GROUP_HANGTIME: 5
AUTH_ENABLED: True
AUTH_KEY: 17164787710
MASTER_IP: 10.1.100.10
MASTER_PORT: 55000

And the repeater:

Mode: Master
AuthenticationKey: 17164787710
Master UDP port: 55000
UDP port: 55001




From: Peter M0NWI <peter-martin@...>
To: "main@DVSwitch.groups.io" <main@DVSwitch.groups.io>
Sent: 4/25/2018 5:31 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?


LOL!  I think giving the world an open source IPSC stack is pretty good start Cort!

Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@...>
Sent: 25 April 2018 20:18:47
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] IPSC to IPSC question?
 
Not at this time… which is pretty embarrassing given my day job and my work to try and get the US to pull it’s head out of it’s ass and adopt v6.


On Apr 25, 2018, at 1:10 PM, Jamie R. Cid <jay@...> wrote:

Also do these scripts support IPv6 or no?

Cort Buffington
785-865-7206


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

So is there any way to stop TG1 and TG2 from going out to BM. Every time we key locally it gets sent to BM..


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/25/2018 6:20 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?

Did you actually read any of the comments in the sample file or just set almost everything to true?


On Apr 25, 2018, at 5:18 PM, Jamie R. Cid <jay@...> wrote:

Hey all,

Here is my config, It wont seem to connect to the master repeater...

[XPR8300]
# XPR8300 Repeater
ENABLED: True
RADIO_ID: 113647
IP:
PORT: 55001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: True
XNL_MASTER: True
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
GROUP_HANGTIME: 5
AUTH_ENABLED: True
AUTH_KEY: 17164787710
MASTER_IP: 10.1.100.10
MASTER_PORT: 55000

And the repeater:

Mode: Master
AuthenticationKey: 17164787710
Master UDP port: 55000
UDP port: 55001




From: Peter M0NWI <peter-martin@...>
To: "main@DVSwitch.groups.io" <main@DVSwitch.groups.io>
Sent: 4/25/2018 5:31 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?


LOL!  I think giving the world an open source IPSC stack is pretty good start Cort!

Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@...>
Sent: 25 April 2018 20:18:47
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] IPSC to IPSC question?
 
Not at this time… which is pretty embarrassing given my day job and my work to try and get the US to pull it’s head out of it’s ass and adopt v6.


On Apr 25, 2018, at 1:10 PM, Jamie R. Cid <jay@...> wrote:

Also do these scripts support IPv6 or no?

Cort Buffington
785-865-7206


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

Ok,

were working lol...

Should a PI3B be ok to run this gateway?


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/25/2018 6:20 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?

Did you actually read any of the comments in the sample file or just set almost everything to true?


On Apr 25, 2018, at 5:18 PM, Jamie R. Cid <jay@...> wrote:

Hey all,

Here is my config, It wont seem to connect to the master repeater...

[XPR8300]
# XPR8300 Repeater
ENABLED: True
RADIO_ID: 113647
IP:
PORT: 55001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: True
XNL_MASTER: True
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
GROUP_HANGTIME: 5
AUTH_ENABLED: True
AUTH_KEY: 17164787710
MASTER_IP: 10.1.100.10
MASTER_PORT: 55000

And the repeater:

Mode: Master
AuthenticationKey: 17164787710
Master UDP port: 55000
UDP port: 55001




From: Peter M0NWI <peter-martin@...>
To: "main@DVSwitch.groups.io" <main@DVSwitch.groups.io>
Sent: 4/25/2018 5:31 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?


LOL!  I think giving the world an open source IPSC stack is pretty good start Cort!

Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@...>
Sent: 25 April 2018 20:18:47
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] IPSC to IPSC question?
 
Not at this time… which is pretty embarrassing given my day job and my work to try and get the US to pull it’s head out of it’s ass and adopt v6.


On Apr 25, 2018, at 1:10 PM, Jamie R. Cid <jay@...> wrote:

Also do these scripts support IPv6 or no?

Cort Buffington
785-865-7206


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

Ok had to change timeslots since BM uses linked timeslots... :/


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/25/2018 6:20 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?

Did you actually read any of the comments in the sample file or just set almost everything to true?


On Apr 25, 2018, at 5:18 PM, Jamie R. Cid <jay@...> wrote:

Hey all,

Here is my config, It wont seem to connect to the master repeater...

[XPR8300]
# XPR8300 Repeater
ENABLED: True
RADIO_ID: 113647
IP:
PORT: 55001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: True
XNL_MASTER: True
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
GROUP_HANGTIME: 5
AUTH_ENABLED: True
AUTH_KEY: 17164787710
MASTER_IP: 10.1.100.10
MASTER_PORT: 55000

And the repeater:

Mode: Master
AuthenticationKey: 17164787710
Master UDP port: 55000
UDP port: 55001




From: Peter M0NWI <peter-martin@...>
To: "main@DVSwitch.groups.io" <main@DVSwitch.groups.io>
Sent: 4/25/2018 5:31 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?


LOL!  I think giving the world an open source IPSC stack is pretty good start Cort!

Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@...>
Sent: 25 April 2018 20:18:47
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] IPSC to IPSC question?
 
Not at this time… which is pretty embarrassing given my day job and my work to try and get the US to pull it’s head out of it’s ass and adopt v6.


On Apr 25, 2018, at 1:10 PM, Jamie R. Cid <jay@...> wrote:

Also do these scripts support IPv6 or no?

Cort Buffington
785-865-7206


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

SO talking out to TAC 310 people can hear me fine. Problem is i cannot hear anyone.. Nothing is opening up my radio...


INFO 2018-04-25 23:07:50,844 (XPR8300) Begin AMBE encode STREAM ID: 3627278466 SUB: 3158380 (3158380) REPEATER: 11364701 (11364701) TGID TAC 310 (310), TS 2
INFO 2018-04-25 23:08:13,449 (XPR8300) Begin AMBE encode STREAM ID: 1249751878 SUB: 3158380 (3158380) REPEATER: 11364701 (11364701) TGID TAC 310 (310), TS 2
INFO 2018-04-25 23:08:32,508 (XPR8300) Begin AMBE encode STREAM ID: 3203419250 SUB: KB2EYN (3134368) REPEATER: 11364701 (11364701) TGID TAC 310 (310), TS 2
INFO 2018-04-25 23:08:36,582 Voice Transmission Start on TS 1 and TG TAC 310 (310) from KD2PGY
INFO 2018-04-25 23:08:36,896 (XPR8300) Begin AMBE encode STREAM ID: 649566876 SUB: KD2PGY (3162025) REPEATER: 11364701 (11364701) TGID TAC 310 (310), TS 2
INFO 2018-04-25 23:08:38,193 Voice Transmission End 1.61 seconds loss rate: 3.70% (26/27)

Looks like a timeslot mismatch?



From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/25/2018 6:20 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?

Did you actually read any of the comments in the sample file or just set almost everything to true?


On Apr 25, 2018, at 5:18 PM, Jamie R. Cid <jay@...> wrote:

Hey all,

Here is my config, It wont seem to connect to the master repeater...

[XPR8300]
# XPR8300 Repeater
ENABLED: True
RADIO_ID: 113647
IP:
PORT: 55001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: True
XNL_MASTER: True
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
GROUP_HANGTIME: 5
AUTH_ENABLED: True
AUTH_KEY: 17164787710
MASTER_IP: 10.1.100.10
MASTER_PORT: 55000

And the repeater:

Mode: Master
AuthenticationKey: 17164787710
Master UDP port: 55000
UDP port: 55001




From: Peter M0NWI <peter-martin@...>
To: "main@DVSwitch.groups.io" <main@DVSwitch.groups.io>
Sent: 4/25/2018 5:31 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?


LOL!  I think giving the world an open source IPSC stack is pretty good start Cort!

Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@...>
Sent: 25 April 2018 20:18:47
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] IPSC to IPSC question?
 
Not at this time… which is pretty embarrassing given my day job and my work to try and get the US to pull it’s head out of it’s ass and adopt v6.


On Apr 25, 2018, at 1:10 PM, Jamie R. Cid <jay@...> wrote:

Also do these scripts support IPv6 or no?

Cort Buffington
785-865-7206


Re: IPSC to IPSC question?

Jamie R. Cid <jay@...>
 

Got it.... Yayyy...;)


From: Cort N0MJS <n0mjs@...>
To: <main@DVSwitch.groups.io>
Sent: 4/25/2018 6:20 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?

Did you actually read any of the comments in the sample file or just set almost everything to true?


On Apr 25, 2018, at 5:18 PM, Jamie R. Cid <jay@...> wrote:

Hey all,

Here is my config, It wont seem to connect to the master repeater...

[XPR8300]
# XPR8300 Repeater
ENABLED: True
RADIO_ID: 113647
IP:
PORT: 55001
ALIVE_TIMER: 5
MAX_MISSED: 20
PEER_OPER: True
IPSC_MODE: DIGITAL
TS1_LINK: True
TS2_LINK: True
CSBK_CALL: False
RCM: True
CON_APP: True
XNL_CALL: True
XNL_MASTER: True
DATA_CALL: True
VOICE_CALL: True
MASTER_PEER: True
GROUP_HANGTIME: 5
AUTH_ENABLED: True
AUTH_KEY: 17164787710
MASTER_IP: 10.1.100.10
MASTER_PORT: 55000

And the repeater:

Mode: Master
AuthenticationKey: 17164787710
Master UDP port: 55000
UDP port: 55001




From: Peter M0NWI <peter-martin@...>
To: "main@DVSwitch.groups.io" <main@DVSwitch.groups.io>
Sent: 4/25/2018 5:31 PM
Subject: Re: [DVSwitch] IPSC to IPSC question?


LOL!  I think giving the world an open source IPSC stack is pretty good start Cort!

Sent from Outlook
From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Cort N0MJS <n0mjs@...>
Sent: 25 April 2018 20:18:47
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] IPSC to IPSC question?
 
Not at this time… which is pretty embarrassing given my day job and my work to try and get the US to pull it’s head out of it’s ass and adopt v6.


On Apr 25, 2018, at 1:10 PM, Jamie R. Cid <jay@...> wrote:

Also do these scripts support IPv6 or no?

Cort Buffington
785-865-7206

9021 - 9040 of 10078