Using TeraTerm from a PC.

How are you capturing the logs? what program are you using?

All run at startup otherwise systemctl (start/stop) analog_bridge or mmdvm_bridge

How are you running the programs? How are you starting and stopping programs?

Steve, I don't know how to show the output of these items: ps ax | grep opt netstat -unap | grep 351

Stop AB and MB Show the output of: ps ax | grep opt netstat -unap | grep 351 Steve

Using the bridge to YSF,do u have to change the TG in Analog_Bridge.ini like u do for DMR?

GNU nano 2.7.4 File: MMDVM_Bridge-2020-05-13.log I: 2020-05-13 17:03:55.770 MMDVM_Bridge: I: 2020-05-13 17:03:55.770 Portions Copyright (C) 2018 DVSwitch, INAD. I: 2020-05-13

Stop AB, and MB. delete the MB log in /var/log/mmdvm delete the AB log in /var/log/dvswitch show the output of ps ax | grep opt start ab and mb capture the MB and AB log post

I: 2020-05-13 16:21:21.769 System Fusion Network Parameters I: 2020-05-13 16:21:21.769 Local Address: 127.0.0.1 I: 2020-05-13 16:21:21.769 Local Port: 3200 I: 2020-05-13 16:21:21.769

root@nwr-asl:/var/log# ls alternatives.log btmp dvswitch messages syslog.2.gz wtmp Analog_Bridge.log daemon.log faillog messages.1 syslog.3.gz apt

I: 2020-05-13 16:21:21.992 YSF RF Parameters I: 2020-05-13 16:21:21.992 Low Deviation: no I: 2020-05-13 16:21:21.992 Remote Gateway: no I: 2020-05-13 16:21:21.992 Self Only: no I:

Watch the MMDVM_ Bridge log in /var/log/mmdvm Sent by smoke signal (AT&T)

Thanks again, I changed all of these options. I can connect my normal public node (51505) to the private node (1999), but not seeing a connection to YSFdashboard: russell9.com:1234 Is there a place

All looks good except in MMDVM_Bridge.ini: [System Fusion] Enable=0 <----------------- Enable this [System Fusion Network] Enable=1 LocalAddress=127.0.0.1

Thanks Steve again for helping me. Here's what I was able to capture: Here's analog bridge ini: ; Analog_Bridge configuration file. ; This file should be placed in either /etc or it can be ;

Yes, enable YSF and YSF networking in MMDVM_Bridge and move Analog_Bridge.ini from DMR to YSF. Also, point Analog_Bridge.ini at the proper ports in DVSwitch.ini

Thanks Steve for the information I just confirmed DMR, but need to swap everything to YSF?

Follow this and change MMDVM_Bridge.ini to YSF from DMR. <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit> Steve N4IRS

What's the easiest way to bridge both of these together?