Hi Mike, Thank you very much for the extensive description which is very useful and allows you to better understand how to use it. Yes, I know that we can use a direct connection with MMDM_Bridge with

Hello Waldek, So, this is a BIG topic which covers several ways you may want to use the DVSwitch components. The multiple transmit ports in general will allow you to have a much richer assortment of

Correct, Andy publishes his code on github just like we do. Steve

Hi Steve, I guess my info is incorrect. Last time I experimented with YSF2DMR, I downloaded it from Github: https://github.com/juribeparada/YSF2DMR 73, Geoffrey VE6GCD

Geoff, No, YSF2DMR is a program by Andy CA6JAU. He built it as part of his excellent work on the MMDVM Hotspot code. Steve N4IRS

YSF2DMR code was derived from MMDVM Bridge. So if you already have MMDVM Bridge installed, know how to configure and got it working previously, then there is no need to install YSF2DMR. 73, Geoffrey

Hi Paul, My node ASL 40446 is connected to my own HB Link server. I use HBlink3 and this is how I did it. ASL 40446 <-> USRP 1001 <-> Analog Bridge <-> MMDVM Bridge <-> HBlink3 Please note that HB

Make sure you have the latest MMDVM _Bridge. Get Outlook for Android

See if this helps: <https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md> and from MMDVM_Bridge.ini: DMR Network] Enable=0

I'm also stuck with something similar here. Could anyone with a working connection to an XLX post the relevent parts of their mmdvm bridge.ini file. Owning both a YSF reflector and XLX, I have other

Hi Mike, Can you give an example of how to use it? Do I then run two Analog_Bridge which supports YSFN and the other YSFW with different TX ports but the same RXport with DVswitch.ini?

C4FM didn’t need both - just the reflector, and yes we use Allstar as a hub to allow for more granular control of the modes (it’s easy to disconnect/connect a node) etc... Sent from the iRoad

Super, Thanks. So I do need both the gateway and reflector for each mode. One question, i assume you used a separate psuedo node for each mode. That makes some sense to me. Back when I started

You can do the same thing with just MMDVM_Bridge. No YSF2DMR required.

You may bridge it via YSF2DMR, point the corresponding networks in their respective stanzas and away it goes. No need to have a MMDVM Bridge or Analog Bridge, if this is like you state in your

Here is a thing I finally put up... http://www.we0fun.com/?p=1288 Sent from the iRoad

Thank you. I’ll do some further research. Chris

All the information is available on this group. Search through the messages. I'm not at my computer to give you links. My Asl is 50131which links to XLX922 E. This is the CQ-UK room. You can add

Thank you, Ernie. Can you expand on Ab to Mb? Just getting started with digital setups on my end.

I know that there are those who have done this already. I began this quest 2+ years ago to build a server that could "conference" together AllStar, DMR, YSF, P25, NXDN and D-Star users. I wanted to