Hi My problem is solved, After some time I could not link to the DMR Brandmeister server? We are forced (in the Netherlands) now to set the RX and TX frequency to the same value (simplex). This is

Thanks, Paul. While Linux can be a a pain for incompatibility, I have simply installed the current version of DVswitch (based on Buster, I understand) on the current version of the Raspberry Pi OS

Looks like you are mixing things from different linux distributions or versions. It is not finding "/usr/bin/systemctl" which is probably actually at "/bin/systemctl" It is not finding

......

One question - how many hotspots/DVswitch can one D-STAR user have on a single public IP address? With DMR I can have multiple hotspots, but each have their own ID (e.g. 2354000-01, 2354000-02 and so

David, Doing some testing now. Steve

Yes, that's what I expected, Steve, but when I press Connect with REF001C selected, it speaks "Not linked", even though the status line says: "Connected to REF001C". This with the DVSwitch PC

You should select D-Star as the mode and then REF001C as your reflector.

Yes, I did Steve, but I just ran through it again and - behold - DV3000 now showing as /dev/tyyUSB0 and the "topmost" LED on the DV3000 is flashing. Great! Monit is working as well. Thanks for your

David, Did you use the dvs menu to setup the DVstick30? Steve N4IRS

Many thanks, Ernie. I'm a little out of my depth here! Lack of knowledge on this arrangement. I don't see any LEDs glowing on the DVstick30 at all, but it's not often in transmit mode. Is the

Quickest way to see if its working is to look at the Dvstick. Constant light will appear on Tx. Or start AB in a window and watch the log. There will be a line saying using hardware. Get Outlook for

[Repost - no replies received before, help would be appreciated] I recently installed DVSwitch on a spare Raspberry Pi 3B and it seems to be working perfectly, however: - I installed on an existing

So, something like

Yes, this will work.  I use the startup reflector for the D-STAR link to XLX432 D. -- 73 de Tony VK3JED/VK3IRL http://vkradio.com

Actually, if you want to connect to only one reflector, I think you can set the startup in /etc/ircddbgateway. Maybe someone more versed in D-Star can chime in.

Hi: I've been using DVSwitch for nearly two years, but have never needed to care about DStar until now. I have previously connected my system to XLX via DMR, but now I want to have a second DVSwitch

Thanks, got it.

apt install dvswitch dvswitch-menu

OK, I only need this for a static bridge with ambe hardware anyway, so the dashboard isn't required. It is not installed now anyway, re: previous errors. How can I then install dvswitch-server