Fixed. I must have misunderstood about the DUPLEX=1. Thanks! 73 Scott, N4UPC

Set Duplex = 0

--- [General] Callsign=N4UPC #Id=316235620 Id=3162356 Timeout=180 Duplex=1 [Info] RXFrequency=222340000 TXFrequency=222340000 Power=1

Show MMDVM_Bridge.ini

Also RX/TX freq is the same. 73, Scott N4UPC

<https://dvswitch.groups.io/g/main/message/9018>

All, My DVSwitch system as suddenly stopped connecting to BM. I've made the changes to the MMDVM_Bridge file as previously noted: [General] Callsign=N4UPC #Id=316235620

What are you connecting to? AllStar (IAX) or DVSwitch Server (USRP) Steve N4IRS

Hi de G6LUU Have installed Dv Switch on a second android device Which is a T320 nd I have a problem. It says on Status 'Not registered' . I cannot work out away round this problem , Tried the

Ok, so the only issue I see at this point is with Analog_Bridge. It's not aware of M17 as a digital mode and does not know how to send frames to M17Gateway. I suppose we'll have to wait until

Terrible audio apparently, so I think a reinstall. -- Derek G4WXN

I've figured it out, I had to add the repository manually. I think I may have an old version or install, I used the brute force install, it's probably nearly a year old. Anyway it's working, not sure

Show me the output of apt update

Rpi 3 Raspbian buster -- Derek G4WXN

What hardware and OS version?

I tried apt reinstall md380-emu as super user but get : -------------------------------------------- Reading package lists... Done Building dependency tree Reading state information...

Ernie, thanks again. ran remove and purge seemed to be fine, how do I reinstall md380-emu? I tried the usual apt-get install be get : -------------------------------------------- Reading package

I would: systemctl stop md380-emu rm /lib/systemd/system/md380-emu rm -rf /opt/md380-emu apt reinstall md380-emu This is off the top of my head, so check for typos.

Just md380-emu Get Outlook for Android

The image is Raspbian a raw install, and then used the brute force script to install DVS. -- Derek G4WXN