|
Re: #hblink is throwing out many " DMR Slot 2, overflow in the DMR slot RF queue"
#hblink
I suggest you post this information in the HBlink subgroup <https://dvswitch.groups.io/g/HBlink> Where more HBlink users will see it.
Steve N4IRS
I suggest you post this information in the HBlink subgroup <https://dvswitch.groups.io/g/HBlink> Where more HBlink users will see it.
Steve N4IRS
|
By
Steve N4IRS
·
#8165
·
|
|
Re: #hblink is throwing out many " DMR Slot 2, overflow in the DMR slot RF queue"
#hblink
Hello Bob, thank you for kind replay.
unfortunately Parrot documentation on hblink3 is fragmented , a piece here, a piece there so a bit unconfortable to follow the puzzle
On my radio of course the
Hello Bob, thank you for kind replay.
unfortunately Parrot documentation on hblink3 is fragmented , a piece here, a piece there so a bit unconfortable to follow the puzzle
On my radio of course the
|
By
fabiobassa
·
#8164
·
|
|
Re: #hblink is throwing out many " DMR Slot 2, overflow in the DMR slot RF queue"
#hblink
Dunno if this applies, but on our HBLink server Parrot 9990 has to be a *group* call... (I'm not the person maintaining it so I can't expand on that; I just know that's how it is...)
KK6RQ
Dunno if this applies, but on our HBLink server Parrot 9990 has to be a *group* call... (I'm not the person maintaining it so I can't expand on that; I just know that's how it is...)
KK6RQ
|
By
Bob KK6RQ
·
#8163
·
|
|
Re: DVSwitch running on 2nd Raspberry Pi
Frank,
pyUC is a client program written in Python3. It requires a system with a graphic interface (Linux window manager, Microsoft Windows, Apple MAC. it is not intended to run on the
Frank,
pyUC is a client program written in Python3. It requires a system with a graphic interface (Linux window manager, Microsoft Windows, Apple MAC. it is not intended to run on the
|
By
Steve N4IRS
·
#8162
·
|
|
Re: DVSwitch running on 2nd Raspberry Pi
Frank which directory are you issuing the pyUC.py command from? If the same directory as the one holding pyUC.py script try ./pyUC.py.
Otherwise make sure the path is know.
Larry - N7FM
Frank which directory are you issuing the pyUC.py command from? If the same directory as the one holding pyUC.py script try ./pyUC.py.
Otherwise make sure the path is know.
Larry - N7FM
|
By
larry_n7fm
·
#8161
·
|
|
DVSwitch running on 2nd Raspberry Pi
I set up a Raspberry Pi last week with Hamvoip. The Allstar Node is up and running and RF is connected. It has a private node 1999 also.
I installed DVSwitch on the second Pi (No ALS)
I followed the
I set up a Raspberry Pi last week with Hamvoip. The Allstar Node is up and running and RF is connected. It has a private node 1999 also.
I installed DVSwitch on the second Pi (No ALS)
I followed the
|
By
Frank C. D'Amato
·
#8160
·
|
|
DVSwitch running on 2nd Raspberry Pi
I set up a Raspberry Pi last week with Hamvoip. The Allstar Node is up and running and RF is connected. It has a private node 1999 also.
I installed DVSwitch on the second Pi (No ALS)
I followed the
I set up a Raspberry Pi last week with Hamvoip. The Allstar Node is up and running and RF is connected. It has a private node 1999 also.
I installed DVSwitch on the second Pi (No ALS)
I followed the
|
By
Frank C. D'Amato
·
#8159
·
|
|
macros not saving after restart of app
Hey guys I wanted to add macros in the config section of dvswitch to shut down or restart my allstar node but when i close the app and restart the app
it resets the macros I entered I believe I have
Hey guys I wanted to add macros in the config section of dvswitch to shut down or restart my allstar node but when i close the app and restart the app
it resets the macros I entered I believe I have
|
By
bretteld74@...
·
#8158
·
|
|
#hblink is throwing out many " DMR Slot 2, overflow in the DMR slot RF queue"
#hblink
Hello all,
following many tutorials and hows to, and studying and again studying I succesfully manage to install hblink on a amhf rockchip processor board. It starts and also dashboard is working
Hello all,
following many tutorials and hows to, and studying and again studying I succesfully manage to install hblink on a amhf rockchip processor board. It starts and also dashboard is working
|
By
fabiobassa
·
#8157
·
Edited
|
|
Re: Dvswitch crashes with weak 4G signal.
All well and good, and improving the 4G signal is a good idea where
that's an option, but none of this addresses what looks like a serious
issue that the OP reported - DVSwitch server generating an
All well and good, and improving the 4G signal is a good idea where
that's an option, but none of this addresses what looks like a serious
issue that the OP reported - DVSwitch server generating an
|
By
Tony Langdon
·
#8156
·
|
|
Re: Dvswitch crashes with weak 4G signal.
sounds like the problem is your not getting enough 4g signal to your site. if your using a cellphone for net connection you will have a problem with reliable communication as cell towers get
sounds like the problem is your not getting enough 4g signal to your site. if your using a cellphone for net connection you will have a problem with reliable communication as cell towers get
|
By
Brad N8PC
·
#8155
·
|
|
Re: DVSM APP server pool
Mike,
at the moment the test-pool has tree member under a fixed internet-IP to share DVSM as a small HAM mobile-DVSM-App Service with focus - more people to can test, try and use that excellent mobile
Mike,
at the moment the test-pool has tree member under a fixed internet-IP to share DVSM as a small HAM mobile-DVSM-App Service with focus - more people to can test, try and use that excellent mobile
|
By
Ralf, DC9NYC
·
#8154
·
|
|
Dvswitch crashes with weak 4G signal.
Hello gentlemen of DVswitch.
I have already experienced a few times that when I have too little 4G (Mobile data) signal, DV switch crashes. The PTT key turns red, and then transmits continuously. I
Hello gentlemen of DVswitch.
I have already experienced a few times that when I have too little 4G (Mobile data) signal, DV switch crashes. The PTT key turns red, and then transmits continuously. I
|
By
Pd1loi
·
#8153
·
|
|
Re: Where the heck is hUC?
Another thing to look forward to! I love DVSwitch Mobile on my Android,
but sometimes I only have the iPhone with me. Sold me yet again! :D
--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
Another thing to look forward to! I love DVSwitch Mobile on my Android,
but sometimes I only have the iPhone with me. Sold me yet again! :D
--
73 de Tony VK3JED/VK3IRL
http://vkradio.com
|
By
Tony Langdon
·
#8152
·
|
|
Re: Where the heck is hUC?
Now this sounds awesome. I'm currently using AllStar as my main
bridge. Currently, only traffic from modes with dissimilar vocoders
traverses AllStar (DMR - YSF has its own dedicated
Now this sounds awesome. I'm currently using AllStar as my main
bridge. Currently, only traffic from modes with dissimilar vocoders
traverses AllStar (DMR - YSF has its own dedicated
|
By
Tony Langdon
·
#8151
·
|
|
Re: DVSM APP server pool
Ralf,
The new Analog_Reflector will fill this need. However, tell me more about your pool. Did you write a proxy? Does it have a list of available ports? Does it spawn new AB instances on
Ralf,
The new Analog_Reflector will fill this need. However, tell me more about your pool. Did you write a proxy? Does it have a list of available ports? Does it spawn new AB instances on
|
By
Mike Zingman - N4IRR
·
#8150
·
|
|
Re: Noobie Questions on DVSwitch and App
Brian
The built in vocoder is not good for DStar, you need a USB dongle for DStar.
For the favourites list I use a script to push it to the App.
I have attached the list.
The built in list I believe
Brian
The built in vocoder is not good for DStar, you need a USB dongle for DStar.
For the favourites list I use a script to push it to the App.
I have attached the list.
The built in list I believe
|
By
G4WXN@...
·
#8149
·
|
|
Noobie Questions on DVSwitch and App
Hi All -
I have some confusions and questions regarding DVSwitch and the App.
I have DVSwitch up and running, but there's some things I can't seem to figure out and can't find a doc to explain it to
Hi All -
I have some confusions and questions regarding DVSwitch and the App.
I have DVSwitch up and running, but there's some things I can't seem to figure out and can't find a doc to explain it to
|
By
kk6bdf@...
·
#8148
·
|
|
DVSM APP server pool
Hi Steve,
we have installed a public DVswitch server pool. Is it possible APP or hUC USRB client (feature, time later) switch automaticly to the next server entry if selected fails, not reachable, or
Hi Steve,
we have installed a public DVswitch server pool. Is it possible APP or hUC USRB client (feature, time later) switch automaticly to the next server entry if selected fails, not reachable, or
|
By
Ralf, DC9NYC
·
#8147
·
|
|
Re: Adding P25 to existing YSF and DMR bridge
Gary,
Good to hear all is working. You can point to the .ini files in your systemd unit files. Since you are running 2 instances of MB, you will need to have 2 different DVSwitch.ini files,
Gary,
Good to hear all is working. You can point to the .ini files in your systemd unit files. Since you are running 2 instances of MB, you will need to have 2 different DVSwitch.ini files,
|
By
Steve N4IRS
·
#8146
·
|