Steve, Tx on FCS00379 The log message is on the NXDN MMDVM_Bridge: "M: 2020-12-12 14:37:26.510 DMR Slot 2, received network voice header from WB6DTB to TG 30639" "M: 2020-12-12 14:37:26.510 DMR Slot

I thought network watchdog errors were XLX/AMBED related?

This problem continues to occur randomly. Just had to run the update again. Any help appreciated. -- Derek G4WXN

Hi Steve, I changed txTG from 9 to 27715 and I'm seeing transmissions from P25 showing up on DMR last heard. I'm also seeing when I transmit on DMR it's making it to my P25reflector log. I also

Dave, One question. You reference "Network Watchdog Timeout" Are you seeing those words in the log? You should be seeing this: M: 2020-12-12 14:37:26.510 YSF, received network end of

Dave, We thought this was resolved. I am going to setup a test FCS <-> NXDN bridge. I will report my findings. I expect I'll do it first thing tomorrow morning. Steve

Gary, Below is the [AMBE_AUDIO] stanza of you 2 AB instances. Notice you have the txTG set to 9. This tells AB to send traffic it receives on the the USRP port (from the other AB) to TG9

TG 27715. I’m trying to set things up so 27715 is the YSF, DMR, and P25 reflector/TG number.

What TG on TGIF are you trying to bridge to?

Sorry. The correct file is attached this time.

DVS.ini.txt is a second copy of your MB.

Here's the requested files. Thanks

I posted an issue several months ago concerning getting the error message 'Network Watchdog Timeout' after any FCS transmission using an MMDVM_Bridge between FCS and DMR. Specifically this caused

Post your MB.ini, dvswitch.ini and the 2 AB.ini

I don't see how the DMR ID would confuse the gateway. I'll look at your files in the morning.

Stephen, Would I see an error if the gateway was getting confused over DMRID’s? I posted some of my logs the other night. I’m not seeing anything obvious. I did try using my wife’s DMR ID for

As I said, this is old. To get everything without going to github: cd /tmp wget http://dvswitch.org/buster chmod +x buster ./buster apt-get update -y apt-get install dvswitch-server -y See

This is old, you can use: wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/dvswitch.sh

Under 5. the Entry wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvswitch.sh wont work, 404 :(

Hi Pierre, Yes, I agree the situation is not desirable in the network. The actual issue was that packets were being duplicated; I don’t think it was a loop in this case. Interestingly, I was the