Hi Steve: Thanks. Yeah, I thought it should work the same as any other channel driver, so I changed it to a ridiculously low number (10000), and transmissions over 10 seconds across the bridge still

Patrick, AllStar should treat traffic coming from AB just like any other channel driver. I will try to test when I get a chance. I'm on the road for the next few day, so it will be the weekend before

Hi: I'm trying to find a way to limit transmission time from digital to analog. Lately, I've had users experimenting with Peanut and BlueDV continuously transmitting for long periods of time without

All done! Now is all OK! Thank you for the help!!!

Steve, Last night when I tested the P25Gateway was one of the services I forgot to start. In all of my previous attempts it was running. It is set to startup on 27715 my P25 reflector #. I'm using

What port did you move the dashboard to? RX Monitor uses port 8080. Steve N4IRS

Would changing the port have any repercussions, such as causing the RX Monitor button to malfunction? I have three DVSwitch installations running on three different Linux computers. Two of the three

/etc/lighttpd/lighttpd.conf

Hello Everybody! How i can do to change the default web port (80) of my DVSwitch Server with another port? Where i can find the program file to change this port?

Do you have P25Gateway running? Is the startup set to connect to your p25 Reflector?

Steve, As suggested I stopped all services except my P25Reflector and then started MB2 (P25/DMR instance) in the foreground. I confirmed that it logged into the DMR master server (see attached). I

I think the clue here is when Steve said, "Is it logging into the master". If DMR is logging into Bradmeister as it's master then your repeater id is probably your DMR id + 01. Your P25 Gateway has no

Append !9 to your tune string.

Is there anyone who could explain to me how to use DMR+/Phoenix?I can link to a reflector such as 4440, which should then go out on TG 840, however when I monitor the ipsc phoenixf site I see my

What really changed was the frequency requirement. As soon as I changed it to the repeater frequency pair in HBlink I was able to get in. Thanks guys 73.

I already did that, changed password via Self Care and after changing the connection password I obtained the same result. Pretty sure the updated password is correct (otherwise I get an MSTNAK

Gary, To get the bridge working, forget all the extra stuff to start. Tun off the reflectors, turn off the dashboards. Stop all DVswitch services starting at boot. Start at one end of

A little more background on my setup. I built this bridge using the DVSwitch-Server-RPI image as an experiment. However, I never ran the DVS script to configure for use with DVSM. I installed

Due to issues that have been happening recently, we are going to need to start requiring users to set a hotspot security password to gain access to the US Masters. If you already have a hotspot

Hotspot security is required on all hotspots on US servers in the next few weeks. Hotspot security will NOT work with repeater ID's? Or will it work but it is not required?