We have been talking about hUC (HTTP USRP Client) since about the time we released DVSwitch Server. So, where is it already? hUC in it's early form did not really take that long. Thought it connects

Just an enquiry on a minor issue. I use DVSwitch Mobile on an Android device with no keyboard and a quite small screen. I am unable to enter Talkgroup numbers or commands as the on screen keyboard is

OK I think I have this now. I have created MB ini files for each network, the scripts copy this over the MB ini file and then restarts the MB service. This works fine for BM and TGIF, however I

Steve, I changed the YSF2DMR to a different DRM ID. I will arrange another test and provide feedback.

That's what I expected. Both bridges are logging into TGIF with the same DMR ID (139360) I can see where TGIF might be unhappy. Try 2 different IDs. Steve

Steve, Here's the two INI files.

Gary, I see no port conflicts. Please send the two MMDVM_Bridge.ini files.

Hi Steve, Sorry for the delay. My repeater decided to go belly up this weekend. But its working again. Attached are the two UDP captures with only one bridge running at a time.

Ok, excelent. Thank yor

Sergio, The port number can be changed. edit /lib/systemd/system/webproxy.service See this line: ExecStart=/usr/bin/node /opt/Web_Proxy/proxy.js 8080 2222 edit to taste

Hi Steve and all, Is possible change port 8080? This port is to use for the other machine. Thank you.

Yes, that's correct, because both ircDDBGateway and xlxd are able to listen for incoming traffic on the same protocols.  You need to bind them to separate IPs, or run them on separate servers.  I

You are correct, xlxd doesn't need the AMBE chip or server, unless you actually want to transcode.  I'm running an xlxd reflector without the AMBE transcoder.  I am using primarily two modules. 

As I found, without 127.0.0.1 xlxd is not listening on any UDP ports. I did not think xlxd HAD to be used with a vocoder if all it was to do is be a D-Star reflector. Not high on my list of

If I am not mistaken the 127.0.0.1 is supposed to be ambed.

I believe it is looking for AMBE transcoding. I am no expert though. Just trying to help :) -- Doug Gooden troytrojan@...

So, I was playing around this morning. I'll preface this as I can't even spell xlxd. I find xlxd listens on a number of UDP ports, some of which conflict with ircDDBGateway. This is a systemctl status

Ircddbgateway is installed by the image or by the system builder script. Sent by smoke signal (AT&T)

Complete bridge end to end. From what you told me, if only one bridge is running it works fine (either one) I want you to capture the UDP data for tach bridge running on its own.

root@dvswitch-server:/opt/dmr_utils3# ls dmr_utils3 install.sh LICENSE README.rst setup.py root@dvswitch-server:/opt/dmr_utils3# cd dmr_utils3 root@dvswitch-server:/opt/dmr_utils3/dmr_utils3#