If I knew what is broke and what to fix I would do just that. At this point I'm lost again. I no longer hear audio from the DVS server thru DVS mobile app, even tho I can steer TG's and audio seems to

Before you try to connect to the bridge, fix your HAMVOIP 2 node system.

I already had a second node (1999) in rpt.conf, which I edited to bridge to the DVS server. Still can't get my main node (54464) to connect second node (1999) which should bridge to the other pi

If you mean in the [nodes] stanza yes. That defines the location of the node on the server. You should look into adding a second node to HAMVOIP.

That's what I was thinking, but was not sure. Do I still leave 1999 in node stanza in rpt.conf as 127.0.0.1?

In HAMVOIP you will point to DVSwitch here: [1999] rxchannel = USRP/192.168.0.78:34001:32001 In AB.ini you will point to HAMVOIP here: [USRP] address = 192.168.0.75

K. But I'm still not understanding why I'm using 127.0.0.1. My Hamvoip server is 192.168.0.75 and DVS server is 192.168.0.78, so it seems if they are to talk to one another I should be using those

In HAMVOIP you will point to DVSwitch here: [1999] rxchannel = USRP/127.0.0.1:34001:32001 In AB.ini you will point to HAMVOIP here: [USRP] address = 127.0.0.1

Hamvoip/ASL server and DVS server are on two separate rpi 3b+'s. If I don't change IP addresses somewhere to point them, how do they find one another? Changing those addresses exactly where/which

No, don't change the IP in the nodes section.

I'm using a RIM-Alinco on my ASL node (54464), which is using simple_usb. So I should use the second node in rpt.conf (1999) and change it from dahdi/pseudo to USRP? I assume further down in rpt.conf

Not quite. Analog_Bridge wants to talk to the AllStar node via USRP. If you are running a radioless node, then you can add chan_usrp to your main node. Otherwise, you will want to add a

Everything else was good. Set the BM address and it appears working now as I am listening to a QSO on TG91. Now IF I understand correctly; to bridge to my hamvoip server I set my ASL server IP address

yes. Check the other fields. Callsign DMR ID etc.

So 3103.repeater.net in DMR network address field should work?

/opt/MMDVM_Bridge/MMDVM_Bridge.ini As to static address, the easiest way is to reserve the IP in your router. or see the bottom of /etc/dhcpcd.conf

Edit what address where? I have two issues. One is I can't get the DMR master to update to BM_3103, even after running DVS menu several times. I've verified BM password, etc. Second is I want to set a

Are the other values in MMDVM_Bridge correct? If so, go ahead and edit the address.

Did that several times, but no change

hblink.dvswitch.org is the default. you should run the dvs menu to configure Server.