Okay, thanks, Steve. I have the VODAFONE competition in Spain. I have tried it with several mobile phones and with the latest versions of MMDVM_Bridge and Analog_Bridge. If I am in the same Cedula of

I might suggest that the issue is with your carrier and signal to 'tower channel' To me, it seems obvious that your signal is either misreported by phone/tower and it is narrowing the

We will test but I can tell you both Mike and I use it on 4G/LTE daily. Steve N4IRS

If I force the mobile phone to use the 3G network, you can hear the audio on the DVSwitch all right. But if I use the 4G /LTE network the audio starts to sound good, but after a few seconds it is

It worked because it ALWAYS TX to RX and RX to TX.

I don't know why it worked this time with those port switched but it does!!!! THANK YOU Now to check audio levels. I really appreciate your help Thanks Don

Do, It always, TX to RX RX to TX. If you still get a error from MB, Start AB_P25 ONLY netstat -unap Look for AB, it will show you the ports AB is listening on For TLV it should

I can, but they were and still didn't work. I changed them to see. Will do so now.

Analog_Bridge_P25.ini Change: [AMBE_AUDIO] address = 127.0.0.1 txPort = 34103 ; Transmit TLV frames to partner on this port (or 34103) rxPort =

Thankj you and I hope I'm not wasting anymore of your time. Could it be something on the server if its not the .ini files? WB5EKU

Don, If you want to post your 2 AB.ini files and DVSwitch.ini I'll take one more look. Steve

Well, no jou! It gave me the same error again. Ports are set but still not good. I have reached my miniscule knowledge of Linux. I'm going to step away from it and hope a fresh look will help. I feel

👍 -- Tom VE3NY

Mike and I have discussed it and you may see it at some point in the future. It's on the ever growing stack of "round toits" Steve

In the same way that BM Disconnect announces "Not Connected", is there a way to announce ".sh" functions like shutdown.sh routine? It would be great for mobile operation. tnx ... Tom VE3NY -- Tom

I had entirely too many instances of AB_P25 and AB_DMR running. All shutdown now, I will kill MMDVM_Bridge then start everything fresh. Thank you for spending so much of your valuable time on

So, your port conflict is with one of your AB instances. Your P25 AB should be listening on 34103 and transmitting on 34100.

Looks like its running !

Now run MMDVM_Bridge ./MMDVM_Bridge and capture output.

Killed the Refledtor and Gateway