From Analog_Bridge.ini: ; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC) [AMBE_AUDIO] address = 127.0.0.1 ; IP address of xx_Bridge txPort = 34103 rxPort =

# 10888 Texas 10888 29520.asnode.org 41000

Show me a clean P25Gateway startup

Yes it is there in the downloaded P25Hosts.txt file

show me the entry.

Yes in PrivateHost file

in /var/lib/mmdvm/private_P25Hosts.txt 10888 reflector.ip.address reflector.udp.port restart the gateway

Is 10888 in the host file?

If you see no activity ASL --> AB the something is wrong here: Analog_Bridge.ini DVSwitch.ini [AMBE_AUDIO] [P25] address = 127.0.0.1 <-> Address = 127.0.0.1

The P25Gateway log says: No response from 10888, unlinking. It doesn't seem to be able to connect to the reflector (10888).

OK, I changed the AB ini file. I can see ASL activity on AB log. I see no corresponding changes in mmdvm log. The mmdvm log also states: Remote Gateway: no Is that correct? How do I test beyond AB

Tom, The flow looks like this: AB <-> MB <-> P25Gateway Analog_Bridge.ini DVSwitch.ini [AMBE_AUDIO] [P25] address = 127.0.0.1 <-> Address =

Attached are all 5 ini files.

Show me your DVSwitch.ini

Attached

I need to see both logs from a fresh start to waiting for traffic. Do not truncate.

root@P25reflector:/var/log/dvswitch # tail -f Analog_Bridge.log M: 2020-08-10 21:29:52.793 Connecting to DV3000 hardware...... W: 2020-08-10 21:29:53.800 DV3000 not found at 127.0.0.1:2460 I:

stop Analog_Bridge and MMDVM_Bridge. remove both logs. start Analog_Bridge and MMDVM_Bridge. Post both logs.

Are these ports correct? ASL ( USRP) 32001 RX, 34001 TX AB (USRP) TX 32001, RX 34001 (AMBE AUDIO) 32010 TX , 42020 RX MMDVM (P25 network) Gateway 42020, Local 32010 DVSwitch (P25) TX 34100, RX

stop Analog_Bridge and MMDVM_Bridge. remove both logs. start Analog_Bridge and MMDVM_Bridge. Post both logs.