Steve, I just started with a fresh Raspian image and performed all of the suggested steps: apt-get update apt-get upgrade apt-get install raspberrypi-kernel-headers -y Unfortunately, I'm

2 options I can see at this point. 1: Start with a fresh Stretch apt-get update apt-get upgrade apt-get install raspberrypi-kernel-headers -y Verify you have headers

I guess I could start over with a working ASL image of my own and do all the dvswitch install including P25reflector and analog-bridge. That's a lot of re-do. Tom

You first need to change directory to opt/MMDVM_Bridge

dvswitch update Sent via smoke signal (AT&T)

Where do you set the timing for updating the DMRIds.dat file in DVSwitch or what is the command line to execute it manually? Thank you in advance..

What instructions did you follow?

I want to make a bridge between ASL and P25. I understand that I must use the USRP channel driver and ports 32001, 34001. I believe the flow is

Thanks again Steve, got it all working.  Had to do a bit of trial and error, and Googling to get ircDDBGateway to play ball, but it's all running now.  Any activity on the AllStar side results in

heh which is why I was going crazy, appreciate the help and the dev on this. Makes these digital modes work as they should

As you can see, a YSF to DMR bridge is the absolute simplest possible bridge. Steve N4IRS

Happy to help. Steve N4IRS

Nope that was the problem. Audio both ways working as expected. Thanks!

That is the complete MMDVM_Bridge file? Have you set a static TG in BM selfecare for DMR ID 3168316?

DVSwitch.ini ; Configure the DMR Partner ; Audio format is AMBE 72 bit [DMR] Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) TXPort = 35100 ; Port to

I see no traffic on the Bridge when I key up, I see it on BM dashboard tho and the Hotspot is connected on my Dashboard. Here are the more complete logs 2020-08-07 19:32:16.887 DMR, Opening DMR

Show me your complete MMDVM_Bridge.ini and your complete DVSwitch.ini

root@localhost:/var/log/mmdvm# tail -f MMDVM_Bridge-2020-08-07.log M: 2020-08-07 19:32:16.945 YSF, Opening INI file: DVSwitch.ini M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Address ->

What do the logs say?

No ASL involved in this bridge. It should just be DMR <-> YSF