DVSwitch.ini ; Configure the DMR Partner ; Audio format is AMBE 72 bit [DMR] Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) TXPort = 35100 ; Port to

I see no traffic on the Bridge when I key up, I see it on BM dashboard tho and the Hotspot is connected on my Dashboard. Here are the more complete logs 2020-08-07 19:32:16.887 DMR, Opening DMR

Show me your complete MMDVM_Bridge.ini and your complete DVSwitch.ini

root@localhost:/var/log/mmdvm# tail -f MMDVM_Bridge-2020-08-07.log M: 2020-08-07 19:32:16.945 YSF, Opening INI file: DVSwitch.ini M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Address ->

What do the logs say?

No ASL involved in this bridge. It should just be DMR <-> YSF

While doing this I saw the TX/RX ports were misconfigured, with those changed I still have the issue. Heres it configured correctly now [DMR] Address = 127.0.0.1 ; Address to send AMBE

Perry, Are you trying to bridge YSF to DMR? Are you trying to use your existing YSF <-> ASL bridge as part of the YSF to DMR? One thing I can tell you from your e-mail, forget hoseline. It

So I have a Linode (VPS) that has DV switch installed, I've successfully configured Analog Bridge for ASL and DMR, so I think I have a rudimentary understanding whats going on. I am part owner of a

Yeah, I figured that out, now to get things installed across 2 boxes (system is in the cloud, have to use a local server for the DV Dongle and DummyRepeater).  I downloaded the OpenDV code, so all is

Maybe I was not clear. The files are at <https://github.com/N4IRS/DummyRepeater> This is the modification to dummy repeater to communicate with ASL. Steve N4IRS

Thanks.  Well, the newer methods seem to require a ThumbDV or similar, which I don't have, meaning additional cost, and worse still these days, lengthy mail order delays, with the global postal

Is the port open on the router/firewall? -- Doug Gooden troytrojan@...

Pi-Star has a firewall. It may be blocking the outbound traffic on that port. Google Pi-Star firewall to find out how to modify the firewall. Steve N4IRS

I'm hoping someone can help with this one. We are trying to get 2 P25 reflectors to run on the same machine. The second service has a different name that the 1st, there is a separate .ini file, it has

I am upgrading ALL the apt packages. New features. New DVSwitch-? Sent via smoke signal (AT&T)

Steve, again thanks. I just needed to start my reflector and point to it. It’s all working now. That DMR ID file patch in dvswitch.sh should probably be fixed in the repo install. Thanks

That is what it is supposed to do. It's waiting for traffic from MMDVM_Bridge on a TG to tell it what reflector to connect to. Unless, you want it to startup on a particular reflector.

Thanks Steve. That got me past the error in the DVSwitch.sh. Now, when I run /opt/P25Gateway/P25Gateway P25Gateway.ini , I get: root@P25reflector:/opt/P25Gateway# ./P25Gateway P25Gateway.ini

Tom, As root: cd /opt/MMDVM_Bridge ls -la # do you have a dvswitch.sh? mv dvswitch.sh dvswitch.sh.old wget https://github.com/DVSwitch/MMDVM_Bridge/raw/master/dvswitch.sh