Date   

Re: Bridge

Steve N4IRS
 

If you are keying a radio on a repeater and it does not show up in BM I don't know what to tell ya.

On 12/14/2020 2:08 PM, ibjosh1985@... wrote:
i'm keying the TG on a radio connected to a repeater 311995 is the TG and the  repeater DMR ID i added to the bridge does not show up on Brand Meister


Re: Bridge

Joshua Johnson - KC5JMJ
 

i'm keying the TG on a radio connected to a repeater 311995 is the TG and the  repeater DMR ID i added to the bridge does not show up on Brand Meister


Re: Bridge

Steve N4IRS
 

I assume you mean your are keying a radio connected to a hotspot or repeater on a TG. BrandMeister want a signal from the bridge on the TG ot you can set the TG static on the Brand Meister web page.

On 12/14/2020 2:03 PM, ibjosh1985@... wrote:
now it shows the correct TG but when i key up the TG nothing shows up in the activity  bridge.kc5jmj . com


Re: Bridge

Joshua Johnson - KC5JMJ
 

now it shows the correct TG but when i key up the TG nothing shows up in the activity  bridge.kc5jmj . com


Re: Bridge

Steve N4IRS
 

The dashboard shows the result of the last tune command. You can use:
/opt/MMDVM_Bridge/dvswitch.sh tune 1234

On 12/14/2020 1:59 PM, ibjosh1985@... wrote:
why is it when i look at the dashboard the dmr tx TG still shows 9


Re: Bridge

Joshua Johnson - KC5JMJ
 

why is it when i look at the dashboard the dmr tx TG still shows 9


Re: Bridge

Joshua Johnson - KC5JMJ
 

opps good catch i forgot to enable the D-star networking


Re: Bridge

Steve N4IRS
 

Nothing jumps out at me. I would disable D-Star in MB.ini since you disabled the networking.

On 12/14/2020 1:48 PM, ibjosh1985@... wrote:
files i edited can you tell me if i missed anything


Re: Bridge

Joshua Johnson - KC5JMJ
 

files i edited can you tell me if i missed anything


Re: Bridge

Steve N4IRS
 

The server install script puts the .ini files with the binaries.

On 12/14/2020 1:40 PM, ibjosh1985@... wrote:
root@bridge:/opt# cd /opt/MMDVM_Bridge
root@bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge /etc/MMDVM_Bridge.ini &
[1] 28064
root@bridge:/opt/MMDVM_Bridge# Couldn't open the .ini file - /etc/MMDVM_Bridge.ini
MMDVM_Bridge: cannot read the .ini file
/etc/MMDVM_Bridge.ini &
[2] 28424
[1]   Exit 1                  ./MMDVM_Bridge /etc/MMDVM_Bridge.ini
root@bridge:/opt/MMDVM_Bridge# bash: /etc/MMDVM_Bridge.ini: No such file or directory


Re: Bridge

Joshua Johnson - KC5JMJ
 

root@bridge:/opt# cd /opt/MMDVM_Bridge
root@bridge:/opt/MMDVM_Bridge# ./MMDVM_Bridge /etc/MMDVM_Bridge.ini &
[1] 28064
root@bridge:/opt/MMDVM_Bridge# Couldn't open the .ini file - /etc/MMDVM_Bridge.ini
MMDVM_Bridge: cannot read the .ini file
/etc/MMDVM_Bridge.ini &
[2] 28424
[1]   Exit 1                  ./MMDVM_Bridge /etc/MMDVM_Bridge.ini
root@bridge:/opt/MMDVM_Bridge# bash: /etc/MMDVM_Bridge.ini: No such file or directory


Re: Followup on Network Watchdog timeout message FCS to DMR bridge

Steve N4IRS
 

Dave,
I have uploaded a proposed for your FCS EOT issue. It is located in the testing branch on github at <https://github.com/DVSwitch/MMDVM_Bridge/blob/Testing/raw/MMDVM_Bridge.amd64>
To install:
cd /opt/MMDVM_Bridge
systemctl stop mmdvm_bridge
mv MMDVM_Bridge MMDVM_Bridge.old
wget https://github.com/DVSwitch/MMDVM_Bridge/raw/Testing/bin/MMDVM_Bridge.amd64
mv MMDVM_Bridge.amd64 MMDVM_Bridge
systemctl start mmdvm_bridge

retest and report.
For anyone else that wants to play, I also pushed a update to armhf.

Steve N4IRS

On 12/14/2020 12:12 PM, David Young wrote:
Steve,
Result of -v command:  MMDVM_Bridge version 20201105_V1.6.1 git #0a3bff0
We are running all bridging on cloud server running 'Debian 10 Buster x64' and using the DVSwitch module 'MMDVM_Bridge.amd64'
Didn't consider that HBlink3 might be causing the problem.  We have the HBlink3 configuration set to:  Repeat=true
I will attach with the simple bridge diagram additional config files including the hblink.cfg.  This is the first time I have used HBlink3 so you may see something wrong in my configuration causing this problem.  We are using the same TG number for both TGIF DMR and NXDN.

Thanks for your help,
Dave
--
Dave WB6DTB


Re: Followup on Network Watchdog timeout message FCS to DMR bridge

David Young
 

Steve,
Result of -v command:  MMDVM_Bridge version 20201105_V1.6.1 git #0a3bff0
We are running all bridging on cloud server running 'Debian 10 Buster x64' and using the DVSwitch module 'MMDVM_Bridge.amd64'
Didn't consider that HBlink3 might be causing the problem.  We have the HBlink3 configuration set to:  Repeat=true
I will attach with the simple bridge diagram additional config files including the hblink.cfg.  This is the first time I have used HBlink3 so you may see something wrong in my configuration causing this problem.  We are using the same TG number for both TGIF DMR and NXDN.

Thanks for your help,
Dave
--
Dave WB6DTB


Re: Bridge

Joshua Johnson - KC5JMJ
 

if it was a reference or something i kinda missed it sorry


Re: Bridge

Steve N4IRS
 

Never mind

On 12/14/2020 11:27 AM, ibjosh1985@... wrote:
?


Re: Bridge

Joshua Johnson - KC5JMJ
 

?


Re: Followup on Network Watchdog timeout message FCS to DMR bridge

Steve N4IRS
 

David,
What processor are you running your bridges on? uname -a

On 12/13/2020 11:59 PM, David Young wrote:
Steve,

Not sure about the command you are asking me to execute  /opt/MMDVM_Bridge -v
This results in command not found.  I think you are asking for the version of MMDVM_Bridge which is 1.6.1 for the NXDN bridge.

Attached are 2 log files, one from the NXDN bridge log and the second from the FCS bridge log.  These were copied from the MMDVM_Bridge log showing my transmissions from FCS00479 and resulting log entries seen from the NXDN MMDVM_Bridge.  As seen on the NXDN bridge log after each FCS transmission is received on NXDN at the end of those transmissions the log shows the Network Timeout error and no TX OFF log entry, causing NXDN to stay in receive mode.  The last transmission shown in the NXDN bridge log is from me transmitting from TGIF DMR showing a valid NXDN TX OFF log entry which then allows NXDN to pass new NXDN transmissions back through the bridge to HBlink3 master.

Dave
--
Dave WB6DTB


Re: Bridge

Steve N4IRS
 

If you run it on UDP port 31337, you can be leetx2 or confused for Back Orifice.

On 12/14/2020 10:55 AM, ibjosh1985@... wrote:
sweet 31337 is it then


Re: Bridge

Joshua Johnson - KC5JMJ
 

sweet 31337 is it then


Re: Bridge

Steve N4IRS
 

Correct

On 12/14/2020 10:43 AM, ibjosh1985@... wrote:
yes i want to create my own TG. so basically you are saying to use a number that is not being used in that list.

2001 - 2020 of 9775