Date   

Dashboard Time

ke5rad@...
 

How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD


Re: need help with getting components from repo

Steve N4IRS
 

This would be best asked here <https://dvswitch.groups.io/g/HBlink>

Steve N4IRS

On 11/30/2020 9:59 AM, thlongan via groups.io wrote:
I am new and have been having trouble getting components from the repository. Specifically HBlink3 and dmr_utils3.
I have tried several ways and I can not get the right command. I either get back asking for username and password, command not understood, or repository not found. Right now it keeps trying to connect to hblink.org and fails.
Could someone please show me the correct command to get the components From the repository.   Thank you.


need help with getting components from repo

thlongan@...
 

I am new and have been having trouble getting components from the repository. Specifically HBlink3 and dmr_utils3.
I have tried several ways and I can not get the right command. I either get back asking for username and password, command not understood, or repository not found. Right now it keeps trying to connect to hblink.org and fails.
Could someone please show me the correct command to get the components From the repository.   Thank you.


Re: BransMeister Self care password for a DVSwitch

Levi - YO5VLZ
 

Hello,

launch dvs, got to Tools Menu->Configure ini files -> 2. Edit MMDVM_Bridge.ini
There go to [DMR Network] block and edit Password. Put the clear text apssword you enterered into BM Self-Care

...
[DMR Network]
Enable=1
Address=Some Master server IP address
Port=62031
Jitter=360
Local=62032
Password=Put here your password from Self Care in clear text, if you entered in Self Care MyPassword1234 then you enter exactly that here
....

After that Ctrl+X, agree with saving, in the ini edit menu choose Cacne so that you go back to parent menu and choose 36 Restart DVSwitch Services
There is another way but that will force you to enter all the already entered info and chance for a frustating mistake in higher

73s,
Levi
YO5VLZ


Re: Problem with host file download

Steve N4IRS
 

The issue is resolved.

On 11/29/20 7:39 PM, Steve N4IRS via groups.io wrote:
There is a problem with TGList_BM.txt as part of the host file download. This is effecting both existing as well as new installs.
We are working to resolve the issue.

Steve N4IRS


Problem with host file download

Steve N4IRS
 

There is a problem with TGList_BM.txt as part of the host file download. This is effecting both existing as well as new installs.
We are working to resolve the issue.

Steve N4IRS


Re: Coming to a browser near you

Mike Zingman - N4IRR
 

As a Mac/iOS user (and professional developer) I have tested on iOS (12, 13 and 14) Safari and Mac OS Catalina (Safari and Chrome)
In addition, Windows Edge, Linux Chromium, Android Chrome and Silk.  Still to test is Firefox.  I will probably not test on Opera (as I don't care)

iOS as always is a challenge because Apple makes everything harder.  You will need TLS certs (a script is included).

I would not say this is a perfect replacement for a mobile app (it is specifically NOT responsive), but it does perform well on iOS and Mac OS.


Re: Security password on Brandmeister

Ted Lawrence
 

Yes, that fixed it.  Thanks!


Re: Security password on Brandmeister

Steve N4IRS
 

Yes

On 11/29/20 6:14 PM, Ted Lawrence via groups.io wrote:
To be clear.  You replace "passw0rd" with the Self care password ?


Re: Security password on Brandmeister

Ted Lawrence
 

To be clear.  You replace "passw0rd" with the Self care password ?


BransMeister Self care password for a DVSwitch

Ted Lawrence
 

Hi folks!  I need help with DVSwitch edit. With the recent BrandMeister server security change, it broke our DVSwitch to DMR configuration.  What Stanza  do you insert the Self care BrandMeister  password for DVSwitch. Also, what is proper format needed in the line of code?

Thanks for you help!
Ted
KD4EG


Re: Coming to a browser near you

Jay
 

Amen,  I am Mac OS and IOS, with a WinDoze box around to program radios with.  It will be nice to have a web client I can run on everything.

--
jb   N4NQY


Re: level differences between YSF and DMR (again)

k7wby@...
 

You might try changing to AUDIO_USE_GAIN. My ASL side is set to .25 but yours may be different. This is one of those things that you just have to test and test until you get it right. There are also gain settings in rpt.conf that you can play with for ASL.

All my AB instances have DV3000 hardware as well as the XLX so it tends to make it a little easier to balance the audio.


level differences between YSF and DMR (again)

Patrick Perdue
 

Hi:

I'm sure this has been brought up before.

I have a system using DVSwitch, which involves an XLX reflector. Currently, the XLX module to which DVSwitch is connected is also configured as an autolinked YSF reflector. HBlink connects to that reflector, and MMDVM_Bridge connects to HBlink, with my XLX reflector as one peer and TGIF as another.

The YSF reflector on XLX is rarely used compared to DStar and especially DMR, which is the most popular digital mode on the system, but I am told that audio level is significantly higher for audio received by YSF connected clients than DMR, regardless of if the source is ASL or some other mode. I'm already running the gain from ASL to digital below unity (0.38, I think) to avoid distortion. This seems to work well for DMR even with hot analog audio. So, my question is, other than perhaps moving YSF traffic to another module on the reflector, then using an instance of Analog_Bridge to route everything destined for YSF through ASL and turning the gain down on that stage, then pointing YSF outbound traffic back to the original MMDVM_Bridge instead of a second ASL private node to avoid transcoding, since there seems to be no problem in that direction, is there anything I can do about this? I assume probably not, but I honestly haven't paid too much attention to YSF implementation of DVSwitch, since I'm not actually using it to provide YSF connectivity at the moment.


locked Notice to all DVSwitch users. #brandmeister

Steve N4IRS
 

This was posted a few days ago by N3FE
 
Due to issues that have been happening recently, we are going to need to start requiring users to set a hotspot security password to gain access to the US Masters.  If you already have a hotspot security password set on the BM portal, you can ignore this post. We are going to start requiring this on master 3101 November 30th,  3102 will follow on December 4th, and 3103 on December 11th.  This is already implemented on the RU masters, and other Master servers will follow. At this time this will just be for hotspots.  The API is being worked on to allow repeater owners to make this change as well, but it is not quite ready to go.
Here is a link to a post on how to set your hotspot security on the bm portal. Please configure a personalized security password for your hotspots !
 
What does this mean for DVSwitch users? If you have a bridge or server connecting to BrandMeister, you will need to have set your HS password. Up till now, a user could use the default password and connect to BM. With the above change, you will need to set your own password. This is one password per CallSign/DMRID. If you have 2 DMR IDs you will need to set 2 passwords.
 
We HIGHLY suggest you set your HS passwords now. That way when the changes are applied across BM, you will not loose connectivity.


Re: Adding P25 to existing YSF and DMR bridge

Steve N4IRS
 

Gary,
Think of it this way. What modes do you need? MB can do each of the modes, once.
You have a YSF <-> DMR
You want to do P25 <-> DMR

A P25 to DMR Bridge is one instance of MB and 2 instances of AB (the transcoder)

In you YSF <-> DMR bridge, you cross connected the TLV ports. In you P25 <-> DMR bridge that cross connect needs to go through a transcoder.
Think if it as 2 networks. P25 <-> AB and DMR <-> AB This is a single instance of MB and 2 instances of AB. Now, connect the 2 AB together at the USRP ports.
You have a transcoder.

On 11/28/20 6:43 AM, Gary, KE8O wrote:
OK, I think I have my head wrapped around the AB side but I'm not sure on the number of MB instances.  Below is how I currently have my /opt folder setup.

According to Steve's response and the port flow I need two AB instances for the DMR<--> P25 and one MB instance. Is that one MB instance my existing YSF/DMR instance or in addition ? 




Re: Adding P25 to existing YSF and DMR bridge

Gary, KE8O
 

OK, I think I have my head wrapped around the AB side but I'm not sure on the number of MB instances.  Below is how I currently have my /opt folder setup.

According to Steve's response and the port flow I need two AB instances for the DMR<--> P25 and one MB instance. Is that one MB instance my existing YSF/DMR instance or in addition ? 



Re: Nextion screen install #mmdvm_bridge

Steve N4IRS
 

On 11/28/20 5:16 AM, Glenn VK4NGA via groups.io wrote:
Hi all,
I'm new to the group. I did search this but didn't find all the information.
I've installed a Nextion screen to my DVswitch server, an RPi 3B+ and have the hardware side of things correct.
I'm new to Linux and I just need guidance, more so a "how to" install the Nextion driver and any other detail.

Cheers
Glenn Vk4nga


Nextion screen install #mmdvm_bridge

Glenn VK4NGA
 

Hi all,
I'm new to the group. I did search this but didn't find all the information.
I've installed a Nextion screen to my DVswitch server, an RPi 3B+ and have the hardware side of things correct.
I'm new to Linux and I just need guidance, more so a "how to" install the Nextion driver and any other detail.

Cheers
Glenn Vk4nga


Re: Security password on Brandmeister

Steve - WB8GRS
 

Thanks Patrick, works great!

Steve_WB8GRS

2021 - 2040 of 9579