Date   

Re: Coming to a browser near you

@AndrewVK2HAC
 

Mike,
thanks for the detailed update. Look forward to using it when released.


Re: Coming to a browser near you

Mike Zingman - N4IRR
 

Status Report:
I now have a manageable list of items to finish for an alpha release.  The items are divided into Server, and Client with most of the work done for both.  Client needs some "configuration" support, and the server needs some more edge case development.  The last few days have been all client side, but today was a lot more server side.

For an overview the client is a little different than Mobile and pyUC in that it does not communicate with AB directly.  This was initially because the HTML client uses websockets and rather than add that as in interface to AB, a server was created.  The server is implemented in Nodejs and was an outgrowth of the work for the dashboard RX Monitor.  Now the server has grown in several ways which I will document as I get closer to release.

As far as features, hUC is starting out as a peer to pyUC in UI and capabilities.  It will evolve over time.

Finally, the server, HTML and config files will need to be packaged and system services will be set up.


Re: ASL <-> D-Star <-> xlxd

va3dxv
 

Yeah I thought I'd be clever and change the ircddbgateway ports (./Common/DStarDefines.h) and recompile but that just confused it, now seems to try to make the outgoing connections on those ports.


Re: ASL <-> D-Star <-> xlxd

 

I don't think so, because they are D-STAR protocol ports, which are
fixed (DPlus, DExtra, etc). 

xlxd:
udp        0      0 103.4.234.160:8880     
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:10001    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:10002    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:30001    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:30051    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:10100    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:42000    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:20001    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:12345    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:12346    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:40000    
0.0.0.0:*                           4607/xlxd
udp        0      0 103.4.234.160:62030    
0.0.0.0:*                           4607/xlxd

ircDDBgateway
udp        0      0 127.0.0.1:20001        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 127.0.0.1:20002        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 127.0.0.1:20003        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 127.0.0.1:20004        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 127.0.0.1:20005        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 127.0.0.1:20006        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 127.0.0.1:20007        
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 10.43.21.136:20010     
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:40000          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30001          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30002          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30003          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30004          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30005          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30006          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30007          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30051          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30052          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30053          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30054          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30055          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30056          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30057          
0.0.0.0:*                           3484/ircddbgatewayd
udp        0      0 0.0.0.0:30062          
0.0.0.0:*                           3484/ircddbgatewayd

On 1/12/20 11:44 am, Steve N4IRS wrote:
Should be able to move one of the ports.

On 11/30/20 7:42 PM, Tony Langdon wrote:
On 1/12/20 8:53 am, Steve N4IRS wrote:
It would be:
  ASL <-> Analog_Bridge <-> (DStar, using hardware USB chip) <->
MMDVM_Bridge <-> ircDDBGateway <-> xlxd

I don't know if ircDDBGateway and XLX can exist on the same machine. I
assume it can.
 From memory, they both listen on the same ports.  I had to move
ircDDBGateway off the host I was running xlxd on in my setup.




--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: ASL <-> D-Star <-> xlxd

Steve N4IRS
 

Should be able to move one of the ports.

On 11/30/20 7:42 PM, Tony Langdon wrote:
On 1/12/20 8:53 am, Steve N4IRS wrote:
It would be:
 ASL <-> Analog_Bridge <-> (DStar, using hardware USB chip) <->
MMDVM_Bridge <-> ircDDBGateway <-> xlxd

I don't know if ircDDBGateway and XLX can exist on the same machine. I
assume it can.
From memory, they both listen on the same ports.  I had to move
ircDDBGateway off the host I was running xlxd on in my setup.


Re: ASL <-> D-Star <-> xlxd

 

On 1/12/20 8:53 am, Steve N4IRS wrote:
It would be:
 ASL <-> Analog_Bridge <-> (DStar, using hardware USB chip) <->
MMDVM_Bridge <-> ircDDBGateway <-> xlxd

I don't know if ircDDBGateway and XLX can exist on the same machine. I
assume it can.
From memory, they both listen on the same ports.  I had to move
ircDDBGateway off the host I was running xlxd on in my setup.

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: Coming to a browser near you

Steve N4IRS
 

It's moving along. Should be some time this year.

On 11/30/20 6:58 PM, newsletters@... wrote:
Mike,
when do you estimate a Beta product?

Thanks


Re: Coming to a browser near you

@AndrewVK2HAC
 

Mike,
when do you estimate a Beta product?

Thanks


Re: ASL <-> D-Star <-> xlxd

Steve N4IRS
 

It would be:
 ASL <-> Analog_Bridge <-> (DStar, using hardware USB chip) <-> MMDVM_Bridge <-> ircDDBGateway <-> xlxd

I don't know if ircDDBGateway and XLX can exist on the same machine. I assume it can.

Steve N4IRS

On 11/30/20 4:20 PM, va3dxv wrote:
Hello everyone. Is there much D-Star activity in the group? I've got a working xlxd reflector set up I use for a DStar group. Running on the same server, I have a working AllStar simplex radio node with Analog_Bridge and MMDVM_Bridge.

I'd like to bridge the ASL node into xlxd, in D-Star mode. So in theory, it goes like this: ASL <-> Analog_Bridge <-> (DStar, using hardware USB chip) <-> MMDVM_Bridge <-> xlxd

However I can only get MMDVM_Bridge to connect to xlxd if I use [DMR Network] in MMDVM_Bridge.ini. If I try using [D-Star Network], xlxd sees DPlus packets but it doesn't retransmit anything, and doesn't show the connection. Audio is messed up in DMR mode anyways, even though A_B says on start up it's using the hardware codec.

I could maybe insert ircDDBGateway between M_B and xlxd but it doesn't look like they can easily coexist on the same host.

Can MMDVM_Bridge connect to xlxd in DPlus or another DStar mode? I don't want to have to go analog->dmr->dstar, I'd rather just do analog->dstar. Wondering if anyone on here is doing this and how they went about it. Thank You


Re: Dashboard Time

David Aitcheson KB3EFS <kb3efs.dave@...>
 

Steve N4IRS,

Could the "America" one be referencing South America and the "US" one is referencing North America?

73
Dave
KB3EFS



On 11/30/20 3:33 PM, Steve N4IRS wrote:
I can't tell you the difference between the 2. I use US and the time zone. It works. Why? Some day I'll Google it. No duh. ;)

On 11/30/2020 3:31 PM, Chuck wrote:

Thanks, Steve, that did it.  Needed to select US vs America.  Duhhh!

 

73,

Chuck

KE5RAD

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve N4IRS
Sent: Monday, November 30, 2020 1:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Dashboard Time

 

[Edited Message Follows]

Try setting to US / Central in raspi-config

On 11/30/2020 1:36 PM, Chuck wrote:

Where?

Chuck

On November 30, 2020 12:33:13 PM CST, Mike KB8JNM <groupio@...> wrote:

Daylight savings flag ?

On 11/30/2020 1:27 PM, ke5rad@... wrote:

How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD




ASL <-> D-Star <-> xlxd

va3dxv
 

Hello everyone. Is there much D-Star activity in the group? I've got a working xlxd reflector set up I use for a DStar group. Running on the same server, I have a working AllStar simplex radio node with Analog_Bridge and MMDVM_Bridge.

I'd like to bridge the ASL node into xlxd, in D-Star mode. So in theory, it goes like this: ASL <-> Analog_Bridge <-> (DStar, using hardware USB chip) <-> MMDVM_Bridge <-> xlxd

However I can only get MMDVM_Bridge to connect to xlxd if I use [DMR Network] in MMDVM_Bridge.ini. If I try using [D-Star Network], xlxd sees DPlus packets but it doesn't retransmit anything, and doesn't show the connection. Audio is messed up in DMR mode anyways, even though A_B says on start up it's using the hardware codec.

I could maybe insert ircDDBGateway between M_B and xlxd but it doesn't look like they can easily coexist on the same host.

Can MMDVM_Bridge connect to xlxd in DPlus or another DStar mode? I don't want to have to go analog->dmr->dstar, I'd rather just do analog->dstar. Wondering if anyone on here is doing this and how they went about it. Thank You


Re: Dashboard Time

Steve N4IRS
 

I can't tell you the difference between the 2. I use US and the time zone. It works. Why? Some day I'll Google it. No duh. ;)

On 11/30/2020 3:31 PM, Chuck wrote:

Thanks, Steve, that did it.  Needed to select US vs America.  Duhhh!

 

73,

Chuck

KE5RAD

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve N4IRS
Sent: Monday, November 30, 2020 1:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Dashboard Time

 

[Edited Message Follows]

Try setting to US / Central in raspi-config

On 11/30/2020 1:36 PM, Chuck wrote:

Where?

Chuck

On November 30, 2020 12:33:13 PM CST, Mike KB8JNM <groupio@...> wrote:

Daylight savings flag ?

On 11/30/2020 1:27 PM, ke5rad@... wrote:

How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD



Re: Dashboard Time

Chuck <chuck@...>
 

Thanks, Steve, that did it.  Needed to select US vs America.  Duhhh!

 

73,

Chuck

KE5RAD

 

From: main@DVSwitch.groups.io [mailto:main@DVSwitch.groups.io] On Behalf Of Steve N4IRS
Sent: Monday, November 30, 2020 1:19 PM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Dashboard Time

 

[Edited Message Follows]

Try setting to US / Central in raspi-config

On 11/30/2020 1:36 PM, Chuck wrote:

Where?

Chuck

On November 30, 2020 12:33:13 PM CST, Mike KB8JNM <groupio@...> wrote:

Daylight savings flag ?

On 11/30/2020 1:27 PM, ke5rad@... wrote:

How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD


Re: Dashboard Time

Steve N4IRS
 
Edited

Try setting to US / Central in raspi-config


On 11/30/2020 1:36 PM, Chuck wrote:
Where?

Chuck

On November 30, 2020 12:33:13 PM CST, Mike KB8JNM <groupio@...> wrote:

Daylight savings flag ?

On 11/30/2020 1:27 PM, ke5rad@... wrote:
How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD


Re: Dashboard Time

Chuck <chuck@...>
 

Where?

Chuck


On November 30, 2020 12:33:13 PM CST, Mike KB8JNM <groupio@...> wrote:

Daylight savings flag ?

On 11/30/2020 1:27 PM, ke5rad@... wrote:
How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD


Re: Dashboard Time

Mike KB8JNM
 

Daylight savings flag ?

On 11/30/2020 1:27 PM, ke5rad@... wrote:
How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD


Dashboard Time

ke5rad@...
 

How can I adjust the time on the DVSwitch Dashboard running on my Raspberry Pi?  Mine is an hour fast.  I looked at the .ini files and saw nothing related to time zone and I  set America Chicago in raspi-config but no joy.  Suggestions??
--
73,
Chuck
KE5RAD


Re: need help with getting components from repo

Steve N4IRS
 

This would be best asked here <https://dvswitch.groups.io/g/HBlink>

Steve N4IRS

On 11/30/2020 9:59 AM, thlongan via groups.io wrote:
I am new and have been having trouble getting components from the repository. Specifically HBlink3 and dmr_utils3.
I have tried several ways and I can not get the right command. I either get back asking for username and password, command not understood, or repository not found. Right now it keeps trying to connect to hblink.org and fails.
Could someone please show me the correct command to get the components From the repository.   Thank you.


need help with getting components from repo

thlongan@...
 

I am new and have been having trouble getting components from the repository. Specifically HBlink3 and dmr_utils3.
I have tried several ways and I can not get the right command. I either get back asking for username and password, command not understood, or repository not found. Right now it keeps trying to connect to hblink.org and fails.
Could someone please show me the correct command to get the components From the repository.   Thank you.


Re: BransMeister Self care password for a DVSwitch

Levi - YO5VLZ
 

Hello,

launch dvs, got to Tools Menu->Configure ini files -> 2. Edit MMDVM_Bridge.ini
There go to [DMR Network] block and edit Password. Put the clear text apssword you enterered into BM Self-Care

...
[DMR Network]
Enable=1
Address=Some Master server IP address
Port=62031
Jitter=360
Local=62032
Password=Put here your password from Self Care in clear text, if you entered in Self Care MyPassword1234 then you enter exactly that here
....

After that Ctrl+X, agree with saving, in the ini edit menu choose Cacne so that you go back to parent menu and choose 36 Restart DVSwitch Services
There is another way but that will force you to enter all the already entered info and chance for a frustating mistake in higher

73s,
Levi
YO5VLZ

2021 - 2040 of 9595