Date   

Re: ASL to P25 bridge #analog_bridge

Steve N4IRS
 

2 options I can see at this point.
1: Start with a fresh Stretch
    apt-get update
    apt-get upgrade
    apt-get install raspberrypi-kernel-headers -y
Verify you have headers matching the running kernel.
If so, install ASL.

2: Start with ASL 1.01

Steve

On 8/9/20 9:59 PM, Tom wrote:
Iroot@P25reflector:~ # apt-get install raspberrypi-kernel-headers -y
Reading package lists... Done
Building dependency tree        
Reading state information... Done
The following NEW packages will be installed:
  raspberrypi-kernel-headers
0 upgraded, 1 newly installed, 0 to remove and 86 not upgraded.
Need to get 0 B/16.7 MB of archives.
After this operation, 109 MB of additional disk space will be used.
Selecting previously unselected package raspberrypi-kernel-headers.
(Reading database ... 51098 files and directories currently installed.)
Preparing to unpack .../raspberrypi-kernel-headers_1.20190819~stretch-1_armhf.deb ...
Unpacking raspberrypi-kernel-headers (1.20190819~stretch-1) ...
Setting up raspberrypi-kernel-headers (1.20190819~stretch-1) ...
run-parts: executing /etc/kernel/header_postinst.d/dkms 4.19.66+
Error! Bad return status for module build on kernel: 4.19.66+ (armv7l)
Consult /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log for more information.
run-parts: executing /etc/kernel/header_postinst.d/dkms 4.19.66-v7+
Error! Bad return status for module build on kernel: 4.19.66-v7+ (armv7l)
Consult /var/lib/dkms/asl-dahdi-linux/2.11.1/build/make.log for more information.
run-parts: executing /etc/kernel/header_postinst.d/dkms 4.19.66-v7l+
Error! echo
Your kernel headers for kernel 4.19.66-v7l+ cannot be found at
/lib/modules/4.19.66-v7l+/build or /lib/modules/4.19.66-v7l+/source.

root@P25reflector:~ # uname -r
4.14.98-v7+


Re: ASL to P25 bridge #analog_bridge

Tom
 

I guess I could start over with a working ASL image of my own and do all the dvswitch install including P25reflector and analog-bridge. That's a lot of re-do.
Tom


Re: MMDVM_Bridge.ini #mmdvm_bridge

Charles Wiant
 

You first need to change directory to opt/MMDVM_Bridge

 

From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> On Behalf Of john.sutton45 via groups.io
Sent: Sunday, August 09, 2020 9:10 AM
To: main@DVSwitch.groups.io
Subject: [DVSwitch] MMDVM_Bridge.ini #mmdvm_bridge

 

I have followed the instructions for DVSwitch on Pi 3b+ and when and when I get to nano MMDVM_Bridge.ini the file is empty, also there is no program-name file.
I am completely stuck and any help would be much appreciated.  


Re: DMRIds.dat not updating

Steve N4IRS
 

dvswitch update

Sent via smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of n3mel.epa@... <n3mel.epa@...>
Sent: Sunday, August 9, 2020 1:30:27 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] DMRIds.dat not updating
 
Where do you set the timing for updating the DMRIds.dat file in DVSwitch or what is the command line to execute it manually?

Thank you in advance.. 


DMRIds.dat not updating

N3MEL
 

Where do you set the timing for updating the DMRIds.dat file in DVSwitch or what is the command line to execute it manually?

Thank you in advance.. 


Re: MMDVM_Bridge.ini #mmdvm_bridge

Steve N4IRS
 

What instructions did you follow?

On 8/9/20 10:09 AM, john.sutton45 via groups.io wrote:
I have followed the instructions for DVSwitch on Pi 3b+ and when and when I get to nano MMDVM_Bridge.ini the file is empty, also there is no program-name file.
I am completely stuck and any help would be much appreciated.  


ASL to P25 bridge #analog_bridge

Tom
 

I want to make a bridge between ASL and P25. I understand that I must use the USRP channel driver and ports 32001, 34001.
I believe the flow is ASL<->analog_bridge<->MMDVM<->P25gateway<->P25reflector.
I have several questions:
1) Can I do this without a DV3000?
2) What ports are used between modules? 
AMBE_audio to MMDVM 32010, 42020 ?
MMDVM to P25gateway 34103,34100  ?
3) The analog_bridge.ini files that I have seen on the web appear to have DMR stuff like ToDMR port, FromDRM port,slot , color. When I install analog bridge will I see that or P25 settings?
Thanks,
Tom / K5TRA
 


Re: AllStar and DummyRepeater

 

On 7/8/20 7:42 pm, Steve N4IRS wrote:
Maybe I was not clear. The files are at
<https://github.com/N4IRS/DummyRepeater>
This is the modification to dummy repeater to communicate with ASL.

Thanks again Steve, got it all working.  Had to do a bit of trial and
error, and Googling to get ircDDBGateway to play ball, but it's all
running now.  Any activity on the AllStar side results in DummyRepeater
going into transmit.  Waiting on my MMDVM board to access the system
from the D-STAR side, and give my old IC-91AD a run. :)

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

heh which is why I was going crazy, appreciate the help and the dev on this. Makes these digital modes work as they should


Re: DMR to YSFn Bridge #mmdvm_bridge

Steve N4IRS
 

As you can see, a YSF to DMR bridge is the absolute simplest possible bridge.

Steve N4IRS

On 8/7/2020 3:48 PM, Perry Buch wrote:
Nope that was the problem. Audio both ways working as expected. Thanks! 


Re: DMR to YSFn Bridge #mmdvm_bridge

Steve N4IRS
 

Happy to help.

Steve N4IRS

On 8/7/2020 3:48 PM, Perry Buch wrote:
Nope that was the problem. Audio both ways working as expected. Thanks! 


Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

Nope that was the problem. Audio both ways working as expected. Thanks! 


Re: DMR to YSFn Bridge #mmdvm_bridge

Steve N4IRS
 

That is the complete MMDVM_Bridge file?
Have you set a static TG in BM selfecare for DMR ID 3168316?

On 8/7/2020 3:40 PM, Perry Buch wrote:
DVSwitch.ini

; Configure the DMR Partner

; Audio format is AMBE 72 bit

[DMR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35100                  ; Port to send AMBE TLV frames to (export)

RXPort = 35103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35103                  ; Port to send AMBE TLV frames to (export)

RXPort = 35100                  ; Port to listen on (import)

FallbackID = 3168316            ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 3168316                 ; Which TG to export

Slot = 2                        ; Export slot



MMDVM ini

[General]

Callsign=KC2QJA

Id=3168316

Timeout=180

Duplex=0

[DMR]

Enable=1

ColorCode=1

EmbeddedLCOnly=1

DumpTAData=0



[DMR Network]

Enable=1

Address=3102.repeater.net

Port=62031

Jitter=360

Local=62032

Password=passw0rd

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=0

 

[System Fusion Network]

Enable=1

LocalAddress=0

LocalPort=3200

GatewayAddress=repeaters.as.utexas.edu

GatewayPort=42000

Debug=0





Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

DVSwitch.ini

; Configure the DMR Partner

; Audio format is AMBE 72 bit

[DMR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35100                  ; Port to send AMBE TLV frames to (export)

RXPort = 35103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35103                  ; Port to send AMBE TLV frames to (export)

RXPort = 35100                  ; Port to listen on (import)

FallbackID = 3168316            ; In case we can not find a valid DMR id in the database, export this one

ExportTG = 3168316                 ; Which TG to export

Slot = 2                        ; Export slot



MMDVM ini

[General]

Callsign=KC2QJA

Id=3168316

Timeout=180

Duplex=0

[DMR]

Enable=1

ColorCode=1

EmbeddedLCOnly=1

DumpTAData=0



[DMR Network]

Enable=1

Address=3102.repeater.net

Port=62031

Jitter=360

Local=62032

Password=passw0rd

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md

# for XLX the syntax is: Options=XLX:4009

# Options=

Slot1=0

Slot2=1

Debug=0

 

[System Fusion Network]

Enable=1

LocalAddress=0

LocalPort=3200

GatewayAddress=repeaters.as.utexas.edu

GatewayPort=42000

Debug=0




Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

I see no traffic on the Bridge when I key up, I see it on BM dashboard tho and the Hotspot is connected on my Dashboard. 

Here are the more complete logs 


 2020-08-07 19:32:16.887 DMR, Opening DMR Network

I: 2020-08-07 19:32:16.887 System Fusion Network Parameters

I: 2020-08-07 19:32:16.887     Local Address: 0

I: 2020-08-07 19:32:16.887     Local Port: 3200

I: 2020-08-07 19:32:16.887     Gateway Address: repeaters.as.utexas.edu

I: 2020-08-07 19:32:16.887     Gateway Port: 42000

I: 2020-08-07 19:32:16.887     Mode Hang: 3s

M: 2020-08-07 19:32:16.945 Opening YSF network connection

I: 2020-08-07 19:32:16.945 RSSI

I: 2020-08-07 19:32:16.945     Mapping File: RSSI.dat

W: 2020-08-07 19:32:16.945 Cannot open the RSSI data file - RSSI.dat

I: 2020-08-07 19:32:16.945 DMR Id Lookups

I: 2020-08-07 19:32:16.945     File: /var/lib/mmdvm/DMRIds.dat

I: 2020-08-07 19:32:16.945     Reload: 24 hours

W: 2020-08-07 19:32:16.945 Cannot open the DMR Id lookup file - /var/lib/mmdvm/DMRIds.dat

I: 2020-08-07 19:32:16.945 DMR RF Parameters

I: 2020-08-07 19:32:16.945     Id: 3168316

I: 2020-08-07 19:32:16.945     Color Code: 1

I: 2020-08-07 19:32:16.945     Self Only: no

I: 2020-08-07 19:32:16.945     Embedded LC Only: yes

I: 2020-08-07 19:32:16.945     Dump Talker Alias Data: no

I: 2020-08-07 19:32:16.945     Prefixes: 0

I: 2020-08-07 19:32:16.945     Call Hang: 3s

I: 2020-08-07 19:32:16.945     TX Hang: 3s

I: 2020-08-07 19:32:16.945     Mode Hang: 10s

M: 2020-08-07 19:32:16.945 DMR, Opening INI file: DVSwitch.ini

M: 2020-08-07 19:32:16.945 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-08-07 19:32:16.945 DMR, Setting [DMR] TXPort -> 35100

M: 2020-08-07 19:32:16.945 DMR, Setting [DMR] RXPort -> 35103

M: 2020-08-07 19:32:16.945 DMR, Setting [DMR] Slot -> 2

M: 2020-08-07 19:32:16.945 DMR, Transmitting on 127.0.0.1:35100 and listening on port 35103.  Result = 1

I: 2020-08-07 19:32:16.945 YSF RF Parameters

I: 2020-08-07 19:32:16.945     Low Deviation: no

I: 2020-08-07 19:32:16.945     Remote Gateway: no

I: 2020-08-07 19:32:16.945     Self Only: no

I: 2020-08-07 19:32:16.945     DSQ: no

I: 2020-08-07 19:32:16.945     Mode Hang: 10s

M: 2020-08-07 19:32:16.945 YSF, Opening INI file: DVSwitch.ini

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Address -> 127.0.0.1

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] TXPort -> 35103

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] RXPort -> 35100

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] FallbackID -> 3168316

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] ExportTG -> 3168316

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Slot -> 2

M: 2020-08-07 19:32:16.945 YSF, Transmitting on 127.0.0.1:35103 and listening on port 35100.  Result = 1

M: 2020-08-07 19:32:16.945 MMDVM_Bridge-20191105_V1.4.1 is running

I: 2020-08-07 19:32:16.945 Started the DMR Id lookup reload thread

M: 2020-08-07 19:32:26.970 DMR, Logged into the master successfully

 


Re: DMR to YSFn Bridge #mmdvm_bridge

Steve N4IRS
 

Show me your complete MMDVM_Bridge.ini and your complete DVSwitch.ini

On 8/7/2020 3:34 PM, Perry Buch wrote:

root@localhost:/var/log/mmdvm# tail -f MMDVM_Bridge-2020-08-07.log

M: 2020-08-07 19:32:16.945 YSF, Opening INI file: DVSwitch.ini

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Address -> 127.0.0.1

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] TXPort -> 35103

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] RXPort -> 35100

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] FallbackID -> 3168316

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] ExportTG -> 3168316

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Slot -> 2

M: 2020-08-07 19:32:16.945 YSF, Transmitting on 127.0.0.1:35103 and listening on port 35100.  Result = 1

M: 2020-08-07 19:32:16.945 MMDVM_Bridge-20191105_V1.4.1 is running

I: 2020-08-07 19:32:16.945 Started the DMR Id lookup reload thread

M: 2020-08-07 19:32:26.970 DMR, Logged into the master successfully



Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

root@localhost:/var/log/mmdvm# tail -f MMDVM_Bridge-2020-08-07.log

M: 2020-08-07 19:32:16.945 YSF, Opening INI file: DVSwitch.ini

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Address -> 127.0.0.1

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] TXPort -> 35103

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] RXPort -> 35100

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] FallbackID -> 3168316

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] ExportTG -> 3168316

M: 2020-08-07 19:32:16.945 YSF, Setting [YSF] Slot -> 2

M: 2020-08-07 19:32:16.945 YSF, Transmitting on 127.0.0.1:35103 and listening on port 35100.  Result = 1

M: 2020-08-07 19:32:16.945 MMDVM_Bridge-20191105_V1.4.1 is running

I: 2020-08-07 19:32:16.945 Started the DMR Id lookup reload thread

M: 2020-08-07 19:32:26.970 DMR, Logged into the master successfully


Re: DMR to YSFn Bridge #mmdvm_bridge

Steve N4IRS
 

What do the logs say?

On 8/7/2020 3:24 PM, Perry Buch wrote:
No ASL involved in this bridge. 

It should just be DMR <-> YSF


Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

No ASL involved in this bridge. 

It should just be DMR <-> YSF


Re: DMR to YSFn Bridge #mmdvm_bridge

Perry Buch
 

While doing this I saw the TX/RX ports were misconfigured, with those changed I still have the issue. Heres it configured correctly now

[DMR]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35100                  ; Port to send AMBE TLV frames to (export)

RXPort = 35103                  ; Port to listen on (import)

Slot = 2                        ; Export slot

 

 

; Configure the Yaesu Fusion Partner

; Audio format is AMBE 72 bit

; Audio format is IMBE 88 bit

[YSF]

Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)

TXPort = 35103                  ; Port to send AMBE TLV frames to (export)

RXPort = 35100                  ; Port to listen on (import)

FallbackID =            ; In case we can not find a valid DMR id in the database, export this one

ExportTG =                 ; Which TG to export

Slot = 2                        ; Export slot

2301 - 2320 of 9205