Date   

Re: DVSwitch-System-Builder 404 error

Derek William Haden <facebook@...>
 

Error 404 occurs when I try to run the script ./DVSwitch-System-Builder.sh

Here's the reported error
---
./DVSwitch-System-Builder.sh
--2020-09-25 16:49:44--  http://dvswitch.org/install-dvswitch-repo
Resolving dvswitch.org (dvswitch.org)... 44.103.34.4
Connecting to dvswitch.org (dvswitch.org)|44.103.34.4|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-09-25 16:49:44 ERROR 404: Not Found.
------
If I try to run
wget http://dvswitch.org/install-dvswitch-repo   ### first line of the script
I get the error


Re: DVSwitch-System-Builder 404 error

Steve N4IRS
 



On 9/25/2020 10:13 AM, Derek William Haden wrote:root@dvswitch:
/# mkdir test
root@dvswitch:/# cd test

root@dvswitch:/test# wget https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip
--2020-09-25 10:05:39--  https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip
Resolving github.com (github.com)... 140.82.112.4
Connecting to github.com (github.com)|140.82.112.4|:443... connected.
HTTP request sent, awaiting response... 302 Found
Location: https://codeload.github.com/DVSwitch/DVSwitch-System-Builder/zip/master [following]
--2020-09-25 10:05:40--  https://codeload.github.com/DVSwitch/DVSwitch-System-Builder/zip/master
Resolving codeload.github.com (codeload.github.com)... 140.82.114.9
Connecting to codeload.github.com (codeload.github.com)|140.82.114.9|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: unspecified [application/zip]
Saving to: ‘master.zip’

master.zip                                             [   <=>                                                                                                             ]   1.70M  2.89MB/s   in 0.6s

2020-09-25 10:05:40 (2.89 MB/s) - ‘master.zip’ saved [1781536]

root@dvswitch:/test# ls -la
total 1748
drwxr-xr-x  2 root root    4096 Sep 25 10:05 .
drwxr-xr-x 24 root root    4096 Sep 25 10:05 ..
-rw-r--r--  1 root root 1781536 Sep 25 10:05 master.zip

[Edited Message Follows]

Followed instructions
cd /tmp
wget 
https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip
cd /srv
unzip /tmp/master.zip
mv DVSwitch-System-Builder-master DVSwitch-System-Builder
cd DVSwitch-System-Builder
./DVSwitch-System-Builder.sh

404 error not found.
???



DVSwitch-System-Builder 404 error

Derek William Haden <facebook@...>
 
Edited

Followed instructions
cd /tmp
wget 
https://github.com/DVSwitch/DVSwitch-System-Builder/archive/master.zip
cd /srv
unzip /tmp/master.zip
mv DVSwitch-System-Builder-master DVSwitch-System-Builder
cd DVSwitch-System-Builder
./DVSwitch-System-Builder.sh

404 error not found.
???


Re: Talkover my talk groups

Derek William Haden <facebook@...>
 

Do you have port forwarding setup on the router?


Re: How do i connect my bridge on the TGIF network

Steve N4IRS
 

Edit this stanza in MMDVM_Bridge.ini

[DMR Network]
Address=hblink.dvswitch.org
Port=62031
Password=passw0rd


On 9/22/20 3:54 PM, Jeremy WX8NWS 3169368 wrote:
How do i connect my bridge on the TGIF network


How do i connect my bridge on the TGIF network

 

How do i connect my bridge on the TGIF network


Re: Anysecu / Inrico B01 BT Microphone

Jose - EA5SW
 

Sri. I post in the another group.


Re: Anysecu / Inrico B01 BT Microphone

Tito Lopez - YN1OB
 

Wrong group


On Sat, Sep 19, 2020, 1:41 PM Jose - EA5SW <ea5sw.ampr.org@...> wrote:
Hello , I have now an Anysecu B01 Bluetooth Microphone, it's a great Bluetooth mic that work very well with Zello app.
The normal BT mode connected to any mobile phone make a great Rx sound and modulation.
You need to route the audio via BT mono app, but sound good.

The buttons for PTT, SOS and select channel + and - are defined into the serial service. When you press any of the buttons the value are send via serial and received into the smartphone.

It's possible implement those serial service into dvswitch mobile to make those buttons operative?

 I think that many of these Chinese BT mics works in this way and are very good for hams.

If anyone of developers need more information or videos, please contact.




Anysecu / Inrico B01 BT Microphone

Jose - EA5SW
 

Hello , I have now an Anysecu B01 Bluetooth Microphone, it's a great Bluetooth mic that work very well with Zello app.
The normal BT mode connected to any mobile phone make a great Rx sound and modulation.
You need to route the audio via BT mono app, but sound good.

The buttons for PTT, SOS and select channel + and - are defined into the serial service. When you press any of the buttons the value are send via serial and received into the smartphone.

It's possible implement those serial service into dvswitch mobile to make those buttons operative?

 I think that many of these Chinese BT mics works in this way and are very good for hams.

If anyone of developers need more information or videos, please contact.




Re: YSF on mmdvm switch mobile, help setup, please

IZ4BKK <iz4bkk@...>
 

Hi Ernie
the modified sw is available for mmdvswitch mobile project?
Thanks


USRPaudio Transmitting TG / RID

Kim-Benjamin Lütkemeier
 

Hello Guys,

Its possible to change the RID or TG into the USRPaudio.py?

I make a modification that I can transmit some Wav files. It work but I will transmit File one in TG9 and file Two in TG8
Maybe I can overwrite it from Analogbridge? Also it will be nice when I can Change the RID that I can see on the Radio I will transmit from Wavefile.

Normal Analogbride transmit from 2623266 (DO1KBL) but when I transmit from Wav I will Change ID to 26232661

73
Do1KBL, Kim


USRP

Aaron Groover
 

Hey guys seem to be having a strange issue when transmitting. Just curious to what everyone has there usrp setting at. Apparently I’m having like a clicking over modulation on my side. 

Mine is currently: pic below 

Image.jpegImage.jpeg




Thank You,
Aaron Groover
K3ALG@...
(610) 379-6148


Re: YSF on mmdvm switch mobile, help setup, please

 

Wires-x gateway to wires-x gateway does not work.
Wires-x to mmdvm does not work.
Wires-x with modified mmdvm software works.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Brad N8PC <bradn8pc@...>
Sent: Friday, September 18, 2020 1:16:18 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] YSF on mmdvm switch mobile, help setup, please
 
Yaesu repeaters use wires-x. it is not the same as what is used for MMDVM for FCS and YSF chat rooms

On 9/18/2020 4:37 AM, IZ4BKK wrote:
Hi guys,
I have made a YSF setup on my rasperry's mmdvm switch mobile, and it's run fine BUT there is an issue :
When I select the "Room Italy" (my country) or another ysf room, I can trasmit only to rf MMDVM based repeaters , and not to original yaesu rf repeaters.
Someone can review my ysf setup please? Any suggestion please?
Thanks in advance and sorry for my english.

73 de iz4bkk Andrea


Re: YSF on mmdvm switch mobile, help setup, please

Brad N8PC
 

Yaesu repeaters use wires-x. it is not the same as what is used for MMDVM for FCS and YSF chat rooms

On 9/18/2020 4:37 AM, IZ4BKK wrote:
Hi guys,
I have made a YSF setup on my rasperry's mmdvm switch mobile, and it's run fine BUT there is an issue :
When I select the "Room Italy" (my country) or another ysf room, I can trasmit only to rf MMDVM based repeaters , and not to original yaesu rf repeaters.
Someone can review my ysf setup please? Any suggestion please?
Thanks in advance and sorry for my english.

73 de iz4bkk Andrea


YSF on mmdvm switch mobile, help setup, please

IZ4BKK <iz4bkk@...>
 

Hi guys,
I have made a YSF setup on my rasperry's mmdvm switch mobile, and it's run fine BUT there is an issue :
When I select the "Room Italy" (my country) or another ysf room, I can trasmit only to rf MMDVM based repeaters , and not to original yaesu rf repeaters.
Someone can review my ysf setup please? Any suggestion please?
Thanks in advance and sorry for my english.

73 de iz4bkk Andrea


#mmdvm_bridge #mmdvm_bridge

 

why is there echoing from my node ?


Re: md380-emu

Pete Fierro
 

It's an MD380 radio emulator..Make sure to have the setting to "True" from "False."It enhances the audio in most situations.

Pete
KD2ARB


On Wed, Sep 16, 2020 at 18:48, Karl Koscher
<supersat@...> wrote:
I believe it is used to emulate the MD380 firmware for its AMBE codec, avoiding the need to have a dedicated chip/USB dongle for that. It's only needed when going between systems that use the AMBE codec and those that don't (e.g., analog). 


Talkover my talk groups

Pete Fierro
 

  Hi Guys

   I'm running two pi's on DV switch on DMR on two different TG's.In MMDVM.INI I have my DMR ID along with two different numbers appended at the end of my ID.(05,06)on both pi's

   I'm getting crossover every time someone is on a hotspot for some reason.If I'm  on one pi,sometimes I can hear a qso on the other pi.Is there a fix for this?IAX.CONF in allstar,the IAX port is different as well.I even went so far as to change the private node ID in RPT.CONF to read different numbers to no avail.

  On the brandmeister site I have my DMR ID's there as well as the two digits appended there too.Whats going on?

Thanks
Pete
KD2ARB


Re: md380-emu

Karl Koscher
 

I believe it is used to emulate the MD380 firmware for its AMBE codec, avoiding the need to have a dedicated chip/USB dongle for that. It's only needed when going between systems that use the AMBE codec and those that don't (e.g., analog). 


md380-emu

Aaron Groover
 

Hey guys I been running only just the bridge and MMDVM. However never really played with the 380. What exactly is it for? Multiple connects and such?



--

 

Thank You,

 

Aaron Groover

(610) 379 6148

K3ALG@...

aaron@...

agroover@...

 

 

 

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.


**This message has been composed on a mobile application. Please excuse any grammatical errors**

2301 - 2320 of 9519