Date   

Re: DVSwitch-System-Builder throws up error

Steve N4IRS
 

Yes,
You can skip it.

On 8/24/2020 2:04 PM, Derek William Haden wrote:

With what little knowledge I have I think the problem is in
/usr/local/sbin/cleanup.sh

but I don't know why?



Re: DVSwitch-System-Builder throws up error

Derek William Haden <facebook@...>
 

With what little knowledge I have I think the problem is in
/usr/local/sbin/cleanup.sh

but I don't know why?


Re: DVSwitch-System-Builder throws up error

Derek William Haden <facebook@...>
 

Got this error message 

rm: cannot remove '/usr/local/sbin/DMRIDUpdateBM.sh': No such file or directory

Is this a problem? or do I just go ahead and now configure the ini files?


Re: PTT button solution

F1JMJ Joël
 

On Mon, Aug 24, 2020 at 12:00 AM, Derek William Haden wrote:
I was going to suggest a selfie stick button, not sure if that is the same or different to what you are using?
I am using a selfie button (bluetooth 4)


Re: DVSwitch-System-Builder throws up error

Derek William Haden <facebook@...>
 

OK.

Thanks for the help.

Derek

Wonderful lark this Radio.  Friends ALL over the World!

 

None here,  but Friends ALL over the World!


Re: DStar on DV Switch Mobile

Tom Corcoran
 

 I would look at setting up ambeserver and analog_bridge locally on a pi and then point the ip address and ports from your VPS to the local analog_bridge setup.“

Got that working. Hoped to get working with DVSwitch cloud server. Think I will move on to other projects. 


tnx for input to all. 


--
Tom VE3NY


Re: DStar on DV Switch Mobile

Jeff Lehman, N8ACL
 

YEah I have heard a lot of people say the same thing with amber server. 

I would look at setting up ambeserver and analog_bridge locally on a pi and then point the ip address and ports from your VPS to the local analog_bridge setup. That would be more reliable. I think (and I have not done this personally so someone please correct me) that you can setup something like DDNS or duckDNS locally if you have a dynamic IP on your home setup and use the url to point the IP address to your local setup. 

Jeff

Jeff Lehman, N8ACL
E-mail: N8ACL@...
Hamshack Hotline: 4218
Website: https://n8acl.ddns.net



On Aug 24, 2020, at 8:44 AM, Patrick Perdue <patrick@...> wrote:

Not in the context of DVSM, but I ran a remote AMBEserver for Analog_Bridge for a while, ran into some problems and eventually scrapped it for md380emu, since I didn't care about DStar. My DStar bridge is strictly done with XLX and a pair of AMBE dongles, and I don't need outbound connectivity to DStar reflectors in my setup.

At the time, my AMBEserver running on a Pi was a good solid 2 to 3 ms ping from the VPS running DVSwitch. The datacenter was practically in my backyard. While it did work reliably sometimes, it would randomly drop, or have huge gaps between audio packets, so I eventually just gave it up as a bad job. Running Analog_Bridge and AMBEserver locally, or using the dongle directly connected to Analog_Bridge through /dev/ttyUSB0 worked fine, but I always had various problems using AMBEserver remotely with Analog_Bridge, at least when connecting back to Allstar. The network path was about as good as I could hope for, considering it was a remote connection to AMBEserver.


On 8/24/2020 8:33 AM, Tom Corcoran wrote:
Has anyone been able to get a remote AMBEserver working with DVSwitch running on a cloud server? I have an AMBEserver sitting on a RPi at my home and DVSwitch running on a cloud server. Made appropriate (?) changes to AB.ini but can’t seem to make the combination work. Advice?

--
Tx Tom VE3NY


Re: DStar on DV Switch Mobile

Patrick Perdue
 

Not in the context of DVSM, but I ran a remote AMBEserver for Analog_Bridge for a while, ran into some problems and eventually scrapped it for md380emu, since I didn't care about DStar. My DStar bridge is strictly done with XLX and a pair of AMBE dongles, and I don't need outbound connectivity to DStar reflectors in my setup.

At the time, my AMBEserver running on a Pi was a good solid 2 to 3 ms ping from the VPS running DVSwitch. The datacenter was practically in my backyard. While it did work reliably sometimes, it would randomly drop, or have huge gaps between audio packets, so I eventually just gave it up as a bad job. Running Analog_Bridge and AMBEserver locally, or using the dongle directly connected to Analog_Bridge through /dev/ttyUSB0 worked fine, but I always had various problems using AMBEserver remotely with Analog_Bridge, at least when connecting back to Allstar. The network path was about as good as I could hope for, considering it was a remote connection to AMBEserver.


On 8/24/2020 8:33 AM, Tom Corcoran wrote:
Has anyone been able to get a remote AMBEserver working with DVSwitch running on a cloud server? I have an AMBEserver sitting on a RPi at my home and DVSwitch running on a cloud server. Made appropriate (?) changes to AB.ini but can’t seem to make the combination work. Advice?

--
Tx Tom VE3NY


Re: DStar on DV Switch Mobile

Tom Corcoran
 

Has anyone been able to get a remote AMBEserver working with DVSwitch running on a cloud server? I have an AMBEserver sitting on a RPi at my home and DVSwitch running on a cloud server. Made appropriate (?) changes to AB.ini but can’t seem to make the combination work. Advice?

--
Tx Tom VE3NY


Re: DVSwitch-System-Builder throws up error

Steve N4IRS
 

You can try to run the script again but I think you will get errors. I would burn a fresh SD card.

On 8/24/2020 7:57 AM, Derek William Haden wrote:
When you say from Scratch, you mean the OS too?


Re: DVSwitch-System-Builder throws up error

Derek William Haden <facebook@...>
 

When you say from Scratch, you mean the OS too?


Re: DVSwitch-System-Builder throws up error

Steve N4IRS
 

Derek,
It should be fixed now. You will have to start over from scratch. Sorry
I can tell you that the System-Builder is getting a rewrite in the not to distant future.

Steve N4IRS

On 8/24/20 7:03 AM, Derek William Haden wrote:
DVSwitch-System-Builder throws up error

"parse error: Invalid numeric literal at line 1, column 10
Error, DMR ID file does not seem to be valid"
 
The script then stops, or as come to a natural end, I don't know.

Can anyone help?


DVSwitch-System-Builder throws up error

Derek William Haden <facebook@...>
 

DVSwitch-System-Builder throws up error

"parse error: Invalid numeric literal at line 1, column 10
Error, DMR ID file does not seem to be valid"
 
The script then stops, or as come to a natural end, I don't know.

Can anyone help?


Re: PTT button solution

Derek William Haden <facebook@...>
 

I was going to suggest a selfie stick button, not sure if that is the same or different to what you are using?


PTT button solution

F1JMJ Joël
 

Hello,

The DVSWITCH app is great. But there is the problem in the car with the PTT. In many countries, touching the phone while driving is punishable by law. Currently I use a bluetooth button for the PTT which is intended to take a picture with the telephone (code 24), but after a few uses the phone goes into alarm mode and I have to restart the phone. Is there a viable solution to this problem or a real alternative for PTT with a classic mobile phone with a Zello-like PTT button that works well with DVSWITCH ? Thank you for your answers.

73 F1JMJ


Re: Ports

Steve N4IRS
 

The settings for MMDVM_Bridge are defined in DVSwitch.ini. UDP

On 8/23/20 2:45 PM, Aaron Groover wrote:
Hey guys. Happy Sunday! So i had to rebuild my system after some *cough* user error. Which I then found out what i was doing wrong. However i can not seem to find the settings for DMR 31100 31103. is it TCP or UDP? Thank you!

--

 

Thank You,

 

Aaron Groover

(610) 379 6148

K3ALG@...

aaron@...

agroover@...


www.papsar.org 

 

EPAMC_logo

 

 

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.




Ports

Aaron Groover
 

Hey guys. Happy Sunday! So i had to rebuild my system after some *cough* user error. Which I then found out what i was doing wrong. However i can not seem to find the settings for DMR 31100 31103. is it TCP or UDP? Thank you!

--

 

Thank You,

 

Aaron Groover

(610) 379 6148

K3ALG@...

aaron@...

agroover@...


www.papsar.org 

 

EPAMC_logo

 

 

The content of this email is confidential and intended for the recipient specified in message only. It is strictly forbidden to share any part of this message with any third party, without a written consent of the sender. If you received this message by mistake, please reply to this message and follow with its deletion, so that we can ensure such a mistake does not occur in the future.



Re: Where are the Host files stored?

Steve N4IRS
 

Yes,
Over time we standardized file name locations etc. The .ini files tell you were to find the host files and data files.

On 8/23/20 2:44 PM, David wrote:
Steve,

My bridges have been working fine for a year or more.  I have no "/var/lib/mmdvm" directory.

I'm guessing you've updated the kit and files are now in different places?

David


Re: Where are the Host files stored?

David - AK2L
 

Steve,

My bridges have been working fine for a year or more.  I have no "/var/lib/mmdvm" directory.

I'm guessing you've updated the kit and files are now in different places?

David


Re: DStar on DV Switch Mobile

Derek William Haden <facebook@...>
 

I would recommend using the Ambe server with the DV dongle.

I could not get the DVSwitch to connect to the dongle via USB.

2501 - 2520 of 9579