Date   

P25Reflector install help...

Bob KK6RQ
 

Hi,

I'm having some difficulty while installing the whole package (G4-somebody/dvswitch) using the 927.org instructions (which is riddled with typos);
I've read everything I've been able to google, both here and elsewhere, but I'm stuck on a concept or two:

What (and WHERE or WHO) determines what your newly installed P25 reflector's TG ID is?

I probably will choose not to publish the TG (at first, at least) but where do I give it its name? I saw a thread where Steve says some ppl are using the same #
as their chosen DMR TG (which already exists; I'm trying to link them)?

Thanks,

Bob
KK6RQ


Re: radioid.net URL update in dvswitch.sh

Steve N4IRS
 

Yes, I am building all new apt packages and ....

On 7/25/20 7:33 PM, Mike, AA9VI via groups.io wrote:
cd /opt/Analog_Bridge
rm dvswitch.sh
wget https://raw.githubusercontent.com/DVSwitch/MMDVM_Bridge/master/dvswitch.sh
./dvswitch.sh update

works.

So, the debian installer just needs an update.
Mike, AA9VI


Re: radioid.net URL update in dvswitch.sh

Mike, AA9VI
 

cd /opt/Analog_Bridge
rm dvswitch.sh
wget https://raw.githubusercontent.com/DVSwitch/MMDVM_Bridge/master/dvswitch.sh
./dvswitch.sh update

works.

So, the debian installer just needs an update.
Mike, AA9VI


a guide i put together for installing VDVLINK (VirtualBox)

Orrin Winton
 

Hopefully this is the right group to post this to.

Based on the EA5GVK/EA7JCL info, including their pages on how to install the .vdi
file into VirtualBox, plus very helpful material written by Dave WA3LXD, i made an
installation guide.


It doesn't claim to be the last word, but it's how i got going with VDVLINK and DV-Switch.
The Virtual DV-Link runs for days no problem. I have it running on both the Win10 and the
Ubuntu versions of VirtualBox. ... My only complaint is that so far i have not been able to
get D-Star running. But DMR-YSF-P25-NXDN run fine. I only use it for DMR 3100 anyway.

It was fun putting it together, as i read Spanish very well and it was enjoyable doing a little
translating. The screenshots from the EA5GVK/EA7JCL VirtualBox setup are for v8 of
VDVLINK, but they are applicable to 9.7.0 and later.

Comments are welcome, but please only if you try my "guide" and run into problems, and
please not on this list.    orrin.winton at gmail.com

73 de WN1Z
Orrin


Re: radioid.net URL update in dvswitch.sh

Steve N4IRS
 

I suggest you replace dvswitch.sh with the link I posted.

On 7/25/20 7:30 PM, Mike, AA9VI via groups.io wrote:
root@allstar:/opt/Analog_Bridge# ./dvswitch.sh update
./dvswitch.sh: line 701: jq: command not found
./dvswitch.sh: line 702: jq: command not found
Error, DMR ID file does not seem to be valid


Ideas?


Re: radioid.net URL update in dvswitch.sh

Mike, AA9VI
 

root@allstar:/opt/Analog_Bridge# ./dvswitch.sh update
./dvswitch.sh: line 701: jq: command not found
./dvswitch.sh: line 702: jq: command not found
Error, DMR ID file does not seem to be valid


Ideas?


Re: radioid.net URL update in dvswitch.sh

Mike, AA9VI
 

Thanks!


Re: radioid.net URL update in dvswitch.sh

Steve N4IRS
 

/var/lib/dvswitch/subscriber_ids.csv

/var/lib/mmdvm/DMRIds.dat

dvswitch.sh is in /opt/Analog_Bridge

/opt/Analog_bridge/dvswitch update will update all the host and ID files.

Current version of dvswitch.sh is at <https://github.com/DVSwitch/MMDVM_Bridge/raw/master/dvswitch.sh>

Note: With the next release, dvswitch.sh will be moving to /opt/MMDVM_Bridge

Steve N4IRS



On 7/25/20 4:53 PM, Mike, AA9VI via groups.io wrote:
I just found this and I need an ID update.  How do I manually update the  subscriber_ids.csv ID list?  Where is dvswitch.sh?  I tried to invoke the command but it does not know where it is.  Can someone send the full path?

Also, if you go into MMDVM_Bridge.ini it looks for 
/var/log/mmdvm/DMRIds.dat

So, that's different than this .csv file mentioned above.  All I want is an updated Id lookup file.  What is the proper procedure for updating that, and where does it ultimately reside?

Thanks,
Mike, AA9VI


Re: radioid.net URL update in dvswitch.sh

Mike, AA9VI
 

I just found this and I need an ID update.  How do I manually update the  subscriber_ids.csv ID list?  Where is dvswitch.sh?  I tried to invoke the command but it does not know where it is.  Can someone send the full path?

Also, if you go into MMDVM_Bridge.ini it looks for 
/var/log/mmdvm/DMRIds.dat

So, that's different than this .csv file mentioned above.  All I want is an updated Id lookup file.  What is the proper procedure for updating that, and where does it ultimately reside?

Thanks,
Mike, AA9VI


Re: #brandmeister How can I link YSFReflector to BM talkgroup? #brandmeister

Eric-K6KWB
 

You just need one instances of MMDVM_Bridge. Point DMR to Branmeister and point YSF to your reflector. 

https://dvswitch.groups.io/g/main/wiki/6097


Re: #dmrlink Assistance Getting DMRLink Working #dmrlink

Michael Karp
 

I fat fingered the firmware version in my original post, its on 2.8.5


#brandmeister How can I link YSFReflector to BM talkgroup? #brandmeister

@BH4ERY
 

Hi, everyone,

I have successfully set up a YSFReflector on Ubuntu 16.04 Server.
 
Now, I want to link this YSFReflector to BM talkgroup, How can I link it to BM talkgroup?

Do you have any good suggestions for me?

Thank you!

73!

BH4ERY


Re: DMR_node_list.txt Syntax?

Steve N4IRS
 

Tom,
Yes, if you want a private call in your node list, include a #. For the format, see <https://dvswitch.groups.io/g/Mobile/files/DVSM_02_17_2020.pdf> page 19.

73, Steve N4IRS

On 7/23/20 11:41 PM, Tom Corcoran wrote:

I have a question regarding use of DVS on the DMR+ network. When accessing reflectors (NOT TG's), normal protocol is to connect to the reflector with a private call, then PTT TG9 to QSO. Do I need to include a # when loading the DMR_node_list.txt file? Do I need to include quotes around the reflector number?

4369|||North America  ?
4369#|||North America  ?
"4369#"|||North America  ?

Guidance please.
--
tnx ... Tom VE3NY


DMR_node_list.txt Syntax?

Tom Corcoran
 


I have a question regarding use of DVS on the DMR+ network. When accessing reflectors (NOT TG's), normal protocol is to connect to the reflector with a private call, then PTT TG9 to QSO. Do I need to include a # when loading the DMR_node_list.txt file? Do I need to include quotes around the reflector number?

4369|||North America  ?
4369#|||North America  ?
"4369#"|||North America  ?

Guidance please.
--
tnx ... Tom VE3NY


Re: Hytera Homebrew Bridge

EA5GVK Joaquin
 

This is very good news, great, an open source project to replace the closed source gw_hytera_mmdvm.
Thank you very much for these projects.
We will be looking forward to the project becoming operational.
A greeting and also it is a great news that my friend Waldek wants to join him. Great.
Greetings.
EA5GVK

El mar., 21 jul. 2020 a las 11:56, SP2ONG Waldek (<sp2ong@...>) escribió:
Hi Heiko

Yes, I assumed that this is the status of this project but I wanted to give info, maybe someone would like to help in the development of the project

73 Waldek


Re: Hytera Homebrew Bridge

SP2ONG Waldek
 

Hi Heiko

Yes, I assumed that this is the status of this project but I wanted to give info, maybe someone would like to help in the development of the project

73 Waldek


Re: Hytera Homebrew Bridge

Heiko DL1BZ
 

I spoke with Marek, it is not usable at the moment. It's only a snapshot of his project for save his code at github.
Please have some patience, he work on it. If all will be ready, we will have an open source replacement for gw_hytera_mmdvm (which is gw_hytera_mmdvm not, it's closed source).

73 Heiko, DL1BZ


Hytera Homebrew Bridge

SP2ONG Waldek
 


Maybe someone will be interested in the project re-implementation of linDmrMaster for python3

https://github.com/smarek/Hytera_Homebrew_Bridge

73 Waldek


Add System Fusion to our network

W8DSB
 

All, I have a FM repeater <> ALLSTAR <> DVSWITCH <> HBLINK <> BRANDMEISTER & ALL our CLUBS HOTSPOTS (about 70 of them)

Let me start off by saying I am not a System Fusion users. I own DSTAR and DMR radios so I have to reply on club members to tell me when it works.

I want to add in System Fusion so users with only Fusion radios can come in via digital when outside the repeater area. Right now only DMR users can get in via BM or via a hotspot directly to our HBLINK hub.

What do I need to do to add C4FM to the MIX?

I assume it has to be at the DVSWITCH level. For DMR I used analog_bridge (connects to allstar) <> md380-emu <> mmdvm_bridge (connects to HBLink)

Do I need a second copy of all three services?

Can I turn on System Fusion in the same files DMR is turned on and use one service. If you answer can you please post examples so I can understand more clearly. We are NOT looking to connect to any other System Fusion networks we just want a simple MMDVM hotspot to connect via HBlink and decode to DMR and also to FM as it does now with DMR.

Thanks - Darrell W8DSB


Re: Temperature dvswitch.sh message

Tom Corcoran
 

Tnx Steve ... all I had to do was add full path for dvswitch.sh in last line and script worked. Now to figure out exactly what you've instructed ... continuing linux education.
--
Tom VE3NY

2681 - 2700 of 9518