Date   

Re: new reflector xlx.txi35hams.com

Justin Mann
 

The user is dvswitchtest, and the password is Dvswitch2020!


Re: new reflector xlx.txi35hams.com

Steve N4IRS
 

You may want to change this. You posted to a public group.

Steve N4IRS

On 7/18/20 10:53 AM, Justin Mann via groups.io wrote:
The log in is ai5os, the passwd is Txlk76240.  This user also has sudoer priviledges.


Re: Need help please have issues with connecting to 1999

Mike KB8JNM
 

Have you set-up connection string in rpt.conf for the private node ?

Did you also set a extension for the connection in extensions .conf ?

If you are still at this in the morn I will try again then.

Going to bed.

paste the lines you used so we can look at them

On 7/17/2020 10:04 PM, Jeremy N6NWS 3138138 wrote:
I need help with my node won't connect to 1999 says connection failed my cell is 1-906-364-1858
facebook
https://www.facebook.com/N6NWS


Need help please have issues with connecting to 1999

 

I need help with my node won't connect to 1999 says connection failed my cell is 1-906-364-1858
facebook
https://www.facebook.com/N6NWS


Re: new reflector xlx.txi35hams.com

 

what the login for the stuff


#analog_bridge #mmdvm_bridge #analog_bridge #mmdvm_bridge

 

Need help please have issues with connecting to 1999


new reflector xlx.txi35hams.com

Justin Mann
 

Hi there.  I've just installed a new xlx reflector:
http://xlx.txi35hams.com
My ultimate goal is to get it bridged over to the Texas-i35 system located on FCS reflector 33, Room 30.  Then I'd like to get that all out on to brandmeister.  What's the process for doing this with dvswitch?  I've heard that this application can be used to bridge some different networks between one another?  In full disclosure, I'm learning Debian Linux as i go.
Thanks,
Justin-ai5os


Re: one-way audio issue

Connor Farrell - WG1GEM
 

Well I guess I deserved that for trying to set this up late at night, then not looking close enough at my configs.

The extra zero in the USRP line fixed it. 

Thank you all


Re: one-way audio issue

JJ Cummings
 

including the files themselves is more useful... you also don't have your dvswitch configs included (to look at and match the ports).  Just eyeballing this it looks like an extra zero 0 was added to your USRP channel definition...  Maybe it's intentional and maybe its not?

rxchannel = USRP/127.0.0.1:34001:32001
vs what you have
rxchannel = USRP/127.0.0.1:34001:320001

Funny that - you can't hear audio _from_ DMR to ASL.. the port with the extra zero is the port that ASL listens on to receive the traffic from analog_bridge...

On Thu, Jul 16, 2020 at 4:56 PM Connor Farrell - WG1GEM <Connor@...> wrote:
Here's the information from the various config files. I pulled just about all of it from the google doc instructions

Host node: 49382
DMR node: 1999

rpt.conf

[1999] stanza for node 1999 - https://i.imgur.com/f3sgPoI.png


[nodes] stanza defining node 1999 - https://i.imgur.com/yq5Kl3b.png


extensions.conf
node 1999 defined in [globals] and [radio-secure] - https://i.imgur.com/Q8d4fFR.png


modules.conf
USRP driver should be loading - https://i.imgur.com/vzFgvOG.png


Asterisk CLI
rpt stats 1999 shows as linked to 49382 - https://i.imgur.com/i7y1GRc.png


Re: one-way audio issue

Connor Farrell - WG1GEM
 

Steve,

My mistake in thinking that the connection between Analog_Bridge and Asterisk used TLV. 

In netstat, it appears that asterisk is not listening on the specified USRP port. Just to see, I tried modifying my configuration for the DMR node to use the pseudo driver instead of USRP to see if the ports asterisk was listening on changed and they did. - https://i.imgur.com/NB57yQO.png


Re: one-way audio issue

Connor Farrell - WG1GEM
 

Here's the information from the various config files. I pulled just about all of it from the google doc instructions

Host node: 49382
DMR node: 1999

rpt.conf

[1999] stanza for node 1999 - https://i.imgur.com/f3sgPoI.png


[nodes] stanza defining node 1999 - https://i.imgur.com/yq5Kl3b.png


extensions.conf
node 1999 defined in [globals] and [radio-secure] - https://i.imgur.com/Q8d4fFR.png


modules.conf
USRP driver should be loading - https://i.imgur.com/vzFgvOG.png


Asterisk CLI
rpt stats 1999 shows as linked to 49382 - https://i.imgur.com/i7y1GRc.png


Re: one-way audio issue

Ryan Reid
 

What do you have in your /etc/asterisk/rpt.conf  and /etc/asterisk/extensions.conf  for DMR?

 


Re: one-way audio issue

Steve N4IRS
 

Connor,
The connection between Analog_Bridge and Asterisk is VIA chan_usrp. The data is usrp not TLV. Make sure you have chan_usrp setup. Netstat -unap is your friend.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Connor Farrell - WG1GEM <Connor@...>
Sent: Thursday, July 16, 2020 5:06:25 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] one-way audio issue
 
Howdy all,

I'm currently attempting to set up a DMR/AllStar bridge. Right now
AllStar to DMR is functioning perfectly. Where I'm running into an issue
is going from DMR to AllStar.


I've checked my configs and the ports all appear to be in agreement.
Looking at the logs, it appears the audio makes it as far as analog
bridge, but doesn't make it from analog bridge to allstar.

I believe my issue is on the Asterisk side of things, as I do not see
asterisk listening for the TLV frames in netstat. Similarly, running
tcpdump, analog bridge is sending out data, but allstar appears to not
be listening.


Any thoughts or ideas would be appreciated.

Connor

--
Connor J. Farrell '21
WG1GEM
'20-21 W5AC President
Electronic Systems and Engineering Technology
Meteorology Minor
Texas A&M University
president@...





one-way audio issue

Connor Farrell - WG1GEM
 

Howdy all,

I'm currently attempting to set up a DMR/AllStar bridge. Right now AllStar to DMR is functioning perfectly. Where I'm running into an issue is going from DMR to AllStar.


I've checked my configs and the ports all appear to be in agreement. Looking at the logs, it appears the audio makes it as far as analog bridge, but doesn't make it from analog bridge to allstar.

I believe my issue is on the Asterisk side of things, as I do not see asterisk listening for the TLV frames in netstat. Similarly, running tcpdump, analog bridge is sending out data, but allstar appears to not be listening.


Any thoughts or ideas would be appreciated.

Connor

--
Connor J. Farrell '21
WG1GEM
'20-21 W5AC President
Electronic Systems and Engineering Technology
Meteorology Minor
Texas A&M University
president@w5ac.tamu.edu


Re: Switching to Phoenix at command line

Ian
 

As Far As I (know)
 
 
 
 
 

-------Original Message-------
 
Date: 07/15/20 14:20:46
Subject: Re: [DVSwitch] Switching to Phoenix at command line
 

Thank you, I have now got the script working.

Not sure what AFAI refers too?

 


Re: Switching to Phoenix at command line

Derek William Haden <facebook@...>
 

Thank you, I have now got the script working.

Not sure what AFAI refers too?


Re: Switching to Phoenix at command line

Ian
 

Just to point you in the right direction ,,
DMR+  is port 5555  and password  is PASSWORD .
AFAI remember.
 
G0TJH 
 
 
 
 

-------Original Message-------
 
Date: 07/15/20 11:56:28
Subject: Re: [DVSwitch] Switching to Phoenix at command line
 

So I think I went off on the wrong track, what I need to connect to is

DMR+ not Phoenix, sorry real new to DMR.

In the script I have to change to BM this command is implemented

/opt/Analog_Bridge/dvswitch.sh tune passw0rd@...:62031

What I am looking for is a similar command but to switch to DMR+

As always appreciate support and time and effort involved.

 


Re: Switching to Phoenix at command line

Derek William Haden <facebook@...>
 

So I think I went off on the wrong track, what I need to connect to is

DMR+ not Phoenix, sorry real new to DMR.

In the script I have to change to BM this command is implemented

/opt/Analog_Bridge/dvswitch.sh tune passw0rd@...:62031

What I am looking for is a similar command but to switch to DMR+

As always appreciate support and time and effort involved.


Re: Switching to Phoenix at command line

Derek William Haden <facebook@...>
 

Thanks Steve, I'll give it a try.

I am assuming Enable needs to be 1?


On Tue, Jul 14, 2020 at 09:40 AM, Steve N4IRS wrote:
[DMR Network]
Enable=0
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0


Re: Switching to Phoenix at command line

Steve N4IRS
 

From what I can Google, you will need the login for that network. I am guessing when I say, put the login info in MMDVM_Bridge.ini

[DMR Network]
Enable=0
Address=hblink.dvswitch.org
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

Steve N4IRS

On 7/14/2020 12:05 PM, Derek William Haden wrote:

Well connect to the DMR phoenix network.

If in DMR mode I believe that *D from DVswitch mobile switches to Phoenix.

I have some scripts installed that were written by WA3LXD I beleive, these switch between DStar, DMR TGIF, DMR BM, and YSF, and load up a customised TG list for each mode.

I want to add Phoenix to the scripts so they switch to that system. All my local Repeaters are on Phoenix, if they were on BM I wouldn't need this.


2961 - 2980 of 9775