Date   

DVSwitch-Mobile with ASL - control codes ignored and macros lost.

Barry G4MKT
 

I installed DVSwich-Mobile from the Play Store on my Android phone to control and connect to my AllStar-Link node.
I can connect to the node and have PTT, audio TX and RX but cannot see anything received by asterisk at the node when I try to send it control codes like *73 or a *3<nodenumber>.

Another issue is that when I configure macros, they don't survive a re-start of the application.
What am I doing wrong?

Version is 1.56 (128)
Android-8.1.0


Re: Connection problem on Brandmeister PH5151 #brandmeister

Steve N4IRS
 

What IP address are you connecting to? Please post your [DMR Network] stanza from MMDVM_Bridge.ini

Steve N4IRS

On 6/19/20 4:14 AM, ramon paulino wrote:
Hi,
This is DU1ZC and newbie here,
I would like to ask any idea why I cannot connect to BM PH5151 but can connect to BM USA 3103?
However, my MMDVm hotspot can connect to BM PH 5151 server.
Thank You


Connection problem on Brandmeister PH5151 #brandmeister

ramon paulino
 

Hi,
This is DU1ZC and newbie here,
I would like to ask any idea why I cannot connect to BM PH5151 but can connect to BM USA 3103?
However, my MMDVm hotspot can connect to BM PH 5151 server.
Thank You


Re: Multiple instances of Bridge

W8DSB
 

All, i was able to install HBlink and use that to route the audio between repeaters,  BrandMeister  and the XLX modules. Thanks for all replies and help.


Re: YSF <--> DMR Bridge BM blocked

Bj DV8AWC
 
Edited

As referred by Geoffrey VE6GCD this solves the "user blocked". Learning new things from his information. 73


Thanks
BJ DV8AWC


Re: YSF <--> DMR Bridge BM blocked

Alec-N1AJW
 

i am getting the same thing occasionally on my setup using on DVSwitch on VM.  I will also try to connect MMDVM_Bridge as a repeater (duplex) rather then hotspot (simplex) and see if it works.  thanks for that information.  


Alec
N1AJW


Re: YSF <--> DMR Bridge BM blocked

ve6gcd@...
 

I have tried all sorts of methods in the past, the first effective workaround was to use Analog Bridge between DMR and YSF where the DMR side has 2000ms hang time from Analog Bridge. The drawback is that the callsign info is not passed to YSF/DMR in this process.

Eventually, I figured that the best approach to solve this is for you to connect to Brandmeister not as a hotspot, but as a repeater network. By doing this, you will avoid encountering the "user blocked" message completely and without the need for hang time settings.

Option 1: Request a bridge to Brandmeister

https://wiki.brandmeister.network/index.php/Open_Bridge
https://wiki.brandmeister.network/index.php/XLX
https://wiki.brandmeister.network/index.php/WIRES-X
https://wiki.brandmeister.network/index.php/IMRS

Option 2: DIY
https://wiki.brandmeister.network/index.php/Homebrew_repeater_protocol
https://brandmeister.network/?page=repeaters then try to learn the software they used to connect to Brandmeister. 

73,
Geoffrey VE6GCD


Re: YSF <--> DMR Bridge BM blocked

Bj DV8AWC
 
Edited

found a temporary workaround for this using two nodes of usrp with primary node as YSF and second node as DMR with added minTxTimeMS to prevent blocked message from BM (bridge removed). Audio quality is OK going from digital -> analog, gonna test the reverse if it still good.

UPDATE:
Not recommended, degraded audio quality and wont pass the ID's. It's better to use the bridge.

Thanks
BJ DV8AWC


YSF <--> DMR Bridge BM blocked

Bj DV8AWC
 

I have a working YSF <--> DMR Bridge but sometimes it gets blocked from BM due to short rapid ptt press on the analog side of the DR-2X which is also connected to the YSF side of the bridge. Is there a workaround for this or adding some minTxTimeMS like on the analog bridge ini to the mmdvm bridge ini for the YSF section?

Thanks
BJ DV8AWC


Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector

Steve N4IRS
 

On 6/13/20 8:34 AM, Adrianm0glj@... wrote:
On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_Bridge
Thanks Steve.

Where would I find this package?

Adrian M0GLJ


Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector

Adrianm0glj@...
 

On Sat, Jun 13, 2020 at 01:58 AM, Steve N4IRS wrote:
MMDVM_Bridge
Thanks Steve.

Where would I find this package?

Adrian M0GLJ


Re: Setting up a YSF Reflector <---> XLX (DMR) Reflector

Steve N4IRS
 

We don't use YSF2DMR. If you want to bridge the 2 networks use MMDVM_Bridge.

Steve N4IRS

On 6/12/20 8:50 PM, Adrianm0glj@... wrote:
Hi All

I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the instructions on https://github.com/juribeparada/MMDVM_CM/blob/master/YSF2DMR/service/README.md to setup the unit file and I have the XLXHosts.txt file downloaded from http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster

However, I am getting and error when I start the unit file.

--->snip<---
root@vps-4a62c445:/usr/local/bin# sudo systemctl status ysf2dmr
● ysf2dmr.service - YSF2DMR Service
   Loaded: loaded (/lib/systemd/system/ysf2dmr.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2020-06-13 01:49:01 BST; 5s ago
  Process: 2374 ExecStop=/usr/local/sbin/ysf2dmr.service stop (code=exited, status=1/FAILURE)
  Process: 2362 ExecStart=/usr/local/sbin/ysf2dmr.service start (code=exited, status=0/SUCCESS)
 Main PID: 2362 (code=exited, status=0/SUCCESS)

Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354 General Parameters
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Remote Gateway: no
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Hang Time: 1000 ms
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.354 Opening YSF network connection
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.355 Trying to find non existent XLX reflector with an id of 5
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: E: 2020-06-13 00:49:01.355 Cannot open DMR Network
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: YSF2DMR started as PID
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2374]: YSF2DMR is not running
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Control process exited, code=exited status=1
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Failed with result 'exit-code'.
root@vps-4a62c445:/usr/local/bin#

 
--->snip<---

Could someone give me some tips on where to look for the obvious mistake that I have made the is not hitting me on the head please?

Thanks in Advance
Adrian M0GLJ


Setting up a YSF Reflector <---> XLX (DMR) Reflector

Adrianm0glj@...
 

Hi All

I'm trying to setup a YSF Reflecter to XLX(DMR) reflector. The YSFReflector is working. From what I have read I should be able to use YSF2DMR to bridge the 2 networks.
I have followed the instructions on https://github.com/juribeparada/MMDVM_CM/blob/master/YSF2DMR/service/README.md to setup the unit file and I have the XLXHosts.txt file downloaded from http://xlxapi.rlx.lu/api.php?do=GetXLXDMRMaster

However, I am getting and error when I start the unit file.

--->snip<---
root@vps-4a62c445:/usr/local/bin# sudo systemctl status ysf2dmr
● ysf2dmr.service - YSF2DMR Service
   Loaded: loaded (/lib/systemd/system/ysf2dmr.service; enabled; vendor preset: enabled)
   Active: failed (Result: exit-code) since Sat 2020-06-13 01:49:01 BST; 5s ago
  Process: 2374 ExecStop=/usr/local/sbin/ysf2dmr.service stop (code=exited, status=1/FAILURE)
  Process: 2362 ExecStart=/usr/local/sbin/ysf2dmr.service start (code=exited, status=0/SUCCESS)
 Main PID: 2362 (code=exited, status=0/SUCCESS)

Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354 General Parameters
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Remote Gateway: no
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: I: 2020-06-13 00:49:01.354     Hang Time: 1000 ms
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.354 Opening YSF network connection
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: M: 2020-06-13 00:49:01.355 Trying to find non existent XLX reflector with an id of 5
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: E: 2020-06-13 00:49:01.355 Cannot open DMR Network
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2362]: YSF2DMR started as PID
Jun 13 01:49:01 vps-4a62c445 ysf2dmr.service[2374]: YSF2DMR is not running
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Control process exited, code=exited status=1
Jun 13 01:49:01 vps-4a62c445 systemd[1]: ysf2dmr.service: Failed with result 'exit-code'.
root@vps-4a62c445:/usr/local/bin#

 
--->snip<---

Could someone give me some tips on where to look for the obvious mistake that I have made the is not hitting me on the head please?

Thanks in Advance
Adrian M0GLJ


Re: YSF <> BM DMR Bridging - Best Way?

J M
 

After doing even more reading and experimenting, I got this all worked out. I ended up switching XLX back to serving D-STAR + DMR, C4FM using YSFReflector, and tying those two together with MMDVM_Bridge. Everything seems to be working.


YSF <> BM DMR Bridging - Best Way?

J M
 

Hello all,

Is there any document/guidance on building a YSF to DMR (BM) connection the right way? Here's the situation.... I run XLX330 using xlxd + ambed. At one point it was working across all three modes (D-STAR, DMR, YSF) but something recently changed (seems like with BM DMR, but can't figure it out precisely) and the ambed process was exhausting the 3 channels available for transcoding. So I disabled our transcode link with BM3103 (TG #311070) and everything works fine with D-STAR <> YSF transcoding as it did before. D-STAR is public as DCS/XRF/REF330A and YSF is public as #83603. I want to re-add the DMR transcoding to the mix. I've tried MMDVM_Bridge to connect to the XLXD process using YSF and BM3103 for DMR. However I cannot get the connection to login whether using my personal ID or one of the repeater IDs. I also know that connecting to BM directly with MMDVM_Bridge isn't really supposed to be done, but I wanted to get stuff back on the air temporarily until we get a permanent solution. I can't find any further debugging/troubleshooting on the login process to tell me what is actually wrong. I can see the packets going back and forth in tcpdump but all I get is "DMR, Connection to the master has timed out, retrying connection". So I'm looking for different options.

Anyway, all that being said, is there a best way to do this? I was considering re-enabling DMR interlinking on XLX try to go the other way to another YSF service, but I'm not entirely clear how to host the YSF gateway in a separate application.

Anyone able to help?

Thanks in advance,
Jason N8EI


Re: radioid.net URL update in dvswitch.sh

Jeffrey [K8JTK]
 

Edit dvswitch.sh changing
from: www.radioid.net
to: database.radioid.net
After changing, run the script manually to immediately update the subscribers file or wait until it runs automatically.


Re: Multiple instances of Bridge

W8DSB
 

Version 1.4.2


Re: radioid.net URL update in dvswitch.sh

Giannis Giannakosian - SV4FFB
 

On Thu, Jun 4, 2020 at 07:35 AM, Jeffrey [K8JTK] wrote:
A pull of the DVSwitch-System-Builder has the old URL.  If an update is already available, it has the old url in that repo.
Hi Jeffrey

I have the same problem with the database.
Is it possible to upload the changes you made so that I can update the database manual until an update comes out?


Re: Multiple instances of Bridge

W8DSB
 

Hi Mike, I can’t get to the version number from work as I can’t login to Amazon without a private key. However looking at my dropbox at the .ini I have no TXport or RXport listed in the file. Can you please post a example and I will add it in.


Re: Multiple instances of Bridge

Mike Zingman - N4IRR
 

Do not use fromDMRPort and toDMRPort.  I asked you to use TXPort and RXPort in AB.  You should have gotten a nasty message in your AB log file, did you see it?
Also, just to make sure, what version of AB are you using?

3001 - 3020 of 9589