Date   

Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge #mmdvm_bridge >> Intruder Problem #mmdvm_bridge

Uli
 

Hello All,
A while ago, I have setup successfully two separate bridges one from BM to YSF and one from YSF to XLX. Worked fine for a while.

Now somebody connects every few minutes via a YSF Gateway from outside and starts to do brief connects like 5-10 within a few seconds shortly after my YSF Reflector is rebooted. For sure, that triggers the BM Loopban block and generates the dreaded "crkcrkcrk" Message that translates to "user blocked"
Instead of a Callsign it only shows NOCALL and the Callsign of the gateway it is coming from.

The idea now is to connect XLX direct to a BM TG and shut down the YSF Reflector alltogether. I have read the whole thread above but It´s not clear to me where I put the TG in that I want to connect to on BM.
I do not want to use DMRGateway, as Steve mentioned it can be done just with 2 MB instances. Where do I put the TG  (i assume somewhere in DVSwitch.ini??) and how can I check if I have the latest Version of MMDVM_Bridge installed (Steve mentioned earlier that there is a new Version that enables this connect between XLX and BM TG)

Any help is greatly appreciated
Uli


Re: Dashboard Installation php error on installation of 5 or 7

Tom Corcoran
 

NP. Just wondered if there was a different approach if using buster. Lots of other features that your team has developed to be explored - ad hoc menus for one, also like features of pyUC dashboard. 
--
Tom VE3NY


Re: Dashboard Installation php error on installation of 5 or 7

Steve N4IRS
 

The dashboard is a work in progress. It is on my ever expanding like of things to work on. It's a nice to have but not a priority. Same goes for a local display like Nextion.

Steve N4IRS

On 5/28/2020 7:16 AM, Tom Corcoran wrote:
Steve,
I am using Buster. My dashboard shows current tx only and no LH list. Is there a different install process?
--
Tom VE3NY


Re: Dashboard Installation php error on installation of 5 or 7

Tom Corcoran
 

Steve,
I am using Buster. My dashboard shows current tx only and no LH list. Is there a different install process?
--
Tom VE3NY


Re: Dashboard Installation php error on installation of 5 or 7

John K1IF
 

yep you're correct... , its a problem with Nextion not connecting after a reboot. When I burn a saved img it loads but when I reboot or shutdown and turn back on it doesn't load. I gotta work on that but the dashboard does load.


Re: Dashboard Installation php error on installation of 5 or 7

Steve N4IRS
 

There is no connection between the two. The dashboard scrapes the log file.

On 5/27/2020 11:41 AM, John K1IF via groups.io wrote:
Ok the dashboard finally came up after a long wait. My Nextion screen is no longer connecting though.


Re: Dashboard Installation php error on installation of 5 or 7

John K1IF
 

Ok the dashboard finally came up after a long wait. My Nextion screen is no longer connecting though.


Re: Dashboard Installation php error on installation of 5 or 7

Steve N4IRS
 

# Install the dashboard
#


apt-get install lighttpd -y

apt-get install php7.3-cgi -y

chown -R www-data:www-data /var/www/html
chmod -R 775 /var/www/html

lighty-enable-mod fastcgi
lighty-enable-mod fastcgi-php

FILE=/var/www/html/index.lighttpd.html
if test -f "$FILE"; then
    mv /var/www/html/index.lighttpd.html /var/www/html/index.lighttpd.html.old
fi

systemctl restart lighttpd


On 5/27/2020 10:37 AM, John K1IF via groups.io wrote:
buster light


Re: Dashboard Installation php error on installation of 5 or 7

John K1IF
 

buster light


Re: Dashboard Installation php error on installation of 5 or 7

Steve N4IRS
 

What OS version are you trying to install on?

On 5/27/2020 9:45 AM, John K1IF via groups.io wrote:
I'm trying to install the Dashboard and using the set-by-step instructions and get to step 5 where php must be installed but keep receiving the following errors when I try to install 5 or 7:

Package php5 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

Package php5-cgi is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

Package php5-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'php5-common' has no installation candidate
E: Package 'php5-cgi' has no installation candidate
E: Package 'php5' has no installation candidate

same thing if I try installing 7



Dashboard Installation php error on installation of 5 or 7

John K1IF
 

I'm trying to install the Dashboard and using the set-by-step instructions and get to step 5 where php must be installed but keep receiving the following errors when I try to install 5 or 7:

Package php5 is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

Package php5-cgi is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

Package php5-common is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package 'php5-common' has no installation candidate
E: Package 'php5-cgi' has no installation candidate
E: Package 'php5' has no installation candidate

same thing if I try installing 7


Re: Will Nextion Screen work with dvswitch?

John K1IF
 

Jason

Can you email the .HMI file


Thanks John


Re: Will Nextion Screen work with dvswitch?

Jason - WY7JT
 


Thanks Steve for the update to get it working. I'm enjoying the current functionality as I can look over to see who is transmitting when in my shack.

Jason - WY7JT


On Tue, May 26, 2020 at 9:49 AM Steve N4IRS <szingman@...> wrote:
These things may be looked at some time in the future. Maybe when the dashboard gets addressed.  We have a pretty big Todo list. (moving target).

Steve N4IRS

Sent by smoke signal (AT&T)


Re: Will Nextion Screen work with dvswitch?

John K1IF
 

understood Steve thanks for getting it going!


Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

These things may be looked at some time in the future. Maybe when the dashboard gets addressed.  We have a pretty big Todo list. (moving target).

Steve N4IRS

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Jason Turning <cturning1@...>
Sent: Tuesday, May 26, 2020 11:45:14 AM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] Will Nextion Screen work with dvswitch?
 
I'm seeing the same thing. I just tried to add RFModeHang to the ini, but it doesn't seem to pick it up. I think some of this needs to be enabled with MMDVM_Bridge. 

Jason - WY7JT

On Tue, May 26, 2020 at 9:40 AM John K1IF via groups.io <izzy_y2k=yahoo.com@groups.io> wrote:
This is when I invoked from B menu the INFO but when I transmit, it does not show my info on my Nextion also it does not go to idle page after time expired when no signals are received. not sure why but i guess it is just how the dvswitch program sends info? (not sure) I would like to verify with other running if same for them too.


K1IF John


Re: Will Nextion Screen work with dvswitch?

Jason - WY7JT
 

I'm seeing the same thing. I just tried to add RFModeHang to the ini, but it doesn't seem to pick it up. I think some of this needs to be enabled with MMDVM_Bridge. 

Jason - WY7JT

On Tue, May 26, 2020 at 9:40 AM John K1IF via groups.io <izzy_y2k=yahoo.com@groups.io> wrote:
This is when I invoked from B menu the INFO but when I transmit, it does not show my info on my Nextion also it does not go to idle page after time expired when no signals are received. not sure why but i guess it is just how the dvswitch program sends info? (not sure) I would like to verify with other running if same for them too.


K1IF John


Re: Will Nextion Screen work with dvswitch?

John K1IF
 

This is when I invoked from B menu the INFO but when I transmit, it does not show my info on my Nextion also it does not go to idle page after time expired when no signals are received. not sure why but i guess it is just how the dvswitch program sends info? (not sure) I would like to verify with other running if same for them too.


K1IF John


Re: Will Nextion Screen work with dvswitch?

Jason - WY7JT
 

My picture was receiving. It's not picking up when I transmit at the moment. 

Jason - WY7JT

On Tue, May 26, 2020 at 8:31 AM 정성환 <ds5hvm@...> wrote:
Hi Jason,

Is this picture in transmitting your signal or receiving signal from others?


Re: Will Nextion Screen work with dvswitch?

Jason - WY7JT
 

I used a USB to TTL serial adapter as I have a fan plugged into the GPIO pins. That dashboard project is processor intensive in its current state and would make the Pi 3B+ get pretty warm so I put a pi fan in the slot of the case. The funny thing is I've tried to buy two cases to better cool it and neither was as effective as that fan and case which keeps it about 41F. So the other cases got repurposed to other Pi projects

Jason - WY7JT

On Mon, May 25, 2020, 22:15 John K1IF via groups.io <izzy_y2k=yahoo.com@groups.io> wrote:
Jason Wy7JT
 
Are you connecting to USB or GPIO?


Re: Will Nextion Screen work with dvswitch?

정성환
 

Hi Jason,

Is this picture in transmitting your signal or receiving signal from others?

3141 - 3160 of 9600