Date   

Re: MMDVM_Bridge doesn't appear to be connecting to ircddbgateway

Matthew 2E0SIP
 
Edited

Thanks both! I think it was just a case of not seeing the logs, but it was working in the background.
 
Mike - I've updated the Modules to match.

I've got a bit further and I'm now running :
 
DMR <-> MMDVM_Bridge <-> Analog Bridge <-> Analog Bridge <-> MMDVM_Bridge <-> ircddbgateway <-> DStar XLX

I can DStar to DMR is working, but DMR to DStar is not. Transcoding seems to be working, both Analog Bridge instances are showing Ptt Up etc, and AMBE frames are reaching both dongles.

I see packets get as far as XLX, but nothing is showing in the Dashboard. Am I missing something? - ircddbgateway is showing as logged in on the dashboard.
 
Thanks again
 
Edited: ( I can actually see packets reaching XLX, but nothing on the Dash, and DStar users don't receive anything) 


attenuating USRP gain post-AGC processing

Patrick Perdue
 

Hi:

I have a bridge set up using AGC with the following parameters:

usrpAudio = AUDIO_USE_AGC                 ; Digital -> Analog (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_USE_AGC)
usrpGain = 0.50                         ; Gain factor when usrpAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)
usrpAgc = -19,10,200                    ; Set the agc threshold (db), slope (db) and decay (ms)
This sounds great, but I want to reduce the output of the processed audio by just a couple DB going into ASL. It doesn't appear that the usrpGain value does anything when set to usrpAudio = AUDIO_USE_AGC, which, I believe, is expected behavior.

Yes, I could raise the threshold to something closer to 0, but I want the processing as-is, just with a trim on the output. Actually, I would like to possibly make the processing even more aggressive (lower threshold and longer release) to comp for some lower levels and keep higher ones in check), but then reduce that output by, say, 3 to 6 db coming into ASL's USRP driver. Is this at all possible with one instance of A_B, or can I use a second instance of A_B just as an attenuater? With older versions of A_B, this could be done, but the AGC algorithm was practically useless.


Re: MMDVM_Bridge doesn't appear to be connecting to ircddbgateway

Mike Zingman - N4IRR
 

Make your Modules match. You have “C” and “G”


Re: MMDVM_Bridge doesn't appear to be connecting to ircddbgateway

Steve N4IRS
 

Matthew,
What I see here depends on which of the two components is start first. If I start MB then ircDDBGateway I see indication in the MB log when ircDDBGateway initializes.

MB:
M: 2020-05-31 11:05:55.799 D-Star, received network header from N4IRS   /INFO to CQCQCQ 
M: 2020-05-31 11:05:58.284 D-Star, received network end of transmission, 2.5 seconds, 0% packet loss, BER: 0.0%

After I issue a remotecontrold command this is logged in MB:

M: 2020-05-31 11:16:06.641 D-Star link status set to "Linking to REF078 B "
M: 2020-05-31 11:16:06.678 D-Star link status set to "Linked to REF078 B  "

If ircddbgatewayd is run first. I see no indication in the MB log. When I issue a remotecontrold command:

M: 2020-05-31 11:20:39.219 D-Star link status set to "Linking to REF078 B "
M: 2020-05-31 11:20:39.261 D-Star link status set to "Linked to REF078 B  "
M: 2020-05-31 11:20:41.272 D-Star, received network header from N4IRS   /INFO to CQCQCQ   via REF078 B
M: 2020-05-31 11:20:48.317 D-Star, received network end of transmission, 7.1 seconds, 0% packet loss, BER: 0.0%


I would also turn on debug in the [D-Star Network] stanza.

hope this helps,
Steve N4IRS


On 5/31/20 6:09 AM, Matthew 2E0SIP wrote:

Hi All,

I've recently been playing with the DVSwitch software again after a bit a hiatus . The pre-compiled packages are a dream so thanks to everyone involved. 

I am in the process of setting up a D-Star to DMR bridge. I've got ircddbgateway up and working, but when I start MMDVM_Bridge I don't see any notification in the logs to indicate it's connected to ircddbgateway, and if I run a packet capture I only see very occasional packets going to port 20010 and nothing back. With MMDVMHost and ircddbgateway on pi-star with a similar configuration I get the more affirmative log line `D-Star link status set to "Linking to DCS061"`


Am I missing something?

Thanks, Matthew 2E0SIP

MMDMV_Bridge.ini

[General]
Callsign=2E0SIP
Id=234326505
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge_DStar

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=1
Module=C

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=1

[DMR Network]
Enable=0
Jitter=360
Local=62032
Address=87.117.229.173
Password="passw0rd"
Port=62031

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


/etc/ircddbgateay

gatewayType=1
gatewayCallsign=M0OUK
gatewayAddress=0.0.0.0
icomAddress=172.16.0.20
icomPort=20000
hbAddress=127.0.0.1
hbPort=20010
latitude=50.00
longitude=-3.00
description1=Watford, IO91
description2=United Kingdom
url=http://www.mw0mwz.co.uk/pi-star/
repeaterCall1=M0OUK
repeaterBand1=G
repeaterType1=0
repeaterAddress1=127.0.0.1
repeaterPort1=20011
reflector1=DCS061 C
atStartup1=1
reconnect1=0
frequency1=438.80000
offset1=0.0000
rangeKms1=1.000
latitude1=50.00
longitude1=-3.00
agl1=3.000
description1_1=Watford, IO91
description1_2=United Kingdom
url1=
band1_1=0
band1_2=0
band1_3=0
repeaterCall2=
repeaterBand2=
repeaterType2=0
repeaterAddress2=127.0.0.1
repeaterPort2=20012
reflector2=
atStartup2=0
reconnect2=0
frequency2=0.00000
offset2=0.0000
rangeKms2=0.000
latitude2=0.000000
longitude2=0.000000
agl2=0.000
description2_1=
description2_2=
url2=
band2_1=0
band2_2=0
band2_3=0
repeaterCall3=
repeaterBand3=
repeaterType3=0
repeaterAddress3=127.0.0.1
repeaterPort3=20013
reflector3=
atStartup3=0
reconnect3=0
frequency3=0.00000
offset3=0.0000
rangeKms3=0.000
latitude3=0.000000
longitude3=0.000000
agl3=0.000
description3_1=
description3_2=
url3=
band3_1=0
band3_2=0
band3_3=0
repeaterCall4=
repeaterBand4=
repeaterType4=0
repeaterAddress4=127.0.0.1
repeaterPort4=20014
reflector4=
atStartup4=0
reconnect4=0
frequency4=0.00000
offset4=0.0000
rangeKms4=0.000
latitude4=0.000000
longitude4=0.000000
agl4=0.000
description4_1=
description4_2=
url4=
band4_1=0
band4_2=0
band4_3=0
ircddbEnabled=1
ircddbHostname=rr.openquad.net
ircddbUsername=M0OUK
ircddbPassword=
ircddbEnabled2=0
ircddbHostname2=group1-irc.ircddb.net
ircddbUsername2=
ircddbPassword2=
ircddbEnabled3=0
ircddbHostname3=
ircddbUsername3=
ircddbPassword3=
ircddbEnabled4=0
ircddbHostname4=
ircddbUsername4=
ircddbPassword4=
aprsEnabled=1
aprsPassword=14500
aprsHostname=euro.aprs2.net
aprsPort=14580
dextraEnabled=1
dextraMaxDongles=5
dplusEnabled=1
dplusMaxDongles=5
dplusLogin=M0OUK
dcsEnabled=1
ccsEnabled=1
ccsHost=CCS706
xlxEnabled=0
xlxOverrideLocal=0
xlxHostsFileUrl=
starNetBand1=B
starNetCallsign1=
starNetLogoff1=
starNetInfo1=
starNetPermanent1=
starNetUserTimeout1=
starNetGroupTimeout1=
starNetCallsignSwitch1=1
starNetTXMsgSwitch1=1
starNetReflector1=
starNetBand2=B
starNetCallsign2=
starNetLogoff2=
starNetInfo2=
starNetPermanent2=
starNetUserTimeout2=
starNetGroupTimeout2=
starNetCallsignSwitch2=1
starNetTXMsgSwitch2=1
starNetReflector2=
starNetBand3=A
starNetCallsign3=
starNetLogoff3=
starNetInfo3=
starNetPermanent3=
starNetUserTimeout3=
starNetGroupTimeout3=
starNetCallsignSwitch3=0
starNetTXMsgSwitch3=1
starNetReflector3=
starNetBand4=A
starNetCallsign4=
starNetLogoff4=
starNetInfo4=
starNetPermanent4=
starNetUserTimeout4=
starNetGroupTimeout4=
starNetCallsignSwitch4=0
starNetTXMsgSwitch4=1
starNetReflector4=
starNetBand5=A
starNetCallsign5=
starNetLogoff5=
starNetInfo5=
starNetPermanent5=
starNetUserTimeout5=
starNetGroupTimeout5=
starNetCallsignSwitch5=0
starNetTXMsgSwitch5=1
starNetReflector5=
remoteEnabled=1
remotePassword=raspberry
remotePort=10022
language=0
infoEnabled=1
echoEnabled=1
logEnabled=1
dratsEnabled=1
dtmfEnabled=1
mobileGPSEnabled=0
mobileGPSAddress=127.0.0.1
mobileGPSPort=7834
windowX=-1
windowY=-1


MMDVM_Bridge doesn't appear to be connecting to ircddbgateway

Matthew 2E0SIP
 

Hi All,

I've recently been playing with the DVSwitch software again after a bit a hiatus . The pre-compiled packages are a dream so thanks to everyone involved. 

I am in the process of setting up a D-Star to DMR bridge. I've got ircddbgateway up and working, but when I start MMDVM_Bridge I don't see any notification in the logs to indicate it's connected to ircddbgateway, and if I run a packet capture I only see very occasional packets going to port 20010 and nothing back. With MMDVMHost and ircddbgateway on pi-star with a similar configuration I get the more affirmative log line `D-Star link status set to "Linking to DCS061"`


Am I missing something?

Thanks, Matthew 2E0SIP

MMDMV_Bridge.ini

[General]
Callsign=2E0SIP
Id=234326505
Timeout=180
Duplex=0

[Info]
RXFrequency=222340000
TXFrequency=224940000
Power=1
Latitude=41.7333
Longitude=-50.3999
Height=0
Location=Iceberg, North Atlantic
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch

[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge_DStar

[DMR Id Lookup]
File=/var/lib/mmdvm/DMRIds.dat
Time=24

[NXDN Id Lookup]
File=/var/lib/mmdvm/NXDN.csv
Time=24

[Modem]
Port=/dev/null
RSSIMappingFile=RSSI.dat
Trace=0
Debug=0

[D-Star]
Enable=1
Module=C

[DMR]
Enable=0
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[System Fusion]
Enable=0

[P25]
Enable=0
NAC=293

[NXDN]
Enable=0
RAN=1
Id=12345

[D-Star Network]
Enable=1
GatewayAddress=127.0.0.1
GatewayPort=20010
LocalPort=20011
Debug=1

[DMR Network]
Enable=0
Jitter=360
Local=62032
Address=87.117.229.173
Password="passw0rd"
Port=62031

# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=0
LocalAddress=0
LocalPort=3200
GatewayAddress=ysfreflector.dvswitch.org
GatewayPort=42166
Debug=0

[P25 Network]
Enable=0
GatewayAddress=127.0.0.1
GatewayPort=42020
LocalPort=32010
Debug=0

[NXDN Network]
Enable=0
#LocalAddress=127.0.0.1
Debug=0
LocalPort=14021
GatewayAddress=127.0.0.1
GatewayPort=14020


/etc/ircddbgateay

gatewayType=1
gatewayCallsign=M0OUK
gatewayAddress=0.0.0.0
icomAddress=172.16.0.20
icomPort=20000
hbAddress=127.0.0.1
hbPort=20010
latitude=50.00
longitude=-3.00
description1=Watford, IO91
description2=United Kingdom
url=http://www.mw0mwz.co.uk/pi-star/
repeaterCall1=M0OUK
repeaterBand1=G
repeaterType1=0
repeaterAddress1=127.0.0.1
repeaterPort1=20011
reflector1=DCS061 C
atStartup1=1
reconnect1=0
frequency1=438.80000
offset1=0.0000
rangeKms1=1.000
latitude1=50.00
longitude1=-3.00
agl1=3.000
description1_1=Watford, IO91
description1_2=United Kingdom
url1=
band1_1=0
band1_2=0
band1_3=0
repeaterCall2=
repeaterBand2=
repeaterType2=0
repeaterAddress2=127.0.0.1
repeaterPort2=20012
reflector2=
atStartup2=0
reconnect2=0
frequency2=0.00000
offset2=0.0000
rangeKms2=0.000
latitude2=0.000000
longitude2=0.000000
agl2=0.000
description2_1=
description2_2=
url2=
band2_1=0
band2_2=0
band2_3=0
repeaterCall3=
repeaterBand3=
repeaterType3=0
repeaterAddress3=127.0.0.1
repeaterPort3=20013
reflector3=
atStartup3=0
reconnect3=0
frequency3=0.00000
offset3=0.0000
rangeKms3=0.000
latitude3=0.000000
longitude3=0.000000
agl3=0.000
description3_1=
description3_2=
url3=
band3_1=0
band3_2=0
band3_3=0
repeaterCall4=
repeaterBand4=
repeaterType4=0
repeaterAddress4=127.0.0.1
repeaterPort4=20014
reflector4=
atStartup4=0
reconnect4=0
frequency4=0.00000
offset4=0.0000
rangeKms4=0.000
latitude4=0.000000
longitude4=0.000000
agl4=0.000
description4_1=
description4_2=
url4=
band4_1=0
band4_2=0
band4_3=0
ircddbEnabled=1
ircddbHostname=rr.openquad.net
ircddbUsername=M0OUK
ircddbPassword=
ircddbEnabled2=0
ircddbHostname2=group1-irc.ircddb.net
ircddbUsername2=
ircddbPassword2=
ircddbEnabled3=0
ircddbHostname3=
ircddbUsername3=
ircddbPassword3=
ircddbEnabled4=0
ircddbHostname4=
ircddbUsername4=
ircddbPassword4=
aprsEnabled=1
aprsPassword=14500
aprsHostname=euro.aprs2.net
aprsPort=14580
dextraEnabled=1
dextraMaxDongles=5
dplusEnabled=1
dplusMaxDongles=5
dplusLogin=M0OUK
dcsEnabled=1
ccsEnabled=1
ccsHost=CCS706
xlxEnabled=0
xlxOverrideLocal=0
xlxHostsFileUrl=
starNetBand1=B
starNetCallsign1=
starNetLogoff1=
starNetInfo1=
starNetPermanent1=
starNetUserTimeout1=
starNetGroupTimeout1=
starNetCallsignSwitch1=1
starNetTXMsgSwitch1=1
starNetReflector1=
starNetBand2=B
starNetCallsign2=
starNetLogoff2=
starNetInfo2=
starNetPermanent2=
starNetUserTimeout2=
starNetGroupTimeout2=
starNetCallsignSwitch2=1
starNetTXMsgSwitch2=1
starNetReflector2=
starNetBand3=A
starNetCallsign3=
starNetLogoff3=
starNetInfo3=
starNetPermanent3=
starNetUserTimeout3=
starNetGroupTimeout3=
starNetCallsignSwitch3=0
starNetTXMsgSwitch3=1
starNetReflector3=
starNetBand4=A
starNetCallsign4=
starNetLogoff4=
starNetInfo4=
starNetPermanent4=
starNetUserTimeout4=
starNetGroupTimeout4=
starNetCallsignSwitch4=0
starNetTXMsgSwitch4=1
starNetReflector4=
starNetBand5=A
starNetCallsign5=
starNetLogoff5=
starNetInfo5=
starNetPermanent5=
starNetUserTimeout5=
starNetGroupTimeout5=
starNetCallsignSwitch5=0
starNetTXMsgSwitch5=1
starNetReflector5=
remoteEnabled=1
remotePassword=raspberry
remotePort=10022
language=0
infoEnabled=1
echoEnabled=1
logEnabled=1
dratsEnabled=1
dtmfEnabled=1
mobileGPSEnabled=0
mobileGPSAddress=127.0.0.1
mobileGPSPort=7834
windowX=-1
windowY=-1


Re: ASL_node_list.txt

Tom Corcoran
 

Got it. Tnx. will test after dinner. 


on a related point, the macros that are programmed by  the Configuration drop down cover 6 of the 10 items that I see on the Dialler macro drop down. Connect Parrot and Disconnect Parrot aren’t adjusted by the Configuration page. How can I access the Parrot Disconnect/Connect Parrot options? I’m using the Configuration macros to initiate ad hoc menus. This app is getting better and better. Tnx guys --

 Tom VE3NY


Re: ASL_node_list.txt

Steve N4IRS
 

root@omv:/opt/MMDVM_Bridge# ./dvswitch.sh collectProcessDataFiles
Processing NXDN
Processing P25
Processing DMR
Processing YSF
Processing DStar
Processing ASL
root@omv:/opt/MMDVM_Bridge# ls -la /tmp
-rw-r--r--  1 root     root       565 May 30 16:25 ABInfo_12345.json
-rw-r--r--  1 root     root       339 May 26 09:47 bm-cli.json
-rw-r--r--  1 root     root     27178 May 30 18:00 DMR_node_list.txt
-rw-r--r--  1 root     root       330 May 30 18:00 DSTAR_node_list.txt
-rw-------  1 root     root         4 May 25 07:24 ircDDB_Gateway
-rw-r--r--  1 root     root    533601 May 30 18:00 node_list.txt
-rw-r--r--  1 root     root      4209 May 30 18:00 NXDN_Hosts.txt
-rw-r--r--  1 root     root      2217 May 30 18:00 NXDN_node_list.txt
-rw-r--r--  1 root     root      5422 May 30 18:00 P25_Hosts.txt
-rw-r--r--  1 root     root      3346 May 30 18:00 P25_node_list.txt
-rw-r--r--  1 root     root     47341 May 30 18:00 TGList_BM.txt
-rw-------  1 root     root     35734 May 25 07:24 XLX_Hosts_4DvdtI
-rw-r--r--  1 root     root     65375 May 30 18:00 YSF_Hosts.txt
-rw-r--r--  1 root     root     27557 May 30 18:00 YSF_node_list.txt

The file you want is node_list.txt

Steve N4IRS


On 5/30/20 5:54 PM, Tom Corcoran wrote:
downloaded new dvswitch.sh … no longer getting error message regarding ASL … all nodes/lists get updated except I see no reference to ASL_node_list.txt file in /tmp directory. Is it stored somewhere else?
--
tnx .. Tom VE3NY


Re: ASL_node_list.txt

Tom Corcoran
 

downloaded new dvswitch.sh … no longer getting error message regarding ASL … all nodes/lists get updated except I see no reference to ASL_node_list.txt file in /tmp directory. Is it stored somewhere else?
--
tnx .. Tom VE3NY


Multiple FCS rooms bridging with one DVSwitch instance

David Young
 

I would like to bridge FCS rooms from 2 or more FCS servers using just one installed instance of the DVSwitch modules on a raspberry pi4.  Is this possible?  If so what would I need to modify or add?
 I am currently bridging one FCS server 4 room and would like to add a second, third and fourth room from different FCS servers to the bridge.
--
Dave WB6DTB


Re: ASL_node_list.txt

Steve N4IRS
 

I have updated dvswitch.sh on github.

On 5/30/20 2:22 PM, Mike Zingman - N4IRR wrote:
It appears that the ASL node list moved from its  old location in Feb, and I missed it.
I have changed the dvswitch.sh script, and when Steve merges the change, it will be available.


Re: ASL_node_list.txt

Mike Zingman - N4IRR
 

It appears that the ASL node list moved from its  old location in Feb, and I missed it.
I have changed the dvswitch.sh script, and when Steve merges the change, it will be available.


Re: ASL_node_list.txt

Tom Corcoran
 

Do I have to build my own file and pushfile to DVSM? If so, what’s the syntax for ASL modes?
--
Tom VE3NY


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge #mmdvm_bridge >> Intruder Problem #mmdvm_bridge

Uli
 

Hi Rudy,
I have done that and have setup  all ini files the same way you did but it does not work. I can hear others talking on the Brandmeister TG but when I talk into the DMR HT connected to this TG nothing to hear on the XLX Reflector side and when I talk into the HT connected to the XLX side nothing comes up on the DMR side.


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge #mmdvm_bridge >> Intruder Problem #mmdvm_bridge

Rudy N6DOZ
 
Edited

Steve suggested using BrandMeister SelfCare and placing a static TG to the DMRid (+SSid) that you use.

I ended up setting something like 313540499 (99 being the SSid) to be used for my purpose and placed the TG that it bridges to.


ASL_node_list.txt

Tom Corcoran
 

Where do I find the ASL_node_list.txt file? I would like to make some modifications but when I do the ./dvswitch.sh collectProcessDataFiles  command, it doesn't appear in /tmp and I get a "ASL node list is not valid, ignoring" message
tnx .. 
--
Tom VE3NY


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge #mmdvm_bridge >> Intruder Problem #mmdvm_bridge

Uli
 

Hello All,
A while ago, I have setup successfully two separate bridges one from BM to YSF and one from YSF to XLX. Worked fine for a while.

Now somebody connects every few minutes via a YSF Gateway from outside and starts to do brief connects like 5-10 within a few seconds shortly after my YSF Reflector is rebooted. For sure, that triggers the BM Loopban block and generates the dreaded "crkcrkcrk" Message that translates to "user blocked"
Instead of a Callsign it only shows NOCALL and the Callsign of the gateway it is coming from.

The idea now is to connect XLX direct to a BM TG and shut down the YSF Reflector alltogether. I have read the whole thread above but It´s not clear to me where I put the TG in that I want to connect to on BM.
I do not want to use DMRGateway, as Steve mentioned it can be done just with 2 MB instances. Where do I put the TG  (i assume somewhere in DVSwitch.ini??) and how can I check if I have the latest Version of MMDVM_Bridge installed (Steve mentioned earlier that there is a new Version that enables this connect between XLX and BM TG)

Any help is greatly appreciated
Uli


Re: Dashboard Installation php error on installation of 5 or 7

Tom Corcoran
 

NP. Just wondered if there was a different approach if using buster. Lots of other features that your team has developed to be explored - ad hoc menus for one, also like features of pyUC dashboard. 
--
Tom VE3NY


Re: Dashboard Installation php error on installation of 5 or 7

Steve N4IRS
 

The dashboard is a work in progress. It is on my ever expanding like of things to work on. It's a nice to have but not a priority. Same goes for a local display like Nextion.

Steve N4IRS

On 5/28/2020 7:16 AM, Tom Corcoran wrote:
Steve,
I am using Buster. My dashboard shows current tx only and no LH list. Is there a different install process?
--
Tom VE3NY


Re: Dashboard Installation php error on installation of 5 or 7

Tom Corcoran
 

Steve,
I am using Buster. My dashboard shows current tx only and no LH list. Is there a different install process?
--
Tom VE3NY


Re: Dashboard Installation php error on installation of 5 or 7

John K1IF
 

yep you're correct... , its a problem with Nextion not connecting after a reboot. When I burn a saved img it loads but when I reboot or shutdown and turn back on it doesn't load. I gotta work on that but the dashboard does load.

3301 - 3320 of 9775