Date   

Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Steve N4IRS
 

On 4/29/2020 10:25 AM, Uli wrote:
Ok, I´ll go another route that might be easier to do:
How do I Bridge a YSF Reflector to a XLX Reflector?
I have searched the forum to no avail.
Is there a detailed description existing, especially how the various .ini files should look like?


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

 

All you need to use is MMDVM_Bridge.


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Uli <g90@...>
Sent: Wednesday, April 29, 2020 3:25:11 PM
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)
 
Ok, I´ll go another route that might be easier to do:
How do I Bridge a YSF Reflector to a XLX Reflector?
I have searched the forum to no avail.
Is there a detailed description existing, especially how the various .ini files should look like?


Re: Is there a simple way for Bridging a YSF Reflector to an XLX Reflector (new 2020 Version)

Uli
 

Ok, I´ll go another route that might be easier to do:
How do I Bridge a YSF Reflector to a XLX Reflector?
I have searched the forum to no avail.
Is there a detailed description existing, especially how the various .ini files should look like?


Re: Allstarlink

Patrick Perdue
 

Unfortunately, I can’t really help, other than to ask if you are attempting this installation on Debian Buster. A friend recently ran into this, and ended up using stretch instead, because it just worked.


On Apr 29, 2020, at 01:06, Dexter Harroo <dex.9y4c@...> wrote:



[Edited Message Follows]

I have been doing some reading and tinkering and based on this i discovered that libcurl3 is missing from my install and is needed to get allstarlink going
allstarlink is dependent on asl-asterisk which is dependent on libcurl3
so in order to move forward i need to get libcurl3 installed then all should be good, but I am unable to get it to install as it has been replaced by libcurl4
can someone assist here, Steve can you help?


Re: #dmrlink Audio Quality Issues #dmrlink

Justin Grigg - KC2EQU
 

The analog connection from the repeater is a Repeater Builder RB-USB RIM to a Motorola CDM-750. 

Thank you for the gain settings, I will take a look and see if it sounds better. The audio did seem like it was coming into the node a little "hot".

Thank you both for the speedy reply! 

Justin


Re: #dmrlink Audio Quality Issues #dmrlink

Steve N4IRS
 

As Mike sais, you may be hot from analog to digital. Take a look at you Analog_Bridge.ini

[USRP]
tlvAudio = AUDIO_UNITY                  ; Analog -> Digital (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
tlvGain = 0.35                          ; Gain factor when tlvAudio = AUDIO_USE_GAIN (0.0 to 5.0) (1.0 = AUDIO_UNITY)


Change tlvAudio to AUDIO_USE_GAIN
Change tlvGain to .5
Restart Analog_Bridge and retest.
Adjust tlvGain to taste.

Steve N4IRS

On 4/28/20 8:48 PM, Mike KB8JNM wrote:

I guess there is lots more to know.

In your tests, what is the input to your ASL node, through USB radio interface, Local mic in computer, a asl linked station etc...

In the rough, it sounds like your ASL audio is hot.  Just because it sounds good on asl output does not mean it is correct on the input side.

So before you adjust anything, verify that part or you will be chasing your tail later.

On 4/28/2020 8:23 PM, jgrigg@... wrote:
Greetings Everyone! 
I have a DVSwitch instance spun up and running and am having some audio issues. 

DMR > Analog: Sounds Great
Analog > Allstar Node: Sounds Great
Analog > Allstar to >> DMR sounds really bad. 

The people could hear me but had a really hard time understanding what I was saying. Are there some settings changes I can make to help with this?

Thank you in advance! 

Justin 


Re: #dmrlink Audio Quality Issues #dmrlink

ve6gcd@...
 

Hi Justin,

What kind of audio fob are you using?

I am also having similar issues. However, I suspect there's something wrong with the audio fob I am using. This is because the audio of my IAX connection via DVSwitch mobile has excellent C4FM/DMR audio output.

Geoffrey VE6GCD 


Re: #dmrlink Audio Quality Issues #dmrlink

Mike KB8JNM
 

I guess there is lots more to know.

In your tests, what is the input to your ASL node, through USB radio interface, Local mic in computer, a asl linked station etc...

In the rough, it sounds like your ASL audio is hot.  Just because it sounds good on asl output does not mean it is correct on the input side.

So before you adjust anything, verify that part or you will be chasing your tail later.

On 4/28/2020 8:23 PM, jgrigg@... wrote:
Greetings Everyone! 
I have a DVSwitch instance spun up and running and am having some audio issues. 

DMR > Analog: Sounds Great
Analog > Allstar Node: Sounds Great
Analog > Allstar to >> DMR sounds really bad. 

The people could hear me but had a really hard time understanding what I was saying. Are there some settings changes I can make to help with this?

Thank you in advance! 

Justin 


Re: DVSwitch Installation

Justin Grigg - KC2EQU
 

Steve, 
I actually found that link late last night and was able to successfully install the DV Switch. 

Thank you for the speedy response!!

Have a great night, 
Justin 


#dmrlink Audio Quality Issues #dmrlink

Justin Grigg - KC2EQU
 

Greetings Everyone! 
I have a DVSwitch instance spun up and running and am having some audio issues. 

DMR > Analog: Sounds Great
Analog > Allstar Node: Sounds Great
Analog > Allstar to >> DMR sounds really bad. 

The people could hear me but had a really hard time understanding what I was saying. Are there some settings changes I can make to help with this?

Thank you in advance! 

Justin 


Re: Allstarlink

Justin Grigg - KC2EQU
 

Dexter, 
Are you attempting to build the Allstar node from scratch, or are you using the pre-configured Allstar distributions?

Stay well, 
Justin


Re: DVSwitch Installation

Steve N4IRS
 

Are you running as root?
I don't know what several websites are telling you, this is the install instructions <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit>

Steve N4IRS

On 4/27/20 9:43 PM, jgrigg@... wrote:
Hello! I am in the process of trying to create a DVSwitch Digital > Allstar node. I am working on the installation process and it keeps failing. I am following instructions from several websites and they all layout the same process. Am I missing something? Has the process changed? 

I have attached a screenshot of the error I am receiving. 

Any help would be greatly appreciated!! 

Have a great day, 
Justin 




DVSwitch Installation

Justin Grigg - KC2EQU
 

Hello! I am in the process of trying to create a DVSwitch Digital > Allstar node. I am working on the installation process and it keeps failing. I am following instructions from several websites and they all layout the same process. Am I missing something? Has the process changed? 

I have attached a screenshot of the error I am receiving. 

Any help would be greatly appreciated!! 

Have a great day, 
Justin 



Re: Is there a simple way for Bridging a Brandmeister TG to an XLX Reflector (new 2020 Version)

Eric-K6KWB
 

I hit reply to quick lol, we use TG6 once we connected on XLX reflector on pistar.


Re: Is there a simple way for Bridging a Brandmeister TG to an XLX Reflector (new 2020 Version)

Eric-K6KWB
 

yes that is correct.


Re: Is there a simple way for Bridging a Brandmeister TG to an XLX Reflector (new 2020 Version)

Patrick Perdue
 

In the example of
bm tg <->MB_bm<->MB_xlx<->XLX ref
how would you direct to a specific BM talkgroup? Just assume TG9 and a static talkgroup on the BM self-care page?

On 4/27/2020 6:23 PM, Eric-K6KWB wrote:
Yes two instances of MMDVM_Bridge:

bm tg <->MB_bm<->MB_xlx<->XLX ref
Point first MB_BM to BM and second MB_XLX point to XLX reflector. On DVSwitch.ini cross DMR port.

If you want XLX <-> YSF you can do the same as you mentioned one instance of MB in another project which I prefer. 

73,Eric


Re: Is there a simple way for Bridging a Brandmeister TG to an XLX Reflector (new 2020 Version)

Eric-K6KWB
 

Yes two instances of MMDVM_Bridge:

bm tg <->MB_bm<->MB_xlx<->XLX ref
Point first MB_BM to BM and second MB_XLX point to XLX reflector. On DVSwitch.ini cross DMR port.

If you want XLX <-> YSF you can do the same as you mentioned one instance of MB in another project which I prefer. 

73,Eric


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

EA5GVK Joaquin
 


El lun., 27 abr. 2020 16:55, Eddie <edkq6k@...> escribió:
Ken,

Good morning, there is no download link from the website, you do the update from the menus. You do it the same way you upgraded from version 9.0 to 9.02.

Vy 73, Eddie-KQ6K 

On Mon, Apr 27, 2020 at 6:30 AM Ken Kayser <kxkayser@...> wrote:
I'm sure I'm just missing it but I can't find the download link for V9.1.  Thanks


Is there a simple way for Bridging a Brandmeister TG to an XLX Reflector (new 2020 Version)

Uli
 

"Simple" question:
How do I bridge a BM Talkgroup to an XLX Reflector. Do I really need 2 instances of MMDVM_Bridge? How do MMDVM_Bridge.ini and DVSwitch.ini look like?
I have successfully bridged a YSF Reflector with one instance of DVSwitch/MMDVM_Bridge to a BM Talkgroup in another project.
Is there a similar way to do this with my XLX Reflector running the new 2020 version?
The XLX Reflector works fine with C4FM and D-Star (using Ambe Server), connecting to DMR XLX via TG6 works fine too.
Now I want to make it easy to our DMR users here so that they just can work with the local TG they are used to.

thanks for any advice


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Eddie
 

Ken,

Good morning, there is no download link from the website, you do the update from the menus. You do it the same way you upgraded from version 9.0 to 9.02.

Vy 73, Eddie-KQ6K 

On Mon, Apr 27, 2020 at 6:30 AM Ken Kayser <kxkayser@...> wrote:
I'm sure I'm just missing it but I can't find the download link for V9.1.  Thanks

3321 - 3340 of 9520