Date   

First release of USRP Client (pyUC)

Steve N4IRS
 

See the announcement in the Mobile subgroup:

https://dvswitch.groups.io/g/Mobile/message/1038


Re: Soon we will have Uspr Client to use it in Windows?

Steve N4IRS
 

Soon is now.
<https://dvswitch.groups.io/g/Mobile/message/1038>


Re: Updated DVSwitch repository available

JJ Cummings
 

Did you follow the instructions to do each thing.. ASL info here: https://wiki.allstarlink.org/wiki/ASL_FAQ


On Tue, Jan 14, 2020 at 8:26 AM Ken KE2N via Groups.Io <ke2n=cs.com@groups.io> wrote:
posting this here with this old message I guess it's unlikely I will get an answer.  Anyway, after sleeping on it, I decided I was doing this bass-ackwards.  What I should do is install the ASL image and then add the DVSwitch repository and programs to that - i,e,, reverse the order of installation.


Ken


Re: Updated DVSwitch repository available

Steve N4IRS
 

You are correct. It's much easier to add DVSwitch to a existing ASL node. See <https://docs.google.com/document/d/1eN50Csr29eAprBu7eKA0Bfa2XUcsXw5iktY1Ey-Qjkg/edit>

Steve N4IRS

On 1/14/2020 10:20 AM, Ken KE2N via Groups.Io wrote:
posting this here with this old message I guess it's unlikely I will get an answer.  Anyway, after sleeping on it, I decided I was doing this bass-ackwards.  What I should do is install the ASL image and then add the DVSwitch repository and programs to that - i,e,, reverse the order of installation.


Ken


Re: Updated DVSwitch repository available

Ken KE2N
 

posting this here with this old message I guess it's unlikely I will get an answer.  Anyway, after sleeping on it, I decided I was doing this bass-ackwards.  What I should do is install the ASL image and then add the DVSwitch repository and programs to that - i,e,, reverse the order of installation.


Ken


Re: #mmdvm_bridge dashboard #mmdvm_bridge

Steve N4IRS
 

Just a FYI:
The Dashboard is a "work in progress" It is on my todo list to "finish it"

"Software means never having to say you're finished" With apologies to Erich Segal


Steve N4IRS

On 1/14/2020 7:07 AM, W8DSB wrote:
So I am very new to DVSwitch, Started with a clean working HAMVOIP allstar on a RPI4 and then installed DVSwitch. Setup and enabled analog_bridge, mmdvm_bridge and md380-emu. It works, I can access the allstar menus, I have supermon running but the sound is only soso. I have a AMBE chip on order, shipped yesterday. In the mean time, I will start looking at the MMDVM dashboard.


Re: #mmdvm_bridge dashboard #mmdvm_bridge

W8DSB
 

So I am very new to DVSwitch, Started with a clean working HAMVOIP allstar on a RPI4 and then installed DVSwitch. Setup and enabled analog_bridge, mmdvm_bridge and md380-emu. It works, I can access the allstar menus, I have supermon running but the sound is only soso. I have a AMBE chip on order, shipped yesterday. In the mean time, I will start looking at the MMDVM dashboard.


Analog Bridge, Switching Modes Via Script and ASL

Ed W8VT
 

Got my bridge working fine on all modes now. Now trying to add some bells and whistles.
Have some scripts that I can call via ASL to change modes, set audio levels for that mode and announce over the ASL side the mode. Using dvswitch.sh mute TLV to prevent Allison on the digital side.
This works OK sometimes. Sometimes I get one way audio or a signal 15 exiting analog bridge. A AB restart fixes things. Doing a similar thing with KB8JNM's TG tune dial plan adding a TLV mute. Usually works OK but sometimes gets confused. Trying to use a wait or sleep to cover length of the audio file.
Is there a way to make the next command wait for the audio file from ASL to complete before running? Along the same lines think at times may be trying to execute a TG tune command before all the mode switching has completed. So in that case a wait until completed before starting next. Probably something using exit codes?
Little project has been fun and educational. Don't know much, but certainly more than when I started!
Any ideas or suggestions?

Ed W8VT


Re: #mmdvm_bridge dashboard #mmdvm_bridge

Diego
 

I used DVSwitch-System-Builder to install everything I needed, including the dshboard. Last night it started running well for a couple of hours, then everything went back to the way it was before, blank page.
It's a good idea to figure it out together.

73
IU2NAF
Diego


Re: #mmdvm_bridge dashboard #mmdvm_bridge

W8DSB
 

Sorry to hijack the tread but I didn't even know it had a dashboard...is there documentation. Maybe if I get mine running (MMDVM_Bridge to Analog_Bridge) we can figure it out together.


Re: Updated DVSwitch repository available

Ken KE2N
 

I would like to install DVSwitch and ASL on the same machine (Debian Stretch). I installed Debian and I followed the instructions in the referenced posting. I was successful in getting the dvswitch part installed (the programs are there anyway).  To install ASL, I found instructions in msg#139 about adding the allstarlink repo and doing apt-get allstarlink.  Which ran - but failed with a msg about allstarlink depends on asl-asterisk which is not going to be installed.... 

So what is the correct way to add ASL1.01 to the DVSwitch install?  ( Maybe something has changed in the last 18 months?)

Thanks
Ken
KE2N


#mmdvm_bridge dashboard #mmdvm_bridge

Diego
 

All,

I've successfully got MMDVM_Bridge/NXDNGateway configurating, works fine with a selected Reflector (TG2225) i've been testing. I've been trying to play with the MMDVM_Bridge dashboard but can't seem to get it to work, I see traffic on the dashboard for about 1sec after which the page updates and everything is deleted and i see a blank page.

73
IU2NAF
Diego


Re: Soon we will have Uspr Client to use it in Windows?

Mike Zingman - N4IRR
 

The new USRP Client app is in Python and uses tkinter for its user interface.  I have never tried to use it with a screen reader, so I do not know how it will work.  
I am excited to hear your results when it is released and hope to adjust any properties in the app to make it work better for the blind.
From my research, other have asked about tk and screen readers, and had not had good luck,, so this may be a significant development effort.

Mike N4IRR


Re: Soon we will have Uspr Client to use it in Windows?

Patrick Perdue
 

I'm certainly excited about this.

I've been using a SIP phone to connect to ASL, and thus, other modes from a Windows computer, with sub-optimal results. Also, I'm a totally blind screen reader user, and had some major problems with Zoiper, so I enabled and configured the SIP module and used something else.

It would be nice to talk directly to USRP from Windows. I assume this is how DVSwitch on Android works? I don't have an Android device, only iOS.


On 1/11/2020 10:54 AM, EA5GVK Joaquin wrote:
We are close to you giving us the USRP Client.
How exciting.



Moto firmware conflict? #dmrlink

ai6bx
 

I upgraded several Moto repeaters to 2.09.+ and may no be regretting it. Are any of you running this version and experiencing authentication issues post upgrade with dmrlink.py, confbridge.py, or IPSC_Bridge.py?


Soon we will have Uspr Client to use it in Windows?

EA5GVK Joaquin
 

We are close to you giving us the USRP Client.
How exciting.



Can work audio from Mic In or Inline Sound for USRPAudio.py with vox control and convert to DMR? #analog_bridge

EA5GVK Joaquin
 

Hi Steve and Group.io.
Can you help perform this process.

Mic In SoundCard or Inline -> USRPAudio.py (with vox control) -> Analog_Bridge -> md380_emu -> MMDVM_Bridge -> DMR.
To use it for example to broadcast news or any speech that we program on our website.
Or simply to pass our SdrSharp Audio for example to DMR.

If possible I would like you to explain to me please, how can I do the main part
MIC IN or IN LINE (SoundCard) -> USRPaudio.py with vox control -> Analog_Bridge

Any can help me?
Many thx.
73 EA5GVK.


Re: DVSwitch XLX C4FM (YSF)

Adrian Fewster <vk4tux@...>
 

All it does is auto connect a nominated module to the YSF client on first connect.

Without this feature you can connect to XLX (seen in repeaters/nodes) in limbo with no module allocated until a radio wires-x request is done to do so from the client system,

Once done, then in comms with that module and seen in users/modules.

On 11/1/20 7:48 am, Eric-K6KWB wrote:
Adrian,
Is this supposed to be enable all the time what ever the circumstances is? Or only for wires-x? Sorry guys I know its not a DVS question : )
#define YSF_AUTOLINK_ENABLE             1                                   // 1 = enable, 0 = disable auto-link
thanks, Eric


Re: DVSwitch XLX C4FM (YSF)

Eric-K6KWB
 

Adrian,
Is this supposed to be enable all the time what ever the circumstances is? Or only for wires-x? Sorry guys I know its not a DVS question : )
#define YSF_AUTOLINK_ENABLE             1                                   // 1 = enable, 0 = disable auto-link
thanks, Eric


Re: Hytera DMR Gateway

Adrian Fewster <vk4tux@...>
 

Try

sudo apt-get install libssl1.0.0 libssl-dev --reinstall


On 11/1/20 5:38 am, Kim-Benjamin Lütkemeier via Groups.Io wrote:
error while loading shared libraries: libcrypto.so.1.0.0: cannot open shared object file

3801 - 3820 of 9532