Date   
Re: Will Nextion Screen work with dvswitch?

John K1IF
 

sorry to be a pain...
 not sure Ive done this correctly.
I went to github and found the file MMDVM_Bridge.armhf I placed the file in /op/MMDVM_Bridge/  
I then renamed the MMDVM_Bridge to MMDVM_Bridge.OLD and renamed the armhf to MMDVM_Bridge

I tried with AMA0 after hooking up to GPIO
also with ttl to usb converter and changed to USB0 still getting nothing after rebooting each way,

thanks John

Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

No,
I have not pushed to apt yet.

On 5/23/20 4:54 PM, John K1IF via groups.io wrote:
can I just get by update and upgrade?


thanks John K1IF

Re: Will Nextion Screen work with dvswitch?

John K1IF
 

can I just get by update and upgrade?


thanks John K1IF

Re: Will Nextion Screen work with dvswitch?

Tom Corcoran
 
Edited

Amazing … worked first time … usually takes me a couple of loops around the block to make things work! I did add the Nextion and Nextion Driver stanzas to MMDVM_Bridge.ini Also used ttyUSB0
--
Tom VE3NY

Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

John,
I confirmed your finding this morning. We have enabled support for the serial displays including Nextion. Please be aware that you will only see traffic from the native networks, BM, P25 reflector etc. This will be changed as part of the changes for the dashboard.

I have pushed the armhf binary up to github.

73, Steve N4IRS

On 5/23/20 1:47 AM, John K1IF via groups.io wrote:
NO Joy here Steve, will be interesting to see what you find out.


cheers K1IF

Re: Will Nextion Screen work with dvswitch?

John K1IF
 

NO Joy here Steve, will be interesting to see what you find out.


cheers K1IF

Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

Then /dev/ttyUSB1 should be your port for the [Nextion] stanza

On 5/21/2020 2:09 PM, John K1IF via groups.io wrote:
sounds good Steve!
Oh I checked on my dvmega cast and i did see a stanza in my dvmega cast that is:
NextionDriver
Port
LogLevel
DataFilesPath
GroupsFile
DMRidFile
removeDim
SleepWhenInactive













Re: Will Nextion Screen work with dvswitch?

John K1IF
 

sounds good Steve!
Oh I checked on my dvmega cast and i did see a stanza in my dvmega cast that is:
NextionDriver
Port
LogLevel
DataFilesPath
GroupsFile
DMRidFile
removeDim
SleepWhenInactive












Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

I need to check my display on a working MMDVMHost system first. Once I'm sure the display is good, I'll look into using the display(s) with MMDVM_Bridge. Should know more this weekend.

Steve

On 5/21/2020 1:47 PM, John K1IF via groups.io wrote:
Hello Steve

Unfortunately, the display is not receiving any data from the pi. I am using a 3.5 enhanced (k) version. I am not sure how to load the driver for it. I did try both 2 and 3 for screen layout. I believe I need layout 3 but not sure how to get the driver loaded. Maybe that's why its not working for me? Maybe I can find a tft file for screenlevel 2

Re: Will Nextion Screen work with dvswitch?

John K1IF
 

Hello Steve

Unfortunately, the display is not receiving any data from the pi. I am using a 3.5 enhanced (k) version. I am not sure how to load the driver for it. I did try both 2 and 3 for screen layout. I believe I need layout 3 but not sure how to get the driver loaded. Maybe that's why its not working for me? Maybe I can find a tft file for screenlevel 2

Re: Will Nextion Screen work with dvswitch?

Steve N4IRS
 

As it happens, I was playing with this over the weekend. I have to make sure my display is good.
Changes to MMDVM_Bridge.ini

[General]
Display=Nextion

[Nextion]
Port=/dev/ttyAMA0
Brightness=50
DisplayClock=1
UTC=0
#Screen Layout: 0=G4KLX 2=ON7LDS
ScreenLayout=2
IdleBrightness=20

Set above port to match your system.
Please let me know what you get.
73, Steve N4IRS



On 5/21/2020 9:23 AM, John K1IF via groups.io wrote:
Just wondering if anyone has wired a nextion directly to rpi to get info sent to Nextion screen? If so what files would have to be modified if any?

I'm using rpi with dvsm as a stand alone way to access digi modes (not cross linked to asl (yet)





Thanks K1if John

Will Nextion Screen work with dvswitch?

John K1IF
 

Just wondering if anyone has wired a nextion directly to rpi to get info sent to Nextion screen? If so what files would have to be modified if any?

I'm using rpi with dvsm as a stand alone way to access digi modes (not cross linked to asl (yet)





Thanks K1if John

Re: Possible Loop in QSO DMR and MMDVM_Bridge or Analog_Bridge malfunction.

EA5GVK Joaquin
 

Steve, good afternoon.
We just updated analog_bridge binaries, mmdvm_bridge, also dvswitch.sh and dvswitch.ini and so far so good, we've been almost two days without problems so far.
I will report you any bugs.
Thank you very much for your dedication Steve. Great inspirer of digital radio. A hug.

Re: Updated DVSwitch repository available

francois xavier. humetz <francoisxavier.humetz@...>
 

Bonjour monsieur comment on fait le changement des port et tx port dans le ficher analog bridge.ini je veus mettre le port 46000 et 46001.....merci a vous urgent

Re: #analog_bridge #analog_bridge #analog_bridge

francois xavier. humetz <francoisxavier.humetz@...>
 

bonjour monsieur comment on faire pour changer les port dans le ficher analog bridge.ini..cordialement

Re: new install working but cannot get BM to TGIF to work

Steve N4IRS
 

John,
Happy to hear you got it working.

73, Steve N4IRS

On 5/18/20 5:14 PM, John K1IF via groups.io wrote:
went back over everything and found error in my script. it appears to be working now!! HURRY burn image 

Thanks for pointing me in correct path Steve !

73 John

Re: new install working but cannot get BM to TGIF to work

Tim Porter
 

Don't feel bad John I can't get it working either


On Mon, May 18, 2020, 5:14 PM John K1IF via groups.io <izzy_y2k=yahoo.com@groups.io> wrote:
went back over everything and found error in my script. it appears to be working now!! HURRY burn image 

Thanks for pointing me in correct path Steve !

73 John

Re: new install working but cannot get BM to TGIF to work

John K1IF
 

went back over everything and found error in my script. it appears to be working now!! HURRY burn image 

Thanks for pointing me in correct path Steve !

73 John

Re: new install working but cannot get BM to TGIF to work

John K1IF
 

I changed permissions to 777 on each .sh and now getting...
AB LOG
I: 2020-05-18 20:23:26.901 Tune macro: *14 will invoke "/opt/Analog_Bridge/TGIF_chng.sh"
I: 2020-05-18 20:23:27.263 rxport=: 30000
M: 2020-05-18 20:23:27.264 TLV rx socket reopened for 127.0.0.1:30000
I: 2020-05-18 20:23:28.549 MESSAGE packet sent to USRP client: Setting mode to DMR
I: 2020-05-18 20:23:28.621 ambeMode = DMR, size = 72
M: 2020-05-18 20:23:28.621 Connecting to DV3000 hardware......
M: 2020-05-18 20:23:28.633 Begin DV3000 decode
M: 2020-05-18 20:23:28.633 DV3000 latency is currently set to 1
I: 2020-05-18 20:23:28.688 txport=: 31103
I: 2020-05-18 20:23:28.759 rxport=: 31100
E: 2020-05-18 20:23:28.759 Can not bind port 31100, error code = 98 (Address already in use)
M: 2020-05-18 20:23:28.759 TLV rx socket reopened for 127.0.0.1:31100
I: 2020-05-18 20:23:31.383 Macro result was 0
I: 2020-05-18 20:24:15.123 txTg=: 4000
M: 2020-05-18 20:24:53.782 TLV tx socket re-opened for 127.0.0.1:415496
M: 2020-05-18 20:24:53.782 PTT on
M: 2020-05-18 20:24:56.197 Short transmission, extend hang time by 85 ms
M: 2020-05-18 20:24:56.317 PTT off (keyed for 2535 ms)
from command line:
cp:  missing destination file operand after /opt/MMDVM_Bridge/MMDVM_Bridge_TGIF.ini/optMMDVM_Bridge/MMDVM_Bridge.ini

Re: new install working but cannot get BM to TGIF to work

John K1IF
 

permission denied when ran from #