Date   

Multiple Dashboards

Jake Litwin
 

I have a YSF Reflector and dashboard all setup and working great. I just added a P25 Reflector to the same server. I would like to have a dashboard for P25. Is it possible to run 2 dashboards on the same server? I almost think the second one would have to be on different web port correct?


Re: ASL BeagleBone Black

Mike/W5JR
 

Too much multitasking....

Steve Z.....


tnx
Mike / W5JR
Alpharetta GA


On Oct 9, 2019, at 11:30 AM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Mike Z, I did reimage, but no change. I also tried a few other perturbations without success. 

No urgency/deadline on getting this going. Let me know when you get a chance to look at it once you’re settled in. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 7:06 PM, Steve N4IRS <szingman@...> wrote:

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/W5JR
 

Mike Z, I did reimage, but no change. I also tried a few other perturbations without success. 

No urgency/deadline on getting this going. Let me know when you get a chance to look at it once you’re settled in. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 7:06 PM, Steve N4IRS <szingman@...> wrote:

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV


Re: MMDVM_BRIDGE

Chris K7AZ
 

Yes, that sounds plausible.    I was transcoding the Monday evening GoldCoastNet.com and I'll have to remind them not to quick key.  Odd it works fine other weeks.   

Thank you,
Chris K7AZ 



Sent from my Verizon, Samsung Galaxy smartphone

-------- Original message --------
From: "Russell, KV4S" <russelljthomas@...>
Date: 10/8/19 12:24 (GMT-08:00)
To: main@dvswitch.groups.io
Subject: Re: [DVSwitch] MMDVM_BRIDGE

sounds like you got you dmr id blocked by keying up to close together. do not use it for an hour and it should unlock.

also you may want to set min TX to 2500 in analog_bridge to help with that.

On Tue, Oct 8, 2019 at 2:21 PM Chris K7AZ via Groups.Io <kilo7alphazulu=verizon.net@groups.io> wrote:


Has anyone heard of a voice saying "blocked" related to transcoding DMR to ASL?
Typically its heard on the ASL side and 1-2 seconds after ASL source unkeys.   

Thank you in advance for any help debugging this issue.  

Chris K7AZ 

Sent from my Verizon, Samsung Galaxy smartphone


Re: ASL BeagleBone Black

Steve N4IRS
 

Yep, that's what I wrote.

On 10/8/19 6:43 PM, Mike/W5JR wrote:
Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


--
Steve Miller
KC1AWV


--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/W5JR
 

Oops, error in the URL. Use this one. 



tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:30 PM, Mike/W5JR via Groups.Io <w5jr.lists@...> wrote:

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

dvswitch.org/files/ASL_Images/BeagleBoard/Beagle_Board_Black/


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/W5JR
 

Thanks, Steve. I’m likely to reimage the SD card. I had the unit powered up for a few weeks anticipating connecting to it  and change the SSH port. It’s entirely possible “someone” beat me to it, ha. It’s been unplugged for about a month and I just got back to powering it up to work with it. 

Good luck with the move. 

tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 6:33 PM, Steve N4IRS <szingman@...> wrote:

Mike,
You are correct on what SHOULD be the login and password. I built that image over a year ago so I'm a bit fuzzy. My BBB is packed up for a move so I can't test it here. I know Mike also has a BBB so if he can find it maybe he can test. As soon as I have a desk again (next week) I'll give it a try.

Sorry I can't be of more help right now.

Steve N4IRS

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Mike/W5JR <w5jr.lists@...>
Sent: Tuesday, October 8, 2019 5:37:04 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] ASL BeagleBone Black
 
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Steve N4IRS
 

Mike,
You are correct on what SHOULD be the login and password. I built that image over a year ago so I'm a bit fuzzy. My BBB is packed up for a move so I can't test it here. I know Mike also has a BBB so if he can find it maybe he can test. As soon as I have a desk again (next week) I'll give it a try.

Sorry I can't be of more help right now.

Steve N4IRS

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Mike/W5JR <w5jr.lists@...>
Sent: Tuesday, October 8, 2019 5:37:04 PM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] ASL BeagleBone Black
 
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/W5JR
 

Hi, Steve. 

The bbb version I’m inquiring about is *not* the hv bbb. This is the one the other Steve, N4IRS, put on the ASL_Images on the dvswitch site. 

On Oct 8, 2019, at 5:50 PM, Steve KC1AWV <smiller@...> wrote:

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.

On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Steve KC1AWV
 

> The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions.
Then, either the README is incorrect, or the image is incorrect. I'd ask whoever wrote the README in that case.

> I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years.
Which ASL version do you mean? And as far as I can see, then last update to HamVOIP was on August 22, 2019 for the RPi 4.

HamVOIP has a release called Final Version (1.2.2) located here: https://www2.hamvoip.org/BBB/BBB_Allstar_V1.2.2.img.zip

Hope this helps.


On Tue, Oct 8, 2019 at 5:37 PM Mike/W5JR <w5jr.lists@...> wrote:
Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Mike/W5JR
 

Nope, the ASL_1.01-20180228-armhf-bbb-strech-image.img. The accompanying readme file says user:repeater, pw:allstarlink, consistent with other ASL rpi versions. 

I do have a couple of the early hamvoip bbb units operating (pre rpi) and wish to migrate them over to ASL. Yes, they are “root”. 

I realize that little, if any, development is taking place on the ASL version. And absolutely *zero* development has taken place on the hv version in years. 


tnx
Mike / W5JR
Alpharetta GA


On Oct 8, 2019, at 5:09 PM, Steve KC1AWV <smiller@...> wrote:

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.

On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV


Re: ASL BeagleBone Black

Steve KC1AWV
 

A quick Google search for Beaglebone Black AllStarLink provided a document with this information:

The login username is root and the PW is root

I also assume this is the hamvoip distribution? If so, you may get better help from the hamvoip folks.


On Tue, Oct 8, 2019 at 4:27 PM Mike/W5JR <w5jr.lists@...> wrote:
I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA



--
Steve Miller
KC1AWV


ASL BeagleBone Black

Mike/W5JR
 

I’ve finally gotten around to making an SD card for the BBB ASL image. I’m trying to log into the unit for the first time with this SD card. I’m connected to it via ssh port 22 just fine and it appears to accept the “repeater” user name. Entering the password specified in the readme file of “allstarlink” isn’t working. I’ve tried some capitalization perturbations, but no joy. Is there a different pw? Reimage the SD card? Looking for ideas. 

Tnx
Mike/W5JR
Alpharetta GA


Re: MMDVM_BRIDGE

 

sounds like you got you dmr id blocked by keying up to close together. do not use it for an hour and it should unlock.

also you may want to set min TX to 2500 in analog_bridge to help with that.

On Tue, Oct 8, 2019 at 2:21 PM Chris K7AZ via Groups.Io <kilo7alphazulu=verizon.net@groups.io> wrote:


Has anyone heard of a voice saying "blocked" related to transcoding DMR to ASL?
Typically its heard on the ASL side and 1-2 seconds after ASL source unkeys.   

Thank you in advance for any help debugging this issue.  

Chris K7AZ 

Sent from my Verizon, Samsung Galaxy smartphone


MMDVM_BRIDGE

Chris K7AZ
 



Has anyone heard of a voice saying "blocked" related to transcoding DMR to ASL?
Typically its heard on the ASL side and 1-2 seconds after ASL source unkeys.   

Thank you in advance for any help debugging this issue.  

Chris K7AZ 

Sent from my Verizon, Samsung Galaxy smartphone


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Tom Corcoran
 

Hello EA5GVK Joaquin,

can you explain what I am looking at on the desktop??


--
Tom VE3NY


test

Pierre Martel
 

Just making a test


Re: USRP connection on the Windows IAXRPT client?

Steve N4IRS
 

There will be a Windows (Python3) USRP client.

Sent by smoke signal (AT&T)


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Steve KC1AWV <smiller@...>
Sent: Monday, October 7, 2019 11:54:50 AM
To: main@dvswitch.groups.io <main@dvswitch.groups.io>
Subject: Re: [DVSwitch] USRP connection on the Windows IAXRPT client?
 
If you're talking the Xelatec (xipar) IAXRPT dispatch console, I don't think so. It's closed source as well, so a separate Windows client would be needed to build in the USRP functions I believe.

On Mon, Oct 7, 2019 at 11:38 AM Russell, KV4S <russelljthomas@...> wrote:
This may not be available but does anyone know if you can configure the Windows client to talk to USRP?



--
Steve Miller
KC1AWV


Re: USRP connection on the Windows IAXRPT client?

Steve KC1AWV
 

If you're talking the Xelatec (xipar) IAXRPT dispatch console, I don't think so. It's closed source as well, so a separate Windows client would be needed to build in the USRP functions I believe.

On Mon, Oct 7, 2019 at 11:38 AM Russell, KV4S <russelljthomas@...> wrote:
This may not be available but does anyone know if you can configure the Windows client to talk to USRP?



--
Steve Miller
KC1AWV


USRP connection on the Windows IAXRPT client?

 

This may not be available but does anyone know if you can configure the Windows client to talk to USRP?

4661 - 4680 of 9595