Date   

Re: Fusion node lists and tune string

Steve N4IRS
 

Did you restart mmdvm_bridge?

On 4/21/2021 2:11 PM, G4WXN@... wrote:

I added the remote port details to each stanza in DVSwitch.ini. I assumed that was right.

However still not getting anywhere with YSF.

Latest log file attached.


--
Derek

G4WXN



Re: Fusion node lists and tune string

G4WXN@...
 

I added the remote port details to each stanza in DVSwitch.ini. I assumed that was right.

However still not getting anywhere with YSF.

Latest log file attached.


--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

OK, So, in the interest of safety add these to your DVSwitch.ini

[DSTAR]
RemotePort = 54321        ; Port to send Gateway commands to

[NXDN]
RemotePort = 6075        ; Port to send Gateway commands to

[P25]
RemotePort = 6074        ; Port to send Gateway commands to

[YSF]
RemotePort = 6073        ; Port to send Gateway commands to


Then restart MMDVM_Bridge and retest.

Steve


On 4/21/2021 10:16 AM, G4WXN@... wrote:
Output of command Below.

/opt/MMDVM_Bridge/dvswitch.sh version all
dvswitch.sh version 1.6.1
Analog_Bridge version 1.6.1
MMDVM_Bridge version 20210223_V1.6.3 git #bb741c3
P25Gateway version 20200824
NXDNGateway version 20200824
YSFGateway version 20200908
 

On Wed, Apr 21, 2021 at 03:00 PM, Steve N4IRS wrote:
/opt/MMDVM_Bridge/dvswitch version all

 
--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

Output of command Below.

/opt/MMDVM_Bridge/dvswitch.sh version all
dvswitch.sh version 1.6.1
Analog_Bridge version 1.6.1
MMDVM_Bridge version 20210223_V1.6.3 git #bb741c3
P25Gateway version 20200824
NXDNGateway version 20200824
YSFGateway version 20200908
 

On Wed, Apr 21, 2021 at 03:00 PM, Steve N4IRS wrote:
/opt/MMDVM_Bridge/dvswitch version all

 
--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

No you do not.
Is your system up to date?
You don't have any of the remote control ports in your DVSwitch.ini

Please show the output of:
/opt/MMDVM_Bridge/dvswitch version all

Steve

On 4/21/2021 9:56 AM, G4WXN@... wrote:
File attached.

This may sound like a stupid question, but it just occurred to me-
Do I need to register somewhere for YSF?

--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

File attached.

This may sound like a stupid question, but it just occurred to me-
Do I need to register somewhere for YSF?

--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

I do not see an attempt to dial 857727
Please include your DVSwitch.ini

Steve

On 4/21/2021 9:39 AM, G4WXN@... wrote:
As always thanks for your help with this.

Log file attached.

I have tried this from the dialer and from a script I call to use YSF, the output results are the same


On Tue, Apr 20, 2021 at 07:51 PM, Steve N4IRS wrote:
857727

 
--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

As always thanks for your help with this.

Log file attached.

I have tried this from the dialer and from a script I call to use YSF, the output results are the same


On Tue, Apr 20, 2021 at 07:51 PM, Steve N4IRS wrote:
857727

 
--
Derek

G4WXN


Re: P25 Reflector blacklist

Desertman
 
Edited

Thanks for all the relpies gents.

Jeff, the goal is not to have to disconnect the P25 node. That takes P25 away from other users.

Skyler, I hope he gets the hint and just leaves.

Mike, we thought about that but then we would be blocking folks that we would want to talk to .

73
Ted


Re: Fusion node lists and tune string

Steve N4IRS
 

Show me the YSFGateway log when you dial 857727

On 4/20/2021 2:39 PM, G4WXN@... wrote:

Added those lines to YSFGW and rebooted, but sadly no change. Using the reflector number gets me nowhere.

However I have succeeded in connecting to Hubnet, if I use the IP address and port number, but the reflector number doesn't work.

Think I must be missing something.
--
Derek

G4WXN



Re: Fusion node lists and tune string

G4WXN@...
 

Added those lines to YSFGW and rebooted, but sadly no change. Using the reflector number gets me nowhere.

However I have succeeded in connecting to Hubnet, if I use the IP address and port number, but the reflector number doesn't work.

Think I must be missing something.
--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

I see this line in the YSFGW log

The ID of this repeater is 00000
is there any significance to this?


On Tue, Apr 20, 2021 at 06:12 PM, Steve N4IRS wrote:
[Remote Commands]
Enable=1
Port=6073

 
--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

I don't think it will matter, but add this to bottom of YSFGateway.ini

[Remote Commands]
Enable=1
Port=6073

restart YSFGateway.
retest

Steve

On 4/20/2021 1:04 PM, G4WXN@... wrote:
Yes mode is YSF.

Although the tune command appears to work, it's not connecting as far as I can tell.

I have attached the YSFGW ini file and the log file.

My guess I am doing something stupid
--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

Yes mode is YSF.

Although the tune command appears to work, it's not connecting as far as I can tell.

I have attached the YSFGW ini file and the log file.

My guess I am doing something stupid
--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

Yes, if it's a YSF reflector, precede with an 8. If it's a FCS room precede with a 9.
Make sure you are in the proper mode:
./dvswitch.sh mode YSF
./dvswitch.sh tune 841729

On 4/20/2021 12:18 PM, G4WXN@... wrote:
Thanks for the reply.

Doing some trawling of previous posts, as I understand it, to connect to a YSF reflector I use the dvs tune string with the reflector ID number and add an 8 infront.

So CQ-UK 1 is 41729, so my tune string should be

/dvswitch.sh tune 841729

have I got that right?


--
Derek

G4WXN


Re: Fusion node lists and tune string

G4WXN@...
 

Thanks for the reply.

Doing some trawling of previous posts, as I understand it, to connect to a YSF reflector I use the dvs tune string with the reflector ID number and add an 8 infront.

So CQ-UK 1 is 41729, so my tune string should be

/dvswitch.sh tune 841729

have I got that right?


--
Derek

G4WXN


Re: Fusion node lists and tune string

Steve N4IRS
 

Derek,
You can connect to YSF reflectors and FCS rooms. You can not connect to wires-x rooms. Same as you can not connect to a wires-x room from a hotspot.

Steve N4IRS

On 4/20/2021 5:45 AM, G4WXN@... wrote:

What is the format of the tune string for YSF.

I am also wondering how I interpret what I find https://www.yaesu.com/jp/en/wires-x/id/active_room.php

Into a YSF node list.

I wanted to link up to CQ_UK_1 2 and 3, but these don't show in the default YSF node list.

Thanks in advance

--
Derek

G4WXN



Re: P25 Reflector blacklist

Mike AE4ML
 

One of my sites is the local hospital. I utilize their internet connection. They use Geo-location on their firewalls so  no one outside of the US can access the network.


Fusion node lists and tune string

G4WXN@...
 

What is the format of the tune string for YSF.

I am also wondering how I interpret what I find https://www.yaesu.com/jp/en/wires-x/id/active_room.php

Into a YSF node list.

I wanted to link up to CQ_UK_1 2 and 3, but these don't show in the default YSF node list.

Thanks in advance

--
Derek

G4WXN


Re: P25 Reflector blacklist

Skyler Fennell
 

On Mon, Apr 19, 2021 at 3:00 PM Desertman <desertmansd@...> wrote:
Ideally not that way I want to do things as people find ways around IP) blocks.

It's just as easy to enter a new random Radio ID in as it is get a new IP address, i'm sure if you block him by radio ID, he will probably just take on a new one.
 

661 - 680 of 9775