Date   

Re: banned DVSwitch

Steve N4IRS
 

No, you do not. For now, just check the MMDVM_Bridge.ini file
This is the default:
[Info]
RXFrequency=222340000
TXFrequency=224940000

Change it to:
[Info]
RXFrequency=224940000
TXFrequency=224940000

In other words, Make it a simplex frequency.

Steve N4IRS


On 2/9/2021 2:50 PM, G4WXN@... wrote:

I only use DVSwitch as a pseudo hotspot, with the DVSM app.

So do I even need openbridge?
 
--
Derek

G4WXN



Re: banned DVSwitch

G4WXN@...
 

I only use DVSwitch as a pseudo hotspot, with the DVSM app.

So do I even need openbridge?
 
--
Derek

G4WXN


Re: banned DVSwitch

Steve N4IRS
 

There are a LOT of politics in the discussion of OpenBridge vs HB (MMDVM) I can tell you when we worked with Cort on the Python implementation, it was envisioned as a mult-TG bridge solution. BM has always had a problem with HB. I really don't see a issue with a single reflector mode (P25, NXDN, YSF, ASL) using HB to connect to a Master. It is BM's sandbox and that's the way they want it. As of today, DVSwitch does not support OB nor the BM preferred connection from a Mobile device. In the case of Mobile that may be changing as we complete Simple Terminal Feature Update.

For OpenBridge, I suggest people wanting to bridge to BM start reading up on OB. Unlike HB, OB requires you coordinate with the Master to setup your connection. If that Master goes down you can not just move to a different Master. Before I start getting a bunch of flack about why move to OB, I'll say it again, it's BM's sandbox.

Steve N4IRS 

On 2/9/2021 2:29 PM, Peter M0NWI wrote:
Have a Google, it's the network to network protocol, which you can pass concurrent channels of TGs down then split them out using the confbridge rules at you network end.  It's quite efficient and the right way to link. 


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: 09 February 2021 19:18
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] banned DVSwitch
 
What's openbridge?

--
Derek

G4WXN


Re: banned DVSwitch

Peter M0NWI
 

Have a Google, it's the network to network protocol, which you can pass concurrent channels of TGs down then split them out using the confbridge rules at you network end.  It's quite efficient and the right way to link. 


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of G4WXN@... <G4WXN@...>
Sent: 09 February 2021 19:18
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: Re: [DVSwitch] banned DVSwitch
 
What's openbridge?

--
Derek

G4WXN


Re: banned DVSwitch

G4WXN@...
 

What's openbridge?

--
Derek

G4WXN


Re: Brandmeister block DVSwitch

Peter M0NWI
 

Why are you not using Open Bridge then? I'm sure Cort built this into HBLink3?


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of ruediger.h@... <ruediger.h@...>
Sent: 09 February 2021 06:42
To: main@DVSwitch.groups.io <main@DVSwitch.groups.io>
Subject: [DVSwitch] Brandmeister block DVSwitch
 
Hi there.
Since Yesterday, my DWSwitch is disabled from Brandmeister (master1.bm262.de)
Brandmeister Team is missing the Open Bridge Protocoll and cut off all DVSWitches as long DVSwitch is not support the Open Bridge Protocoll

Is there any solution planned to implement that Protocol ?


Re: banned DVSwitch

G4WXN@...
 

Mine appears to be working fine.

--
Derek

G4WXN


Re: banned DVSwitch

Steve N4IRS
 

Check your MMDVM_Bridge.ini

[Info]
RXFrequency=222340000
TXFrequency=224940000

Change to:
[Info]
RXFrequency=224940000
TXFrequency=224940000

Or, make sure your frequencies are the same (simplex)

Steve N4IRS

On 2/9/2021 7:50 AM, Wolfgang DK5UF wrote:
Hi folks,
please find enclosed a link to a  yesterdays Brandmeister news. According to
this news, my Dvswitch has been disabled yesterday. Are there
any thoughts to solve the problem  ?
vy 73 + 55s from Wolfgang, DK5UF
http://bm262.de/dmr-programme-fuer-handy-und-pc-wilde-links/


Re: banned DVSwitch

JJ Cummings
 

Were you using OpenBridge, had you coordinated a connection to Brandmeister and setup the OpenBridge connection with them, mapping the TGs that you wanted to be carried over the OpenBridge connection?  If this is not what you did, then that's why you were disconnected.

There are numerous conversations about this and information even on the BM site itself stating that you must use OpenBridge...

JJC

On Tue, Feb 9, 2021 at 10:44 AM Wolfgang DK5UF <worit@...> wrote:
Hi folks,
please find enclosed a link to a  yesterdays Brandmeister news. According to
this news, my Dvswitch has been disabled yesterday. Are there
any thoughts to solve the problem  ?
vy 73 + 55s from Wolfgang, DK5UF
http://bm262.de/dmr-programme-fuer-handy-und-pc-wilde-links/


banned DVSwitch

Wolfgang DK5UF
 

Hi folks,
please find enclosed a link to a  yesterdays Brandmeister news. According to
this news, my Dvswitch has been disabled yesterday. Are there
any thoughts to solve the problem  ?
vy 73 + 55s from Wolfgang, DK5UF
http://bm262.de/dmr-programme-fuer-handy-und-pc-wilde-links/


Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Steve N4IRS
 

Check your MMDVM_Bridge.ini

[Info]
RXFrequency=222340000
TXFrequency=224940000

Change to:
[Info]
RXFrequency=224940000
TXFrequency=224940000

Or, make sure your frequencies are the same (simplex)

Steve N4IRS

On 2/9/2021 9:06 AM, Uli wrote:
My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.



Re: Brandmeister block DVSwitch

R. H.
 

BM Team want that the open bridge protocoll will be implemeted in DVSwitch.
Otherwise they leave the door closed


Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Kevin Halton
 

Yup mine as well. 


On Feb 9, 2021, at 10:03 AM, Brad N8PC <bradn8pc@...> wrote:

 mine still works

On 2/9/2021 9:06 AM, Uli wrote:
My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.



Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Brad N8PC
 

mine still works

On 2/9/2021 9:06 AM, Uli wrote:
My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.



Re: Brandmeister block DVSwitch

Pierre Martel
 

Just ask them to make an open bridge connection available to you. 


Le mar. 9 févr. 2021 à 01:42, <ruediger.h@...> a écrit :
Hi there.
Since Yesterday, my DWSwitch is disabled from Brandmeister (master1.bm262.de)
Brandmeister Team is missing the Open Bridge Protocoll and cut off all DVSWitches as long DVSwitch is not support the Open Bridge Protocoll

Is there any solution planned to implement that Protocol ?


Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Mike KB8JNM
 

Have you changed from the default password for your dmr log-in to BM ?.

passw0rd no longer valid

On 2/9/2021 9:06 AM, Uli wrote:
My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.


Re: Setup of a Bridge YSF to DMR - Anyone out there who can solve this mystery ? #mmdvm_bridge

Uli
 

My bridge did work perfectly for quite a while but now does not function anymore because a few days ago Brandmeister here had the bright idea to block all DVswitch systems from their network that connect to a BM Talkgroup.


Brandmeister block DVSwitch

R. H.
 

Hi there.
Since Yesterday, my DWSwitch is disabled from Brandmeister (master1.bm262.de)
Brandmeister Team is missing the Open Bridge Protocoll and cut off all DVSWitches as long DVSwitch is not support the Open Bridge Protocoll

Is there any solution planned to implement that Protocol ?


Re: DVSwitch dashboard RX Monitor audio

David Young
 

Steve,

That did the trick.

Thanks again!
--
Dave WB6DTB


Re: DVSwitch dashboard RX Monitor audio

Steve N4IRS
 

If I had to guess, I would say you reused a older Analog_bridge.ini

Add pcmPort = 2222

emulatorAddress = 127.0.0.1:2470        ; IP address and port of the md380 server

pcmPort = 2222                          ; UDP port to send to the WebProxy

; Information for xx_Bridge (Where xx is MMDVM, Quantar, HB, IPSC)
[AMBE_AUDIO]



On 2/8/21 8:24 PM, David Young wrote:
Don't think my previous post reply went through so sending Analog_Bridge.ini again.
--
Dave WB6DTB

701 - 720 of 9149