Date   

HBBridge setting up more then one link between the two

KB5PBM
 

Currently I have IPSC_Bridge configured as below.  And two masters configured in dmrlink.cfg master 1 and 2.  IPSC_Bridge works fine.  However when I try the same with HBBridge i get an error.  Is HBBridge able to do the same?  To get around this I am running two instances of HBBridge. Needed more timeslots to my C-bridge.  Its over kill I know.  But easier to exec at startup.

[DEFAULTS]
gateway = 127.0.0.1                             # IP address of Partner Application (HB_Bridge, Analog_Bridge)
fromGatewayPort = 34100                         # Port IPSC_Bridge is listening on for data  (IPSC_Bridge <--- Partner)
toGatewayPort = 34103                           # Port Partner is listening on for data  (IPSC_Bridge ---> Partner)

[MASTER]
gateway = 127.0.0.1                             # IP address of Partner Application (HB_Bridge, Analog_Bridge)
fromGatewayPort = 39400                         # Port IPSC_Bridge is listening on for data  (IPSC_Bridge <--- Partner)
toGatewayPort = 39403                           # Port Partner is listening on for data  (IPSC_Bridge ---> Partner)

[MASTER1]
gateway = 127.0.0.1                             # IP address of Partner Application (HB_Bridge, Analog_Bridge)
fromGatewayPort = 39100                         # Port IPSC_Bridge is listening on for data  (IPSC_Bridge <--- Partner)
toGatewayPort = 39103                           # Port Partner is listening on for data  (IPSC_Bridge ---> Partner)


Re: Analog_Bridge gain

 

I had the same issue I went to positive 10 or 15 with another station listening and that seemed right to us. Your milage could vary. Acg gain for to ASL. Set the other to use acg.

Unity means no adjustment I believe.

On Sun, Aug 12, 2018, 1:47 PM Dennis Ramos <m0tfg@...> wrote:
hello guys, i just wonder if you can help me to increase my dmr audio going to allstarlink. it is a little bit low.

my existing setting are this; default

[USRP]
server = 127.0.0.1                      ; IP address of Allstar/Asterisk
toASLPort = 32001                       ; Analog_Bridge <-- ASL
fromASLPort = 34001                     ; Analog_Bridge --> ASL
aslAudio = AUDIO_UNITY                  ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
agcGain = -20                           ; Gain (in db) of the AGC filter
dmrAudio = AUDIO_UNITY                  ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
dmrGain = 0.35                          ; Gain factor of audio from ASL (0.0-1.0)


actually i would like to understand those unity, use agc and use gain setting, and the gain levels in db. what are those for.

many thanks in advance

de dennis/m0tfg


Re: Analog_Bridge gain

mark rosenberg
 

hey Dennis...use your dmr radio to connect to my ASL - DMR bridge so I can hear your audio DMR on my Allstar node...or I guess you can connect your Allstar node and use you bridge to talk to your node while you are connected to me.  My bridge TG is 42555.

Mark

On Sun, Aug 12, 2018 at 9:47 PM, Dennis Ramos <m0tfg@...> wrote:
hello guys, i just wonder if you can help me to increase my dmr audio going to allstarlink. it is a little bit low.

my existing setting are this; default

[USRP]
server = 127.0.0.1                      ; IP address of Allstar/Asterisk
toASLPort = 32001                       ; Analog_Bridge <-- ASL
fromASLPort = 34001                     ; Analog_Bridge --> ASL
aslAudio = AUDIO_UNITY                  ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
agcGain = -20                           ; Gain (in db) of the AGC filter
dmrAudio = AUDIO_UNITY                  ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
dmrGain = 0.35                          ; Gain factor of audio from ASL (0.0-1.0)


actually i would like to understand those unity, use agc and use gain setting, and the gain levels in db. what are those for.

many thanks in advance

de dennis/m0tfg



Re: Analog_Bridge gain

Dennis Ramos
 

hello guys, i just wonder if you can help me to increase my dmr audio going to allstarlink. it is a little bit low.

my existing setting are this; default

[USRP]
server = 127.0.0.1                      ; IP address of Allstar/Asterisk
toASLPort = 32001                       ; Analog_Bridge <-- ASL
fromASLPort = 34001                     ; Analog_Bridge --> ASL
aslAudio = AUDIO_UNITY                  ; Audio to ASL (AUDIO_UNITY, AUDIO_USE_AGC, AUDIO_USE_GAIN)
agcGain = -20                           ; Gain (in db) of the AGC filter
dmrAudio = AUDIO_UNITY                  ; Audio from ASL (AUDIO_UNITY, AUDIO_USE_GAIN, AUDIO_BPF)
dmrGain = 0.35                          ; Gain factor of audio from ASL (0.0-1.0)


actually i would like to understand those unity, use agc and use gain setting, and the gain levels in db. what are those for.

many thanks in advance

de dennis/m0tfg


Re: No Voice connection between 2 MMDVM (Pi-Star Software) Hotspots

Jürgen Clemenz
 

On Sun, Aug 12, 2018 at 11:21 AM, JJ Cummings wrote:
Box, not boat... yay iThing autospell bahahaha

Sent from the iRoad
 
Great it works!
I had a firewall installed on my root.
Have the port 62031 now released.
And I had in the reg_alc.py
 
PERMIT confused DENY
Thank you very much
 
I think I have to do an English course Hi Hi
 
73 Juergen


Re: No Voice connection between 2 MMDVM (Pi-Star Software) Hotspots

JJ Cummings
 

Box, not boat... yay iThing autospell bahahaha

Sent from the iRoad

On Aug 12, 2018, at 12:10, JJ Cummings <cummingsj@...> wrote:

So it doesn’t look like anything is connecting to it... I’d verify firewall/connectivity etc( basic network troubleshooting)... are you running a firewall on the boat running hblink?... when a connection attempt is made it will be clear in the log.

Sent from the iRoad

On Aug 12, 2018, at 12:06, Jürgen Clemenz <j.clemenz@...> wrote:

On Sun, Aug 12, 2018 at 08:54 AM, JJ Cummings wrote:
Set your log level to debug and retry, you will see when clients connect... or if you don’t see you know there is still something misconfigured with ports/network/firewall etc....

Sent from the iRoad
This is only Displayed here

DEBUG 2018-08-12 20:04:26,321 Logging system started, anything from here on gets logged
INFO 2018-08-12 20:04:26,322 Registration ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
INFO 2018-08-12 20:04:26,322 Registration ACL loaded: action "DENY" for 4 registration IDs
INFO 2018-08-12 20:04:26,322 HBlink TCP reporting server configured
DEBUG 2018-08-12 20:04:26,323 Periodic reporting loop started
INFO 2018-08-12 20:04:26,323 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2018-08-12 20:04:26,324 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:26,324 MASTER instance created: MASTER-1, <__main__.HBSYSTEM instance at 0x7ff47731a5a8>
DEBUG 2018-08-12 20:04:31,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:36,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:41,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:46,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:51,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:56,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:01,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:06,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:11,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:16,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:21,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:26,326 Periodic reporting loop started
DEBUG 2018-08-12 20:05:26,326 (MASTER-1) Master maintenance loop started


73 
 


Re: No Voice connection between 2 MMDVM (Pi-Star Software) Hotspots

JJ Cummings
 

So it doesn’t look like anything is connecting to it... I’d verify firewall/connectivity etc( basic network troubleshooting)... are you running a firewall on the boat running hblink?... when a connection attempt is made it will be clear in the log.

Sent from the iRoad

On Aug 12, 2018, at 12:06, Jürgen Clemenz <j.clemenz@...> wrote:

On Sun, Aug 12, 2018 at 08:54 AM, JJ Cummings wrote:
Set your log level to debug and retry, you will see when clients connect... or if you don’t see you know there is still something misconfigured with ports/network/firewall etc....

Sent from the iRoad
This is only Displayed here

DEBUG 2018-08-12 20:04:26,321 Logging system started, anything from here on gets logged
INFO 2018-08-12 20:04:26,322 Registration ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
INFO 2018-08-12 20:04:26,322 Registration ACL loaded: action "DENY" for 4 registration IDs
INFO 2018-08-12 20:04:26,322 HBlink TCP reporting server configured
DEBUG 2018-08-12 20:04:26,323 Periodic reporting loop started
INFO 2018-08-12 20:04:26,323 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2018-08-12 20:04:26,324 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:26,324 MASTER instance created: MASTER-1, <__main__.HBSYSTEM instance at 0x7ff47731a5a8>
DEBUG 2018-08-12 20:04:31,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:36,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:41,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:46,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:51,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:56,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:01,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:06,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:11,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:16,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:21,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:26,326 Periodic reporting loop started
DEBUG 2018-08-12 20:05:26,326 (MASTER-1) Master maintenance loop started


73 
 


Re: No Voice connection between 2 MMDVM (Pi-Star Software) Hotspots

Jürgen Clemenz
 

On Sun, Aug 12, 2018 at 08:54 AM, JJ Cummings wrote:
Set your log level to debug and retry, you will see when clients connect... or if you don’t see you know there is still something misconfigured with ports/network/firewall etc....

Sent from the iRoad
This is only Displayed here

DEBUG 2018-08-12 20:04:26,321 Logging system started, anything from here on gets logged
INFO 2018-08-12 20:04:26,322 Registration ACL file found, importing entries. This will take about 1.5 seconds per 1 million IDs
INFO 2018-08-12 20:04:26,322 Registration ACL loaded: action "DENY" for 4 registration IDs
INFO 2018-08-12 20:04:26,322 HBlink TCP reporting server configured
DEBUG 2018-08-12 20:04:26,323 Periodic reporting loop started
INFO 2018-08-12 20:04:26,323 HBlink 'HBlink.py' (c) 2016 N0MJS & the K0USY Group - SYSTEM STARTING...
DEBUG 2018-08-12 20:04:26,324 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:26,324 MASTER instance created: MASTER-1, <__main__.HBSYSTEM instance at 0x7ff47731a5a8>
DEBUG 2018-08-12 20:04:31,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:36,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:41,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:46,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:51,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:04:56,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:01,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:06,327 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:11,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:16,328 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:21,326 (MASTER-1) Master maintenance loop started
DEBUG 2018-08-12 20:05:26,326 Periodic reporting loop started
DEBUG 2018-08-12 20:05:26,326 (MASTER-1) Master maintenance loop started


73 
 


Re: No Voice connection between 2 MMDVM (Pi-Star Software) Hotspots

JJ Cummings
 

Set your log level to debug and retry, you will see when clients connect... or if you don’t see you know there is still something misconfigured with ports/network/firewall etc....

Sent from the iRoad

On Aug 12, 2018, at 08:08, Jürgen Clemenz <j.clemenz@...> wrote:

[Edited Message Follows]

Hello
Thanks for the help that has already been given to me.
You are a great team :-)
After I changed the port to 62031 there are no error messages in the Pi-Star protocol.
 
I have 2 MMDVM hotspots connected to Hblink Master.
But unfortunately no voice arrives.
1. MMDVM hotspot DO5VH   <----------------->2. MMDVM Hotspot DH9YAP  . The log of pi-star DO5VH and Dh9yap is attached !!

Is no status shown when starting Hblink?
for example
HOTspot ... connect
in the Status
<2.JPG>

This logfile is empty
<4.JPG>

Also this log is empty :
LOG_FILE: /tmp/hblink.log

here still my Hblink master cfg:
[GLOBAL]
PATH: ./
PING_TIME: 5
MAX_MISSED: 3
 
[REPORTS]
REPORT: False
REPORT_INTERVAL: 60
REPORT_PORT: 4321
REPORT_CLIENTS: 127.0.0.1
 
 
 
[LOGGER]
LOG_FILE: /tmp/hblink.log
LOG_HANDLERS: console-timed
LOG_LEVEL: INFO
LOG_NAME: HBlink
 
 
[ALIASES]
TRY_DOWNLOAD: True
PATH: ./
PEER_FILE: peer_ids.csv
SUBSCRIBER_FILE: subscriber_ids.csv
TGID_FILE: talkgroup_ids.csv
STALE_DAYS: 7
 
# EXPORT AMBE DATA
# This is for exporting AMBE audio frames to an an "external" process for
# decoding or other nefarious actions.
[AMBE]
EXPORT_IP: 127.0.0.1
EXPORT_PORT: 1234
 
 
[MASTER-1]
MODE: MASTER
ENABLED: True
REPEAT: True
EXPORT_AMBE: False
IP:
PORT: 62031
PASSPHRASE: funknetz.nrw
GROUP_HANGTIME: 5
 



Maybe a port problem ?

73 :-) Juergen

<Pi_Star_MMDVM_2018_08_do5vh12.log>
<Pi_Star_MMDVM_2018_08_12 dh9yap.log>


Re: HBLink Parrot Settings

EA5GVK Joaquin
 

can you send me the configuration files so that the master works in slot 2 tg 9990?
thank you very much.


No Voice connection between 2 MMDVM (Pi-Star Software) Hotspots

Jürgen Clemenz
 
Edited

Hello
Thanks for the help that has already been given to me.
You are a great team :-)
After I changed the port to 62031 there are no error messages in the Pi-Star protocol.
 
I have 2 MMDVM hotspots connected to Hblink Master.
But unfortunately no voice arrives.
1. MMDVM hotspot DO5VH   <----------------->2. MMDVM Hotspot DH9YAP  . The log of pi-star DO5VH and Dh9yap is attached !!

Is no status shown when starting Hblink?
for example
HOTspot ... connect
in the Status


This logfile is empty


Also this log is empty :
LOG_FILE: /tmp/hblink.log

here still my Hblink master cfg:
[GLOBAL]
PATH: ./
PING_TIME: 5
MAX_MISSED: 3
 
[REPORTS]
REPORT: False
REPORT_INTERVAL: 60
REPORT_PORT: 4321
REPORT_CLIENTS: 127.0.0.1
 
 
 
[LOGGER]
LOG_FILE: /tmp/hblink.log
LOG_HANDLERS: console-timed
LOG_LEVEL: INFO
LOG_NAME: HBlink
 
 
[ALIASES]
TRY_DOWNLOAD: True
PATH: ./
PEER_FILE: peer_ids.csv
SUBSCRIBER_FILE: subscriber_ids.csv
TGID_FILE: talkgroup_ids.csv
PEER_URL: https://ham-digital.org/status/rptrs.csv
SUBSCRIBER_URL: https://ham-digital.org/status/users.csv
STALE_DAYS: 7
 
# EXPORT AMBE DATA
# This is for exporting AMBE audio frames to an an "external" process for
# decoding or other nefarious actions.
[AMBE]
EXPORT_IP: 127.0.0.1
EXPORT_PORT: 1234
 
 
[MASTER-1]
MODE: MASTER
ENABLED: True
REPEAT: True
EXPORT_AMBE: False
IP:
PORT: 62031
PASSPHRASE: funknetz.nrw
GROUP_HANGTIME: 5
 



Maybe a port problem ?

73 :-) Juergen


Re: Master maintenance loop started

Jürgen Clemenz
 

On Thu, Aug 9, 2018 at 03:46 PM, Steve N4IRS wrote:
62031
Hello
it seems to work :-)
Here is the log from the pi-star:
I have the port 62031 registered.
Is the timeout from the master correct or does it still have to change a setting in the hblink.cfg?

73 Juergen

Starting logging, please wait...
M: 2018-08-10 11:16:33.121 DMR Slot 2, received RF voice header from DH9YAP to TG ALL
M: 2018-08-10 11:16:35.822 DMR Slot 2, received RF end of voice transmission, 2.5 seconds, BER: 0.3%, RSSI: -47/-47/-47 dBm
E: 2018-08-10 11:16:54.780 DMR, Connection to the master has timed out, retrying connection
M: 2018-08-10 11:16:54.781 DMR, Closing DMR Network
M: 2018-08-10 11:16:54.781 DMR, Opening DMR Network
M: 2018-08-10 11:17:11.560 DMR Slot 2, received RF voice header from DH9YAP to TG ALL
M: 2018-08-10 11:17:16.780 DMR Slot 2, received RF end of voice transmission, 5.0 seconds, BER: 0.5%, RSSI: -47/-47/-47 dBm
E: 2018-08-10 11:18:04.908 DMR, Connection to the master has timed out, retrying connection
M: 2018-08-10 11:18:04.908 DMR, Closing DMR Network
M: 2018-08-10 11:18:04.909 DMR, Opening DMR Network
M: 2018-08-10 11:19:14.841 DMR Slot 2, received RF voice header from DH9YAP to TG ALL
E: 2018-08-10 11:19:15.026 DMR, Connection to the master has timed out, retrying connection
M: 2018-08-10 11:19:15.027 DMR, Closing DMR Network
M: 2018-08-10 11:19:15.027 DMR, Opening DMR Network
M: 2018-08-10 11:19:21.863 DMR Slot 2, received RF end of voice transmission, 6.8 seconds, BER: 0.4%, RSSI: -47/-47/-47 dBm
M: 2018-08-10 11:19:34.584 DMR Slot 2, received RF voice header from DH9YAP to TG ALL
M: 2018-08-10 11:19:40.524 DMR Slot 2, received RF end of voice transmission, 5.8 seconds, BER: 0.5%, RSSI: -47/-47/-47 dBm
E: 2018-08-10 11:20:25.165 DMR, Connection to the master has timed out, retrying connection
M: 2018-08-10 11:20:25.165 DMR, Closing DMR Network
M: 2018-08-10 11:20:25.165 DMR, Opening DMR Network


Re: HBlink "socket_address" Branch

Jose - EA5SW
 

Tested the sockek branch:

hb_link runs OK for me. Connects to some systems, as peer and some peers connect to masters.
hb_confbridge links also all at the moment OK
hb_parrot don't work as master.. some errors, I tried to figure to change the config but no luck.

To be continued... 


Re: Master maintenance loop started

Steve N4IRS
 

So,
HBlink is listening on port 5400. See Albert's message about the Pi-Star firewall. I suggest you test on port 62031 since it is not firewalled.

Steve n4IRS

On 08/09/2018 06:17 PM, Jürgen Clemenz wrote:
On Thu, Aug 9, 2018 at 11:32 AM, Steve N4IRS wrote:
While hblink is running show us the result of netstat -unap
root@v293571:/home/dh9yap/HBlink# netstat -unap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp    50688      0 0.0.0.0:33462           0.0.0.0:*                           162/svxlink
udp    18432      0 0.0.0.0:33569           0.0.0.0:*                           165/svxlink
udp    47616      0 0.0.0.0:34179           0.0.0.0:*                           165/svxlink
udp    17664      0 0.0.0.0:34313           0.0.0.0:*                           170/svxlink
udp    35328      0 0.0.0.0:39745           0.0.0.0:*                           168/svxlink
udp    35328      0 0.0.0.0:40734           0.0.0.0:*                           166/svxlink
udp    50688      0 0.0.0.0:41970           0.0.0.0:*                           166/svxlink
udp    35328      0 0.0.0.0:46506           0.0.0.0:*                           162/svxlink
udp    50688      0 0.0.0.0:56694           0.0.0.0:*                           168/svxlink
udp    36864      0 0.0.0.0:56829           0.0.0.0:*                           169/svxlink
udp    15360      0 0.0.0.0:57484           0.0.0.0:*                           169/svxlink
udp    51456      0 0.0.0.0:5300            0.0.0.0:*                           150/svxreflector
udp    19200      0 0.0.0.0:5310            0.0.0.0:*                           156/svxreflector
udp    40704      0 0.0.0.0:5320            0.0.0.0:*                           146/svxreflector
udp    19200      0 0.0.0.0:5330            0.0.0.0:*                           153/svxreflector
udp    40704      0 0.0.0.0:5340            0.0.0.0:*                           149/svxreflector
udp    13824      0 0.0.0.0:5350            0.0.0.0:*                           151/svxreflector
udp    36864      0 0.0.0.0:5360            0.0.0.0:*                           147/svxreflector
udp    36864      0 0.0.0.0:5370            0.0.0.0:*                           144/svxreflector
udp        0      0 0.0.0.0:5380            0.0.0.0:*                           145/svxreflector
udp        0      0 0.0.0.0:5400            0.0.0.0:*                           171/python
root@v293571:/home/dh9yap/HBlink#
 


Re: Master maintenance loop started

Albert Lawson
 

Pi-Star has an inbound and outbound firewall configured by default that could be affecting it's ability to connect.  Have you looked at those settings by chance...???

 

73's

 

Albert/WB7AWL

 


From: main@DVSwitch.groups.io <main@DVSwitch.groups.io> on behalf of Jürgen Clemenz <j.clemenz@...>
Sent: Thursday, August 9, 2018 10:30 AM
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Master maintenance loop started
 
Maybe you can try to connect my master.
Address: 213.202.228.66
Port 5400
Password: funknetz.nrw


Re: Master maintenance loop started

Jürgen Clemenz
 

and that when we start hblink.py
appropriate


Re: Master maintenance loop started

Jürgen Clemenz
 


Portscan


Re: Master maintenance loop started

Jürgen Clemenz
 

On Thu, Aug 9, 2018 at 11:32 AM, Steve N4IRS wrote:
While hblink is running show us the result of netstat -unap
root@v293571:/home/dh9yap/HBlink# netstat -unap
Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address           Foreign Address         State       PID/Program name
udp    50688      0 0.0.0.0:33462           0.0.0.0:*                           162/svxlink
udp    18432      0 0.0.0.0:33569           0.0.0.0:*                           165/svxlink
udp    47616      0 0.0.0.0:34179           0.0.0.0:*                           165/svxlink
udp    17664      0 0.0.0.0:34313           0.0.0.0:*                           170/svxlink
udp    35328      0 0.0.0.0:39745           0.0.0.0:*                           168/svxlink
udp    35328      0 0.0.0.0:40734           0.0.0.0:*                           166/svxlink
udp    50688      0 0.0.0.0:41970           0.0.0.0:*                           166/svxlink
udp    35328      0 0.0.0.0:46506           0.0.0.0:*                           162/svxlink
udp    50688      0 0.0.0.0:56694           0.0.0.0:*                           168/svxlink
udp    36864      0 0.0.0.0:56829           0.0.0.0:*                           169/svxlink
udp    15360      0 0.0.0.0:57484           0.0.0.0:*                           169/svxlink
udp    51456      0 0.0.0.0:5300            0.0.0.0:*                           150/svxreflector
udp    19200      0 0.0.0.0:5310            0.0.0.0:*                           156/svxreflector
udp    40704      0 0.0.0.0:5320            0.0.0.0:*                           146/svxreflector
udp    19200      0 0.0.0.0:5330            0.0.0.0:*                           153/svxreflector
udp    40704      0 0.0.0.0:5340            0.0.0.0:*                           149/svxreflector
udp    13824      0 0.0.0.0:5350            0.0.0.0:*                           151/svxreflector
udp    36864      0 0.0.0.0:5360            0.0.0.0:*                           147/svxreflector
udp    36864      0 0.0.0.0:5370            0.0.0.0:*                           144/svxreflector
udp        0      0 0.0.0.0:5380            0.0.0.0:*                           145/svxreflector
udp        0      0 0.0.0.0:5400            0.0.0.0:*                           171/python
root@v293571:/home/dh9yap/HBlink#
 


Re: Master maintenance loop started

Steve N4IRS
 

While hblink is running show us the result of netstat -unap

On 8/9/2018 2:31 PM, Jürgen Clemenz wrote:
When starting hblink, the port 5400 is not opened.
Other applications such as Svxlink's Svxlink open doe ports.



Re: Master maintenance loop started

Jürgen Clemenz
 

When starting hblink, the port 5400 is not opened.
Other applications such as Svxlink's Svxlink open doe ports.

7541 - 7560 of 9595