Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem
Mike, FYI, I'm having no issues using
Firefox with the latest hUC. I'm running the latest Firefox on
Windows 10.
On 24/3/21 11:44 pm, Mike Zingman -
N4IRR wrote:
So I can reproduce you issue, please tell me the OS version by running
-- 73 de Tony VK3JED/VK3IRL http://vkradio.com
|
|
Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem
JerryL
Hi Mike,
In addition to t my last reply with the screen shot 'uname -a', attached is what I look at when using Firefox.
|
|
Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem
JerryL
Hi Mike,
MX Linux (#1 Distrowatch) see the attached. I've never attached a file that way, I hope it worked. If it didn't I'll plug in all the details. ~Jerry, KB3OIL
|
|
Re: Analog Reflector (hUC) installation problem turned out to be a Firefox problem
So I can reproduce you issue, please tell me the OS version by running
uname -a and reporting the results. All tests I have done with FF have worked, so I want to see if I broke something recently.
|
|
Analog Reflector (hUC) installation problem turned out to be a Firefox problem
JerryL
I tried to get the Analog Reflector (hUC) going for a couple of weeks without any luck. I could get it onto the web page just fine with Firefox. It let me have audio in, but no transmit out because Firefox did not even give me the 'Transmit' button (how the heck did Firefox do that ????) I finally had a friend watch me remotely reinstall the AR (uHC) with 'AnyDesk'. Neither of us could see a problem or see any error codes. Finally I tried to fire up the hUC web site with Chrome instead of Firefox. This was after Chrome asked if I was sure I wanted to install an unsecured web site. And asked again if was I really sure, and really really sure or whatever they were asking, I agreed to all. Firefox and other browsers asked the same questions. Anyway it now works perfectly on two Linux computers with Chrome and nothing else that I've tried. I want to see how it works on a friends computer. Now it's up and onward to getting Allstar installed. Thank you Steve, Mike and your team for putting all this together.
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
Ok Thanks again for your help.
73 Bill N3JHS
|
|
Re: #brandmeister
#brandmeister
Bill,
toggle quoted messageShow quoted text
You don't need a repeater ID for a bridge. Using your DMR ID for a TG number is just fine. Look in Analog_Bridge.ini for this: [AMBE_AUDIO] minTxTimeMS = 2500 ; Analog -> Digital Minimum time in MS for hang delay (0-10000) Increase the value to 3000 and restart Analog_brige. That should help. Steve N4IRS
On 3/23/2021 1:25 PM, Bill Kittilson
wrote:
Thanks! That fixed the issue. Not sure how that got deleted.
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
Thanks! That fixed the issue. Not sure how that got deleted.
I'm using my DMR ID as the talk group. This seams to work until someone on my allstar or DMR has a bad connection and drop the connection too many times Then I get "user blocked" from Brandmister. Someone said get a repeater ID, I have one but no idea how to use it for the bridge. Have you use a repeater id for bridging? Thanks Bill
|
|
Re: #brandmeister
#brandmeister
Your network should look like this:
toggle quoted messageShow quoted text
[DMR Network] Port=62031 Local=62032 Plus all your other settings.
On 3/23/2021 1:04 PM, Bill Kittilson
wrote:
Changed the port
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
Changed the port
I: 2021-03-23 17:03:32.441 General Parameters
I: 2021-03-23 17:03:32.441 Callsign: N3JHS
I: 2021-03-23 17:03:32.441 Id: 314210310
I: 2021-03-23 17:03:32.441 Duplex: no
I: 2021-03-23 17:03:32.441 Timeout: 180s
I: 2021-03-23 17:03:32.441 D-Star: disabled
I: 2021-03-23 17:03:32.441 DMR: enabled
I: 2021-03-23 17:03:32.441 YSF: enabled
I: 2021-03-23 17:03:32.441 P25: disabled
I: 2021-03-23 17:03:32.441 NXDN: disabled
I: 2021-03-23 17:03:32.442 Modem Parameters
I: 2021-03-23 17:03:32.442 Port: /dev/null
I: 2021-03-23 17:03:32.442 RX Invert: no
I: 2021-03-23 17:03:32.442 TX Invert: no
I: 2021-03-23 17:03:32.442 PTT Invert: no
I: 2021-03-23 17:03:32.442 TX Delay: 100ms
I: 2021-03-23 17:03:32.442 RX Offset: 0Hz
I: 2021-03-23 17:03:32.442 TX Offset: 0Hz
I: 2021-03-23 17:03:32.442 RX DC Offset: 0
I: 2021-03-23 17:03:32.442 TX DC Offset: 0
I: 2021-03-23 17:03:32.442 RF Level: 100.0%
I: 2021-03-23 17:03:32.442 DMR Delay: 0 (0.0ms)
I: 2021-03-23 17:03:32.442 RX Level: 50.0%
I: 2021-03-23 17:03:32.442 CW Id TX Level: 50.0%
I: 2021-03-23 17:03:32.442 D-Star TX Level: 50.0%
I: 2021-03-23 17:03:32.442 DMR TX Level: 50.0%
I: 2021-03-23 17:03:32.442 YSF TX Level: 50.0%
I: 2021-03-23 17:03:32.442 P25 TX Level: 50.0%
I: 2021-03-23 17:03:32.443 NXDN TX Level: 50.0%
I: 2021-03-23 17:03:32.443 RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 17:03:32.443 TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 17:03:32.443 Opening the MMDVM
I: 2021-03-23 17:03:32.443 Display Parameters
I: 2021-03-23 17:03:32.443 Type:
I: 2021-03-23 17:03:32.443 DMR Network Parameters
I: 2021-03-23 17:03:32.443 Address: 3103.repeater.net
I: 2021-03-23 17:03:32.443 Port: 0
I: 2021-03-23 17:03:32.443 Local: 62032
I: 2021-03-23 17:03:32.443 Jitter: 360ms
I: 2021-03-23 17:03:32.443 Slot 1: disabled
I: 2021-03-23 17:03:32.443 Slot 2: enabled
I: 2021-03-23 17:03:32.443 Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigned int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool, bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
|
|
Re: #brandmeister
#brandmeister
See my message about the port and local port.
toggle quoted messageShow quoted text
On 3/23/2021 12:55 PM, Bill Kittilson
wrote:
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
M: 2021-03-23 16:52:25.359 MMDVM_Bridge-20200309_V1.5.1 is starting
M: 2021-03-23 16:52:25.359 Built 19:52:05 May 16 2020 (GitID #fcd30b9)
I: 2021-03-23 16:52:25.359 General Parameters
I: 2021-03-23 16:52:25.359 Callsign: N3JHS
I: 2021-03-23 16:52:25.359 Id: 314210311
I: 2021-03-23 16:52:25.359 Duplex: no
I: 2021-03-23 16:52:25.359 Timeout: 180s
I: 2021-03-23 16:52:25.359 D-Star: disabled
I: 2021-03-23 16:52:25.359 DMR: enabled
I: 2021-03-23 16:52:25.359 YSF: enabled
I: 2021-03-23 16:52:25.359 P25: disabled
I: 2021-03-23 16:52:25.359 NXDN: disabled
I: 2021-03-23 16:52:25.359 Modem Parameters
I: 2021-03-23 16:52:25.359 Port: /dev/null
I: 2021-03-23 16:52:25.360 RX Invert: no
I: 2021-03-23 16:52:25.360 TX Invert: no
I: 2021-03-23 16:52:25.360 PTT Invert: no
I: 2021-03-23 16:52:25.360 TX Delay: 100ms
I: 2021-03-23 16:52:25.360 RX Offset: 0Hz
I: 2021-03-23 16:52:25.360 TX Offset: 0Hz
I: 2021-03-23 16:52:25.360 RX DC Offset: 0
I: 2021-03-23 16:52:25.360 TX DC Offset: 0
I: 2021-03-23 16:52:25.360 RF Level: 100.0%
I: 2021-03-23 16:52:25.360 DMR Delay: 0 (0.0ms)
I: 2021-03-23 16:52:25.360 RX Level: 50.0%
I: 2021-03-23 16:52:25.360 CW Id TX Level: 50.0%
I: 2021-03-23 16:52:25.360 D-Star TX Level: 50.0%
I: 2021-03-23 16:52:25.360 DMR TX Level: 50.0%
I: 2021-03-23 16:52:25.360 YSF TX Level: 50.0%
I: 2021-03-23 16:52:25.360 P25 TX Level: 50.0%
I: 2021-03-23 16:52:25.360 NXDN TX Level: 50.0%
I: 2021-03-23 16:52:25.360 RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 16:52:25.361 TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 16:52:25.361 Opening the MMDVM
I: 2021-03-23 16:52:25.361 Display Parameters
I: 2021-03-23 16:52:25.361 Type:
I: 2021-03-23 16:52:25.361 DMR Network Parameters
I: 2021-03-23 16:52:25.361 Address: 3103.repeater.net
I: 2021-03-23 16:52:25.361 Port: 0
I: 2021-03-23 16:52:25.361 Local: 62031
I: 2021-03-23 16:52:25.361 Jitter: 360ms
I: 2021-03-23 16:52:25.362 Slot 1: disabled
I: 2021-03-23 16:52:25.362 Slot 2: enabled
I: 2021-03-23 16:52:25.362 Mode Hang: 3s
MMDVM_Bridge: DMRNetwork.cpp:74: CDMRNetwork::CDMRNetwork(const string&, unsigne d int, unsigned int, unsigned int, const string&, bool, const char*, bool, bool, bool, HW_TYPE): Assertion `port > 0U' failed.
Aborted
root@raspberrypi:/opt/MMDVM_Bridge#
|
|
Re: #brandmeister
#brandmeister
Well,
toggle quoted messageShow quoted text
The log file says it's running. Did you change anything with the program?
On 3/23/2021 12:49 PM, Bill Kittilson
wrote:
On Tue, Mar 23, 2021 at 09:38 AM, Steve N4IRS wrote:
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
On Tue, Mar 23, 2021 at 09:38 AM, Steve N4IRS wrote:
./MMDVM_Bridge MMDVM_Bridge.ini -bash: ./MMDVM_Bridge: cannot execute binary file: Exec format error Im on Pi if that makes any differance.
|
|
Re: #brandmeister
#brandmeister
Bill,
toggle quoted messageShow quoted text
You sent this for your config: [DMR Network] Enable=1 Address=3103.repeater.net Jitter=360 Local=62031
<--------------------------- Should be 62032 Password=mypassword # for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md # for XLX the syntax is: Options=XLX:4009 # Options= Slot1=0 Slot2=1 Debug=1
And this is in your log: I: 2021-03-23
15:56:02.905 DMR Network Parameters Port seems to be missing from the [DMR Network] section and local port is wrong. Steve N4IRS
On 3/23/2021 12:34 PM, Bill Kittilson
wrote:
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
|
|
Re: #brandmeister
#brandmeister
Based on the log, I think MB has a problem with the config. Not sure
what. I would:
toggle quoted messageShow quoted text
systemctl stop mmdvm_bridge cd /opt/MMDVM_Bridge ./MMDVM_Bridge MMDVM_Bridge.ini show the result, to the end. Steve
On 3/23/2021 12:34 PM, Bill Kittilson
wrote:
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
On Tue, Mar 23, 2021 at 09:29 AM, Steve N4IRS wrote:
I would like to see the log where MB is trying to connect to BM.
|
|
Re: #brandmeister
#brandmeister
OK,
toggle quoted messageShow quoted text
Your settings look good. I would like to see the log where MB is trying to connect to BM.
On 3/23/2021 12:25 PM, Bill Kittilson
wrote:
|
|
Re: #brandmeister
#brandmeister
Bill Kittilson
log file:
I: 2021-03-23 15:56:02.904 Callsign: N3JHS I: 2021-03-23 15:56:02.904 Id: 3142103
I: 2021-03-23 15:56:02.904 Duplex: no
I: 2021-03-23 15:56:02.904 Timeout: 180s
I: 2021-03-23 15:56:02.905 D-Star: disabled
I: 2021-03-23 15:56:02.905 DMR: enabled
I: 2021-03-23 15:56:02.905 YSF: enabled
I: 2021-03-23 15:56:02.905 P25: disabled
I: 2021-03-23 15:56:02.905 NXDN: disabled
I: 2021-03-23 15:56:02.905 Modem Parameters
I: 2021-03-23 15:56:02.905 Port: /dev/null
I: 2021-03-23 15:56:02.905 RX Invert: no
I: 2021-03-23 15:56:02.905 TX Invert: no
I: 2021-03-23 15:56:02.905 PTT Invert: no
I: 2021-03-23 15:56:02.905 TX Delay: 100ms
I: 2021-03-23 15:56:02.905 RX Offset: 0Hz
I: 2021-03-23 15:56:02.905 TX Offset: 0Hz
I: 2021-03-23 15:56:02.905 RX DC Offset: 0
I: 2021-03-23 15:56:02.905 TX DC Offset: 0
I: 2021-03-23 15:56:02.905 RF Level: 100.0%
I: 2021-03-23 15:56:02.905 DMR Delay: 0 (0.0ms)
I: 2021-03-23 15:56:02.905 RX Level: 50.0%
I: 2021-03-23 15:56:02.905 CW Id TX Level: 50.0%
I: 2021-03-23 15:56:02.905 D-Star TX Level: 50.0%
I: 2021-03-23 15:56:02.905 DMR TX Level: 50.0%
I: 2021-03-23 15:56:02.905 YSF TX Level: 50.0%
I: 2021-03-23 15:56:02.905 P25 TX Level: 50.0%
I: 2021-03-23 15:56:02.905 NXDN TX Level: 50.0%
I: 2021-03-23 15:56:02.905 RX Frequency: 446100000Hz (446100000Hz)
I: 2021-03-23 15:56:02.905 TX Frequency: 446100000Hz (446100000Hz)
M: 2021-03-23 15:56:02.905 Opening the MMDVM
I: 2021-03-23 15:56:02.905 Display Parameters
I: 2021-03-23 15:56:02.905 Type:
I: 2021-03-23 15:56:02.905 DMR Network Parameters
I: 2021-03-23 15:56:02.905 Address: 3103.repeater.net
I: 2021-03-23 15:56:02.905 Port: 0
I: 2021-03-23 15:56:02.905 Local: 62031
I: 2021-03-23 15:56:02.905 Jitter: 360ms
I: 2021-03-23 15:56:02.905 Slot 1: disabled
I: 2021-03-23 15:56:02.905 Slot 2: enabled
I: 2021-03-23 15:56:02.905 Mode Hang: 3s
[General]
Callsign=N3JHS
Id=3142103
Timeout=180
Duplex=0
[Info]
RXFrequency=446100000
TXFrequency=446100000
Power=1
Latitude=40.151390
Longitude=-74.827390
Height=30
Location=Levittown, PA
Description=MMDVM_Bridge
URL=https://groups.io/g/DVSwitch
|
|
Re: #brandmeister
#brandmeister
Set duplex = 0
toggle quoted messageShow quoted text
frequencies to simplex make sure callsign and dmrID point to correct user. What does the log show?
On 3/23/2021 12:10 PM, Bill Kittilson
wrote:
|
|