Date   

Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Eric-K6KWB
 

Yes you need two MB one connect to BM and one for YSF Gateway. Almost similar to the first one you create use YSF Gateway and select FCS.
BM-TG??<->MB_BM<->MB_YSF<->YSF Gateway<->FCS003

Did you download from DVSwitch System Builder a complete package:
https://github.com/DVSwitch/DVSwitch-System-Builder

Looks like Steve have developed a new update to steer TGs in MB, will see how does it work, thank you Steve for this update. :)
73, Eric


Re: Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge

Steve N4IRS
 

To connect to FCS, you will need to use YSFGateway. (today)

Steve N4IRS

On 5/16/20 4:42 PM, Rudy N6DOZ wrote:

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.
 


Re: Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge

Rudy N6DOZ
 
Edited

When I transmit to the TG, it looks like  MB sees it, but no audio on the other end.

I: 2020-05-16 20:36:39.678 MMDVM_Bridge:
I: 2020-05-16 20:36:39.679 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-16 20:36:39.679 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-16 20:36:39.679 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-16 20:36:39.679 This software is for use on amateur radio networks only,
I: 2020-05-16 20:36:39.679 it is to be used for educational purposes only. Its use on
I: 2020-05-16 20:36:39.679 commercial networks is strictly prohibited.
I: 2020-05-16 20:36:39.679 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-16 20:36:39.679 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-16 20:36:39.679 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-16 20:36:39.679 General Parameters
I: 2020-05-16 20:36:39.679     Callsign: N6DOZ
I: 2020-05-16 20:36:39.679     Id: 315069250
I: 2020-05-16 20:36:39.679     Duplex: no
I: 2020-05-16 20:36:39.679     Timeout: 180s
I: 2020-05-16 20:36:39.679     DMR: enabled
I: 2020-05-16 20:36:39.680     YSF: enabled
M: 2020-05-16 20:36:39.681 Opening the MMDVM
I: 2020-05-16 20:36:39.681 Display Parameters
I: 2020-05-16 20:36:39.681     Type: 
I: 2020-05-16 20:36:39.681 DMR Network Parameters
I: 2020-05-16 20:36:39.681     Address: 3103.repeater.net
I: 2020-05-16 20:36:39.681     Port: 62031
I: 2020-05-16 20:36:39.681     Local: 62032
I: 2020-05-16 20:36:39.681     Jitter: 360ms
I: 2020-05-16 20:36:39.681     Slot 1: disabled
I: 2020-05-16 20:36:39.682     Slot 2: enabled
I: 2020-05-16 20:36:39.683 Info Parameters
I: 2020-05-16 20:36:39.683     Callsign: N6DOZ
M: 2020-05-16 20:36:39.684 DMR, Opening DMR Network
I: 2020-05-16 20:36:39.684 System Fusion Network Parameters
I: 2020-05-16 20:36:39.684     Local Address: 0
I: 2020-05-16 20:36:39.684     Local Port: 3201
I: 2020-05-16 20:36:39.684     Gateway Address: fcs004.xreflector.net
I: 2020-05-16 20:36:39.684     Gateway Port: 62500
I: 2020-05-16 20:36:39.684     Mode Hang: 3s
M: 2020-05-16 20:36:39.684 Opening YSF network connection
I: 2020-05-16 20:36:39.684 RSSI
I: 2020-05-16 20:36:39.684     Mapping File: RSSI.dat
W: 2020-05-16 20:36:39.685 Cannot open the RSSI data file - RSSI.dat
I: 2020-05-16 20:36:39.685 DMR Id Lookups
I: 2020-05-16 20:36:39.685     File: /var/lib/mmdvm/DMRIds.dat
I: 2020-05-16 20:36:39.685     Reload: 24 hours
I: 2020-05-16 20:36:39.847 Loaded 164578 Ids to the DMR callsign lookup table
I: 2020-05-16 20:36:39.847 DMR RF Parameters
I: 2020-05-16 20:36:39.847     Id: 315069250
I: 2020-05-16 20:36:39.847     Color Code: 1
I: 2020-05-16 20:36:39.847     Self Only: no
I: 2020-05-16 20:36:39.847     Embedded LC Only: yes
I: 2020-05-16 20:36:39.848     Dump Talker Alias Data: no
I: 2020-05-16 20:36:39.848     Prefixes: 0
I: 2020-05-16 20:36:39.848     Call Hang: 3s
I: 2020-05-16 20:36:39.848     TX Hang: 3s
I: 2020-05-16 20:36:39.848     Mode Hang: 10s
M: 2020-05-16 20:36:39.848 DMR, Opening INI file: DVSwitch.ini
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] TXPort -> 33100
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] RXPort -> 33103
M: 2020-05-16 20:36:39.848 DMR, Setting [DMR] Slot -> 2
M: 2020-05-16 20:36:39.848 DMR, Transmitting on 127.0.0.1:33100 and listening on port 33103.  Result = 1
I: 2020-05-16 20:36:39.848 YSF RF Parameters
I: 2020-05-16 20:36:39.848     Low Deviation: no
I: 2020-05-16 20:36:39.848     Remote Gateway: no
I: 2020-05-16 20:36:39.848     Self Only: no
I: 2020-05-16 20:36:39.848     DSQ: no
I: 2020-05-16 20:36:39.849     Mode Hang: 10s
M: 2020-05-16 20:36:39.849 YSF, Opening INI file: DVSwitch.ini
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] Address -> 127.0.0.1
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] TXPort -> 33103
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] RXPort -> 33100
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] FallbackID -> 3135404
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] ExportTG -> 311620
M: 2020-05-16 20:36:39.849 YSF, Setting [YSF] Slot -> 2
M: 2020-05-16 20:36:39.849 YSF, Transmitting on 127.0.0.1:33103 and listening on port 33100.  Result = 1
M: 2020-05-16 20:36:39.849 MMDVM_Bridge-20191105_V1.4.1 is running
I: 2020-05-16 20:36:39.849 Started the DMR Id lookup reload thread
D: 2020-05-16 20:36:49.858 DMR, Sending authorisation
D: 2020-05-16 20:36:49.863 DMR, Sending configuration
M: 2020-05-16 20:36:49.868 DMR, Logged into the master successfully
M: 2020-05-16 20:37:35.663 DMR Slot 2, received network late entry from N6DOZ to TG 311620
M: 2020-05-16 20:37:35.663 YSF, TX state = ON
I: 2020-05-16 20:37:35.663 YSF, Begin TX: src=3135404 rpt=0 dst=311620 slot=2 cc=0 metadata=N6DOZ
I: 2020-05-16 20:37:35.724 YSF, Narrow transmit (72 bit)
M: 2020-05-16 20:37:36.264 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '
M: 2020-05-16 20:37:36.982 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'
M: 2020-05-16 20:37:38.182 DMR Slot 2, received network end of voice transmission, 2.6 seconds, 0% packet loss, BER: 0.0%
M: 2020-05-16 20:37:38.182 YSF, TX state = OFF


Is it possible to bridge an FCS reflector to DMR? (2020) #mmdvm_bridge

Rudy N6DOZ
 
Edited

I currently have a successful bridge between my YSF reflector to DMR through MMDVM_Bridge.

Is it possible to emulate the same idea, but to an FCS reflector?

BM_TG <-> MB <-> FCS00457

Here's my attempt at this (just realized, there's no entry for me to put the reflector number):

MMDVM.ini

[General]
Callsign=N6DOZ
Id=315069250
Timeout=180
Duplex=0

 

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

 

[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

 

[System Fusion Network] ; FCS
Enable=1
LocalAddress=0
LocalPort=3201
GatewayAddress=fcs004.xreflector.net
GatewayPort=62500
Debug=0


DVSwitch.ini

; Configure the DMR Partner
; Audio format is AMBE 72 bit
[DMR]
Address = 127.0.0.1             
TXPort = 33100                  
RXPort = 33103                  
Slot = 2                        
; Slot = 1                      
 
 
; Configure the Yaesu Fusion Partner
; Audio format is AMBE 72 bit
; Audio format is IMBE 88 bit
[YSF]
Address = 127.0.0.1            
TXPort = 33103                 
RXPort = 33100                 
FallbackID = 3135404           
ExportTG = 311620               
Slot = 2                       


Q. Is this even possible? Or is there a different method to this? 

Thanks in advance, 7-3 N6DOZ.

======

TL;DR

Got it working based with help from Eric K6KWB and Steve N4IRS.

This is what I ended up with:
 
BM <-> MB <-> YSFGateway <-> FCS Reflector

MMDVM_Bridge.ini
 
[General]
Callsign=N6DOZ
Id=315069220
Timeout=180
Duplex=0
 
[Log]
# Logging levels, 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal
DisplayLevel=1
FileLevel=2
FilePath=/var/log/mmdvm
FileRoot=MMDVM_Bridge-DMX
 
[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[System Fusion]
Enable=1
 
[DMR Network] ; to DMR
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Password=passw0rd
Slot1=0
Slot2=1
Debug=0
 
[System Fusion Network]
Enable=1
LocalAddress=0
LocalPort=62045
GatewayAddress=127.0.0.1
GatewayPort=62046
Debug=0
 
 
 
DVSwitch.ini
 
[DMR]
Address = 127.0.0.1             
TXPort = 34100                  
RXPort = 34103                
Slot = 2                       
 
[YSF]
Address = 127.0.0.1              
TXPort = 34103                  
RXPort = 34100                  
FallbackID = 3135404            
ExportTG = 311620               
Slot = 2                        
 
 
YSFGateway.ini
 
[General]
Callsign=N6DOZ
#Suffix=RPT
# Suffix=ND
Id=3150692
RptAddress=127.0.0.1
RptPort=62045
LocalAddress=127.0.0.1
LocalPort=62046
Daemon=0
 
[Network]
Startup=FCS00457
InactivityTimeout=10
Revert=0
Debug=0
 
[FCS Network]
Enable=1
Rooms=/var/lib/mmdvm/FCSRooms.txt
Port=42001
 


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Steve N4IRS
 
Edited

Ernie,
If you are running your bridge on a Pi (armhf) we have added the ability to steer TGs (just like slots) in MB. I have pushed the change to github. See the added parameter in dvswitch.ini {DMR] stanza.
Try it if you want to.

3, Steve N4IRS


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Rudy N6DOZ
 

Thanks Eric for taking the time.

I do have a working setup of this, which I set aside so that the XLX and YSF reflectors can connect to two different BM TGs at the same time (when needed), then go back to the old setup when not in need to do so.

Do you think I can use MMDVM_Bridge to remotely link my FCS003 reflector to DMR? That's what I am trying to do now.

Cheers! 7-3


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Eric-K6KWB
 

Rudy,
In this set up you will NOT use DMRGateway anymore. 
BM-TG-A<->MB1<->YSF   >>>this one looks good!
the second one will be:
XLX<->MB2<->YSF   >>> both your instance will connect to YSF Ref. make sure to pay attention to the port.

Looks like this:
BM-TG??set on BM self care<->MB1<-.>YSF  That is done deal, make sure cross the port on DVSwitch.ini

(working Sample)

MB1
[DMR Network]
Enable=1
Address=3103.repeater.net
Port=62031
Jitter=360
Local=62032
Password=passw0rd
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Slot1=0
Slot2=1
Debug=0

[System Fusion Network]
Enable=1
LocalAddress=127.0.0.1
LocalPort=0
GatewayAddress=point to your ysf reflector
GatewayPort=42000  >>port of your reflector
Debug=0
 
DVS.ini
[DMR]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35103                  ; Port to send AMBE TLV frames to (export)
RXPort = 35100                  ; Port to listen on (import)
Slot = 2     

[YSF]
Address = 127.0.0.1             ; Address to send AMBE TLV frames to (export)
TXPort = 35100                  ; Port to send AMBE TLV frames to (export)
RXPort = 35103                  ; Port to listen on (import)
FallbackID = your id            ; In case we can not find a valid DMR id in the database, export this one
ExportTG = TG                ; Which TG to export
Slot = 2                        ; Export slot

Thats it for MB1, you can create your existing MB to connect to XLX to YSF just point your MB.ini to your XLX so with your YSF Ref and just do similar cross port on DVS.ini . I hope this help, what I want to accomplish is to bridge DMR,YSF and XLX Dstar.
73, Eric
   



Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Rudy N6DOZ
 
Edited

Eric,

Thanks for that.

I initially had this setup, but wanted the XLX and YSF to be independent if I wanted to switch one reflector to a different TG. The setup below, YSF is acting as the gateway to DMR?

BM-TG <->MB1<->YSF<->MB2<->XLX

Is that what you are talking about?

I wanted them to stand alone for the scenario below if necessary:

BM-TG-A<->MB1<->YSF

BM-TG-B<->DMRGateway<->MB<->MB<->XLX


However, I do understand my prior setup is more efficient.

Is there a more efficient way of achieving the scenario above?

Thanks again for getting back. 7-3

 

---

 

My next project is to get the FCS reflector bridged to DMR, since you mentioned FCS... I guess I can search and look for answers or start a new thread for that. 


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Eric-K6KWB
 

Rudy,
Also if you have a FCS you can do the same way by replacing DMRGateway to YSFGateway.

Bridging XLX I only use one instance of MB but I point to YSF reflector looks like this:
First instance:
XLX<->BM<->YSF   this is very efficient 

To bridge BM -TG I also use one instance of MB and also point to YSF reflector.
Second instance:
BM-TG<->MB<->YSF 

This is not a chain both instances run independently in one box. The downside is if you dont have YSF reflector then you go back to square one : (
73, Eric


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Rudy N6DOZ
 
Edited

I ended up doing what Ernie Gm7kbk suggested, which is basically running the MB_BM through DMRGateway to change TG9 to my target TG. 

BM <-> DMRGateway <-> MB_BM <-> MB_XLX <-> XLX

Works great! Now I have audio both ways.

Thanks everyone! 7-3

=== for reference  ===

DMRGateway

DMRGateway.ini
 
[General]
Timeout=10
# RFTimeout=10
# NetTimeout=7
RptAddress=127.0.0.1
RptPort=62052
LocalAddress=127.0.0.1
LocalPort=62051
RuleTrace=0
Daemon=0
Debug=0 

# BrandMeister
[DMR Network 1]
Enabled=1
Name=BM
Address=3103.repeater.net     # 74.91.118.251 Change to the address for your Master
Port=62031
# Local=3352
# Local cluster
TGRewrite=1,9,1,9,1
# Reflector TG on to slot 2 TG9
# TGRewrite=2,9,2,9,1
TGRewrite=2,9,2,311620,1            # ROUTES TG9 to target TG on BM
# XLX TG 6 on to slot 2 BM TG12345 # Change 12345 to desired BM TG
# TGRewrite=2,6,2,12345,1
# Reflector control command slot 2 94000->4000 to 95000->5000
PCRewrite=2,94000,2,4000,1001
# Echo on RF slot 1 TG9990 to network slot 1 9990
TypeRewrite=1,9990,1,9990
SrcRewrite=1,9990,1,9990,1
# Reflector status returns
SrcRewrite=2,4000,2,9,1001
# Pass all of the other private traffic on slot 1 and slot 2
PassAllPC=1
PassAllPC=2
Password="passw0rd" # Make sure the password is passw0rd for BM
Location=1
Debug=0 


MB_BM 

MMDVM_Bridge.ini


[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0

[DMR Network] ; to DMR
Enable=1
Address=127.0.0.1
Port=62051
Jitter=360
Local=62052
Password=passw0rd
Slot1=0
Slot2=1
Debug=0

DVSwitch.ini

[DMR]
Address = 127.0.0.1            
TXPort = 32103                 
RXPort = 32100                 
Slot = 2                       
; Slot = 1                   

MB_XLX

MMDVM_Bridge.ini

[DMR]
Enable=1
ColorCode=1
EmbeddedLCOnly=1
DumpTAData=0
 
[DMR Network] ; to DMR
Enable=1
Address=45.77.186.5   # IP Address of XLX reflector
Port=62030
Jitter=360
#Local=62033
#Password=passw0rd
Password=PASSWORD
# for DMR+ see https://github.com/DVSwitch/MMDVM_Bridge/blob/master/DOC/DMRplus_startup_options.md
# for XLX the syntax is: Options=XLX:4009
# Options=
Options=XLX:4001    # Option for module A
Slot1=0
Slot2=1
Debug=0

DVSwitch.ini

[DMR]
Address = 127.0.0.1            
TXPort = 32100                 
RXPort = 32103                 
Slot = 2                       
; Slot = 1                     



Re: agile Allstar node from MMDVM

Patrick Perdue
 

I would’ve thought that as well, although if I Chi up on a digital radio and start sending DTMF, it sounds pretty pure on other DMR radios, as well as on the other side of MMDVM bridge. I was pretty surprised about that. apparently, it works well enough if you are sending baseband analog audio directly to ASL through a FOB when sent through fusion, but this person was hoping for a software solution entirely.

On May 16, 2020, at 02:02, Brad N8PC <@N8PC> wrote:

no cause once converted to digital sounds funny to analog and does not work.

On 5/16/2020 12:37 AM, Patrick Perdue wrote:
Hi:

I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other way around, sending DTMF commands to an Allstar node to change modes and digital talkgroups/reflectors. My first thought is no, because USRP seems to just pass DTMF through as audio, and there is no DSP to process incoming audio to send to Asterisk as commands, such as would be the case with the SimpleUSB driver and an analog radio. Has anyone here done this, and is

this at all possible?




Re: agile Allstar node from MMDVM

Brad N8PC
 

no cause once converted to digital sounds funny to analog and does not work.

On 5/16/2020 12:37 AM, Patrick Perdue wrote:
Hi:

I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other way around, sending DTMF commands to an Allstar node to change modes and digital talkgroups/reflectors. My first thought is no, because USRP seems to just pass DTMF through as audio, and there is no DSP to process incoming audio to send to Asterisk as commands, such as would be the case with the SimpleUSB driver and an analog radio. Has anyone here done this, and is

this at all possible?


agile Allstar node from MMDVM

Patrick Perdue
 

Hi:

I was just asked by someone if it was possible to pass DTMF from YSF to DMR to an Allstar node such that it can be driven remotely from MMDVM, rather than what most people want going the other way around, sending DTMF commands to an Allstar node to change modes and digital talkgroups/reflectors. My first thought is no, because USRP seems to just pass DTMF through as audio, and there is no DSP to process incoming audio to send to Asterisk as commands, such as would be the case with the SimpleUSB driver and an analog radio. Has anyone here done this, and is

this at all possible?


Re: Setup HBlink.... #hblink

Steve N4IRS
 

Mitch,
This is the subgroup for HBlink <https://dvswitch.groups.io/g/HBlink>

Steve N4IRS

On 5/15/20 8:44 PM, Mitch Savage EA7KDO wrote:
Hello, My name is Mitch Savage.  Residence is in Motril, Spain.  Current callsign is EA7KDO.  USA callsign is KJ5NL.
I am attempting to create a DMR reflector.  A ham friend who is a great programmer helped me set up a great DMR
reflector 2 years ago.  We were running it on a Raspberry pi 3B+.  It was supporting about 40 or so users.  I have a fiber
Internet connection, 1.5 Gb symmetrical.  Works Great.  I lost the code for my reflector, and want to set it up again.  I 
have installed HBlink3, DMR utils, Python3 along with twisted.  Now that I have it, I do not know how to set it up and use
it.  I want to set this up only as a DMR reflector.  No repeaters..... Nothing else.....  Just a place where my friends and I 
can talk.  A push in the right direction would be greatly appreciated!
Mitch



Setup HBlink.... #hblink

 

Hello, My name is Mitch Savage.  Residence is in Motril, Spain.  Current callsign is EA7KDO.  USA callsign is KJ5NL.
I am attempting to create a DMR reflector.  A ham friend who is a great programmer helped me set up a great DMR
reflector 2 years ago.  We were running it on a Raspberry pi 3B+.  It was supporting about 40 or so users.  I have a fiber
Internet connection, 1.5 Gb symmetrical.  Works Great.  I lost the code for my reflector, and want to set it up again.  I 
have installed HBlink3, DMR utils, Python3 along with twisted.  Now that I have it, I do not know how to set it up and use
it.  I want to set this up only as a DMR reflector.  No repeaters..... Nothing else.....  Just a place where my friends and I 
can talk.  A push in the right direction would be greatly appreciated!
Mitch


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Rudy N6DOZ
 

Forum keeps chopping my message, so I'm posting this separately:

MB_XLX

I: 2020-05-15 07:06:41.725 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT
I: 2020-05-15 07:06:48.212 MMDVM_Bridge:
I: 2020-05-15 07:06:48.212 Portions Copyright (C) 2018 DVSwitch, INAD.
I: 2020-05-15 07:06:48.212 Hacks by Mike N4IRR and Steve N4IRS
I: 2020-05-15 07:06:48.212 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
I: 2020-05-15 07:06:48.213 This software is for use on amateur radio networks only,
I: 2020-05-15 07:06:48.213 it is to be used for educational purposes only. Its use on
I: 2020-05-15 07:06:48.213 commercial networks is strictly prohibited.
I: 2020-05-15 07:06:48.213 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others
M: 2020-05-15 07:06:48.213 MMDVM_Bridge-20191105_V1.4.1 is starting
M: 2020-05-15 07:06:48.213 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)
I: 2020-05-15 07:06:48.213 General Parameters
I: 2020-05-15 07:06:48.213     Callsign: N6DOZ
I: 2020-05-15 07:06:48.213     Id: 3150692
I: 2020-05-15 07:06:48.213     DMR: enabled
I: 2020-05-15 07:06:48.215 Display Parameters
I: 2020-05-15 07:06:48.215     Type: 
I: 2020-05-15 07:06:48.215 DMR Network Parameters
I: 2020-05-15 07:06:48.215     Address: 45.77.186.5
I: 2020-05-15 07:06:48.215     Port: 62030
I: 2020-05-15 07:06:48.215     Local: 62033
I: 2020-05-15 07:06:48.215     Slot 1: disabled
I: 2020-05-15 07:06:48.215     Slot 2: enabled
I: 2020-05-15 07:06:48.215     Options: XLX:4001
I: 2020-05-15 07:06:48.215 Info Parameters
I: 2020-05-15 07:06:48.215     Callsign: N6DOZ
I: 2020-05-15 07:06:48.384 DMR RF Parameters
I: 2020-05-15 07:06:48.384     Id: 3150692
I: 2020-05-15 07:06:48.384     Color Code: 1
M: 2020-05-15 07:06:48.384 DMR, Opening INI file: DVSwitch.ini
M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] Address -> 127.0.0.1
M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] TXPort -> 32100
M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] RXPort -> 32103
M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] Slot -> 1
M: 2020-05-15 07:06:48.385 DMR, Transmitting on 127.0.0.1:32100 and listening on port 32103.  Result = 1
M: 2020-05-15 07:06:48.385 MMDVM_Bridge-20191105_V1.4.1 is running
I: 2020-05-15 07:06:48.385 Started the DMR Id lookup reload thread
M: 2020-05-15 07:07:08.405 DMR, Logged into the master successfully
M: 2020-05-15 07:07:08.405 DMR, Remote CMD: txTg=4000
M: 2020-05-15 07:07:08.405 DMR, Tune: id=3150692, tg=4000, mode=Group
M: 2020-05-15 07:07:08.405 DMR, Remote CMD: txTg=4001
M: 2020-05-15 07:07:08.405 DMR, Tune: id=3150692, tg=4001, mode=Group
M: 2020-05-15 07:07:08.456 DMR Slot 2, received network voice header from N6DOZ to TG 9
M: 2020-05-15 07:07:08.461 DMR Slot 2, received network end of voice transmission, 0.1 seconds, 0% packet loss, BER: 0.0%
M: 2020-05-15 07:12:26.479 DMR, TX state = ON
I: 2020-05-15 07:12:26.479 DMR, Begin TX: src=3135404 rpt=0 dst=311620 slot=1 cc=0 metadata=N6DOZ
M: 2020-05-15 07:12:30.077 DMR, TX state = OFF, DMR frame count was 62 frames
M: 2020-05-15 07:12:33.743 DMR Slot 2, received network voice header from N6DOZ to TG 9
M: 2020-05-15 07:12:37.402 DMR Slot 2, received network end of voice transmission, 3.9 seconds, 1% packet loss, BER: 0.0%
M: 2020-05-15 07:12:46.739 DMR Slot 2, received network voice header from N6DOZ to TG 9
M: 2020-05-15 07:12:49.226 DMR Slot 2, received network end of voice transmission, 3.1 seconds, 11% packet loss, BER: 0.0%
M: 2020-05-15 07:13:15.060 Closing the MMDVM
I: 2020-05-15 07:13:15.417 Stopped the DMR Id lookup reload thread
M: 2020-05-15 07:13:15.418 DMR, Closing DMR Network
I: 2020-05-15 07:13:15.418 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Rudy N6DOZ
 
Edited

Steve, I apologize, I believe I did post the same log twice.

I'm going to try again and emulating you by only providing the important lines. Third time's a charm? :p


MB_BM

I: 2020-05-15 07:06:45.626 MMDVM_Bridge:

I: 2020-05-15 07:06:45.626 Portions Copyright (C) 2018 DVSwitch, INAD.

I: 2020-05-15 07:06:45.626 Hacks by Mike N4IRR and Steve N4IRS

I: 2020-05-15 07:06:45.626 =-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-

I: 2020-05-15 07:06:45.626 This software is for use on amateur radio networks only,

I: 2020-05-15 07:06:45.626 it is to be used for educational purposes only. Its use on

I: 2020-05-15 07:06:45.626 commercial networks is strictly prohibited.

I: 2020-05-15 07:06:45.626 Copyright(C) 2015-2018 by Jonathan Naylor, G4KLX and others

M: 2020-05-15 07:06:45.626 MMDVM_Bridge-20191105_V1.4.1 is starting

M: 2020-05-15 07:06:45.626 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)

I: 2020-05-15 07:06:45.626 General Parameters

I: 2020-05-15 07:06:45.626     Callsign: N6DOZ

I: 2020-05-15 07:06:45.626     Id: 315069220

I: 2020-05-15 07:06:45.626     DMR: enabled

I: 2020-05-15 07:06:45.626 Display Parameters

I: 2020-05-15 07:06:45.626     Type: 

I: 2020-05-15 07:06:45.626 DMR Network Parameters

I: 2020-05-15 07:06:45.626     Address: 3103.repeater.net

I: 2020-05-15 07:06:45.626     Port: 62031

I: 2020-05-15 07:06:45.626     Local: 62044

I: 2020-05-15 07:06:45.626     Slot 1: disabled

I: 2020-05-15 07:06:45.626     Slot 2: enabled

I: 2020-05-15 07:06:45.628 Info Parameters

I: 2020-05-15 07:06:45.628     Callsign: N6DOZ

I: 2020-05-15 07:06:45.807 DMR RF Parameters

I: 2020-05-15 07:06:45.807     Id: 315069220

I: 2020-05-15 07:06:45.807     Color Code: 1

M: 2020-05-15 07:06:45.807 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] TXPort -> 32103

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] RXPort -> 32100

M: 2020-05-15 07:06:45.808 DMR, Setting [DMR] Slot -> 1

M: 2020-05-15 07:06:45.808 DMR, Transmitting on 127.0.0.1:32103 and listening on port 32100.  Result = 1

M: 2020-05-15 07:06:45.808 MMDVM_Bridge-20191105_V1.4.1 is running

I: 2020-05-15 07:06:45.808 Started the DMR Id lookup reload thread

M: 2020-05-15 07:06:55.827 DMR, Logged into the master successfully

M: 2020-05-15 07:07:08.461 DMR, TX state = ON

I: 2020-05-15 07:07:08.461 DMR, Begin TX: src=3150692 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:07:08.466 DMR, TX state = OFF, DMR frame count was 2 frames

M: 2020-05-15 07:12:26.479 DMR Slot 2, received network voice header from N6DOZ to TG 311620

M: 2020-05-15 07:12:27.074 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-15 07:12:27.797 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-15 07:12:30.077 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 0% packet loss, BER: 0.0%

M: 2020-05-15 07:12:33.744 DMR, TX state = ON

I: 2020-05-15 07:12:33.744 DMR, Begin TX: src=3135404 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:12:37.402 DMR, TX state = OFF, DMR frame count was 64 frames

M: 2020-05-15 07:12:46.744 DMR, TX state = ON

I: 2020-05-15 07:12:46.744 DMR, Begin TX: src=3135404 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:12:49.231 DMR, TX state = OFF, DMR frame count was 45 frames

M: 2020-05-15 07:16:53.065 DMR, TX state = ON

I: 2020-05-15 07:16:53.065 DMR, Begin TX: src=3150692 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:16:53.070 DMR, TX state = OFF, DMR frame count was 2 frames

M: 2020-05-15 07:18:24.956 Closing the MMDVM

I: 2020-05-15 07:18:25.862 Stopped the DMR Id lookup reload thread

M: 2020-05-15 07:18:25.863 DMR, Closing DMR Network

I: 2020-05-15 07:18:25.863 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Steve N4IRS
 

I stripped these down to the important parts:
I bolded the important lines. In short:

Both instances of MB are transmitting on 32103
Both instances of MB are receiving on 32100

OR
You sent the same log twice
Look at the time stamps of each "log"


MB_XLX

I: 2020-05-15 07:06:45.626 MMDVM_Bridge:

M: 2020-05-15 07:06:45.626 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)

I: 2020-05-15 07:06:45.626 General Parameters

I: 2020-05-15 07:06:45.626     Callsign: N6DOZ

I: 2020-05-15 07:06:45.626     Id: 315069220

I: 2020-05-15 07:06:45.626     DMR: enabled

I: 2020-05-15 07:06:45.626 DMR Network Parameters

I: 2020-05-15 07:06:45.626     Address: 3103.repeater.net

I: 2020-05-15 07:06:45.626     Port: 62031

I: 2020-05-15 07:06:45.626     Local: 62044

I: 2020-05-15 07:06:45.626     Slot 1: disabled

I: 2020-05-15 07:06:45.626     Slot 2: enabled

I: 2020-05-15 07:06:45.628     Callsign: N6DOZ

M: 2020-05-15 07:06:45.629 DMR, Opening DMR Network

I: 2020-05-15 07:06:45.807 DMR RF Parameters

I: 2020-05-15 07:06:45.807     Id: 315069220

I: 2020-05-15 07:06:45.807     Color Code: 1

M: 2020-05-15 07:06:45.807 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] TXPort -> 32103

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] RXPort -> 32100

M: 2020-05-15 07:06:45.808 DMR, Setting [DMR] Slot -> 1

M: 2020-05-15 07:06:45.808 DMR, Transmitting on 127.0.0.1:32103 and listening on port 32100.  Result = 1

M: 2020-05-15 07:06:45.808 MMDVM_Bridge-20191105_V1.4.1 is running

M: 2020-05-15 07:06:55.827 DMR, Logged into the master successfully

M: 2020-05-15 07:07:08.461 DMR, TX state = ON

I: 2020-05-15 07:07:08.461 DMR, Begin TX: src=3150692 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:07:08.466 DMR, TX state = OFF, DMR frame count was 2 frames

M: 2020-05-15 07:12:26.479 DMR Slot 2, received network voice header from N6DOZ to TG 311620

M: 2020-05-15 07:12:27.074 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-15 07:12:27.797 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-15 07:12:30.077 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 0% packet loss, BER: 0.0%

M: 2020-05-15 07:12:33.744 DMR, TX state = ON

I: 2020-05-15 07:12:33.744 DMR, Begin TX: src=3135404 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:12:37.402 DMR, TX state = OFF, DMR frame count was 64 frames

M: 2020-05-15 07:12:46.744 DMR, TX state = ON

I: 2020-05-15 07:12:46.744 DMR, Begin TX: src=3135404 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:12:49.231 DMR, TX state = OFF, DMR frame count was 45 frames

M: 2020-05-15 07:16:53.065 DMR, TX state = ON

I: 2020-05-15 07:16:53.065 DMR, Begin TX: src=3150692 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:16:53.070 DMR, TX state = OFF, DMR frame count was 2 frames

M: 2020-05-15 07:18:24.956 Closing the MMDVM

I: 2020-05-15 07:18:25.862 Stopped the DMR Id lookup reload thread

M: 2020-05-15 07:18:25.863 DMR, Closing DMR Network

I: 2020-05-15 07:18:25.863 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT

#################################################################################

MB_BM

I: 2020-05-15 07:06:45.626 MMDVM_Bridge:

M: 2020-05-15 07:06:45.626 MMDVM_Bridge-20191105_V1.4.1 is starting

M: 2020-05-15 07:06:45.626 Built 14:38:14 Nov 11 2019 (GitID #9dae1ac)

I: 2020-05-15 07:06:45.626 General Parameters

I: 2020-05-15 07:06:45.626     Callsign: N6DOZ

I: 2020-05-15 07:06:45.626     Id: 315069220

I: 2020-05-15 07:06:45.626     DMR: enabled

I: 2020-05-15 07:06:45.626 DMR Network Parameters

I: 2020-05-15 07:06:45.626     Address: 3103.repeater.net

I: 2020-05-15 07:06:45.626     Port: 62031

I: 2020-05-15 07:06:45.626     Local: 62044

I: 2020-05-15 07:06:45.626     Slot 1: disabled

I: 2020-05-15 07:06:45.626     Slot 2: enabled

I: 2020-05-15 07:06:45.628 Info Parameters

I: 2020-05-15 07:06:45.628     Callsign: N6DOZ

M: 2020-05-15 07:06:45.629 DMR, Opening DMR Network

I: 2020-05-15 07:06:45.807 DMR RF Parameters

I: 2020-05-15 07:06:45.807     Id: 315069220

I: 2020-05-15 07:06:45.807     Color Code: 1

M: 2020-05-15 07:06:45.807 DMR, Opening INI file: DVSwitch.ini

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] Address -> 127.0.0.1

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] TXPort -> 32103

M: 2020-05-15 07:06:45.807 DMR, Setting [DMR] RXPort -> 32100

M: 2020-05-15 07:06:45.808 DMR, Setting [DMR] Slot -> 1

M: 2020-05-15 07:06:45.808 DMR, Transmitting on 127.0.0.1:32103 and listening on port 32100.  Result = 1

M: 2020-05-15 07:06:45.808 MMDVM_Bridge-20191105_V1.4.1 is running

M: 2020-05-15 07:06:55.827 DMR, Logged into the master successfully

M: 2020-05-15 07:07:08.461 DMR, TX state = ON

I: 2020-05-15 07:07:08.461 DMR, Begin TX: src=3150692 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:07:08.466 DMR, TX state = OFF, DMR frame count was 2 frames

M: 2020-05-15 07:12:26.479 DMR Slot 2, received network voice header from N6DOZ to TG 311620

M: 2020-05-15 07:12:27.074 DMR Talker Alias (Data Format 1, Received 6/10 char): 'N6DOZ '

M: 2020-05-15 07:12:27.797 DMR Talker Alias (Data Format 1, Received 10/10 char): 'N6DOZ Rudy'

M: 2020-05-15 07:12:30.077 DMR Slot 2, received network end of voice transmission, 3.7 seconds, 0% packet loss, BER: 0.0%

M: 2020-05-15 07:12:33.744 DMR, TX state = ON

I: 2020-05-15 07:12:33.744 DMR, Begin TX: src=3135404 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:12:37.402 DMR, TX state = OFF, DMR frame count was 64 frames

M: 2020-05-15 07:12:46.744 DMR, TX state = ON

I: 2020-05-15 07:12:46.744 DMR, Begin TX: src=3135404 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:12:49.231 DMR, TX state = OFF, DMR frame count was 45 frames

M: 2020-05-15 07:16:53.065 DMR, TX state = ON

I: 2020-05-15 07:16:53.065 DMR, Begin TX: src=3150692 rpt=0 dst=9 slot=1 cc=0 metadata=N6DOZ

M: 2020-05-15 07:16:53.070 DMR, TX state = OFF, DMR frame count was 2 frames

M: 2020-05-15 07:18:24.956 Closing the MMDVM

I: 2020-05-15 07:18:25.862 Stopped the DMR Id lookup reload thread

M: 2020-05-15 07:18:25.863 DMR, Closing DMR Network

I: 2020-05-15 07:18:25.863 MMDVM_Bridge-20191105_V1.4.1 exited on receipt of SIGINT





Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Mike Zingman - N4IRR
 

That sucks. I will add an export talkgroup in the future so you no longer need to run through dmrgateway just to adjust the destination. 


Re: Bridging XLX to BM DMR (New Way 2020) #mmdvm_bridge

Rudy N6DOZ
 

Ernie,

So do you have your setup like this?

BM <-> DMRGateway <-> MB <-> MB <-> XLX?

I'll have to play with that setup.

Thanks for the tip. 7-3