On Dec 3, 2020, at 5:59 PM, Steve N4IRS <szingman@...> wrote:

 And what Master(s) are you connected to?

On 12/3/20 5:16 PM, Pete Fierro via groups.io wrote:

Why do I have to keep reloading my password sometimes?Seems good for a while then I have to reload it again. 

   Running two pi's analog to dmr bridge both passwords are the same in both as set in MMDVM. INI.

  I Followed the procedure in that website from Brandmeister to set a security password to the letter.

   I highlighted both dmr ids to set the security  password. 

  Ideas?

Pete

KD2ARB 

   

  

On Sun, Nov 29, 2020 at 18:32, Ted Lawrence via groups.io

<tedlaw2@...> wrote:

Yes, that fixed it.  Thanks!

Why do I have to keep reloading my password sometimes?Seems good for a while then I have to reload it again. 

   Running two pi's analog to dmr bridge both passwords are the same in both as set in MMDVM. INI.

  I Followed the procedure in that website from Brandmeister to set a security password to the letter.

   I highlighted both dmr ids to set the security  password. 

  Ideas?

Pete

KD2ARB 

   

  

On Sun, Nov 29, 2020 at 18:32, Ted Lawrence via groups.io

<tedlaw2@...> wrote:

Yes, that fixed it.  Thanks!

Why do I have to keep reloading my password sometimes?Seems good for a while then I have to reload it again. 

   Running two pi's analog to dmr bridge both passwords are the same in both as set in MMDVM. INI.

  I Followed the procedure in that website from Brandmeister to set a security password to the letter.

   I highlighted both dmr ids to set the security  password. 

  Ideas?

Pete

KD2ARB 

   

  

On Sun, Nov 29, 2020 at 18:32, Ted Lawrence via groups.io

<tedlaw2@...> wrote:

Yes, that fixed it.  Thanks!

On Sun, Nov 29, 2020 at 18:32, Ted Lawrence via groups.io

<tedlaw2@...> wrote:

Yes, that fixed it.  Thanks!

what file should i put that in?

On 12/3/20, Mike KB8JNM <groupio@midnighteng.com> wrote:

check or insert this into the node conf

lnkactenable=0    ; inactivity timeout dis/enable

On 12/3/2020 1:52 PM, Jed Barton wrote:

dvswitch

On 12/3/20, Mike KB8JNM <groupio@midnighteng.com> wrote:

What is 'the client' ?

On 12/3/2020 1:22 PM, Jed Barton wrote:

so the connection to what ever node i have connect to is fine, it's
the connection between my client and my node is going away. Any
thoughts?

On 12/3/20, Corey Dean N3FE <n3fe@padmr.com> wrote:

I am a little confused. Is the connection to dvswitch and asl
disconnecting
or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

check or insert this into the node conf

lnkactenable=0    ; inactivity timeout dis/enable

On 12/3/2020 1:52 PM, Jed Barton wrote:

dvswitch

On 12/3/20, Mike KB8JNM <groupio@midnighteng.com> wrote:

What is 'the client' ?

On 12/3/2020 1:22 PM, Jed Barton wrote:

so the connection to what ever node i have connect to is fine, it's
the connection between my client and my node is going away. Any
thoughts?

On 12/3/20, Corey Dean N3FE <n3fe@padmr.com> wrote:

I am a little confused. Is the connection to dvswitch and asl
disconnecting
or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

dvswitch

On 12/3/20, Mike KB8JNM <groupio@midnighteng.com> wrote:

What is 'the client' ?

On 12/3/2020 1:22 PM, Jed Barton wrote:

so the connection to what ever node i have connect to is fine, it's
the connection between my client and my node is going away. Any
thoughts?

On 12/3/20, Corey Dean N3FE <n3fe@padmr.com> wrote:

I am a little confused. Is the connection to dvswitch and asl
disconnecting
or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

What is 'the client' ?

On 12/3/2020 1:22 PM, Jed Barton wrote:

so the connection to what ever node i have connect to is fine, it's
the connection between my client and my node is going away. Any
thoughts?

On 12/3/20, Corey Dean N3FE <n3fe@padmr.com> wrote:

I am a little confused. Is the connection to dvswitch and asl
disconnecting
or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

so the connection to what ever node i have connect to is fine, it's
the connection between my client and my node is going away. Any
thoughts?

On 12/3/20, Corey Dean N3FE <n3fe@padmr.com> wrote:

I am a little confused. Is the connection to dvswitch and asl disconnecting
or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

I am a little confused. Is the connection to dvswitch and asl disconnecting
or dvswitch to whatever you are connecting to?

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

On Dec 3, 2020, at 11:08 AM, Jed Barton <jedbarton@gmail.com> wrote:

Hey guys, Hoping someone cn help. So i have my node setup so i can
connect through dv switch. OK cool, it works. What i notice, after
being connected for a few minutes, it times out, and i have to
re-connect. Is this normal, can it be fixed? I'd like to leave it
connected without having to change this all the time. Any thoughts?

Cheers,

Jed

On Dec 3, 2020, at 2:08 AM, EA5GVK Joaquin <ea5gvk@...> wrote:



Yes, we are working on it. In the next version it will be possible on any platform.
Greetings.

El jue, 3 dic 2020 a las 1:17, <Iz8thd@...> escribió:

Hi, I'm a DVLink user, is there a way to load the aforementioned software on a VPS?

 

Thanks and congratulations for the work done for the DVSwitch and DVLink!

Haha, any ideas of what we should do? I know it's connecting, but it
just speaks node number 1998, then disconnects.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:

I have seen this way too often. HAMVOIP is stupid. They hard code node
number 1998 rather then using a variable. This forces the user to edit
the stanza rather then a simple variable. For a system that claims to be
smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:

roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:

I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed

Not trying to pile on,

It would help to use a pre built form asking OS & ver and ASL/hamvoip and pi/pc/vps

I am sure we have all lost a lot of time helping down a road to nowhere from not having that info.

On 12/2/2020 9:25 PM, Steve N4IRS wrote:

I have seen this way too often. HAMVOIP is stupid. They hard code node number 1998 rather then using a variable. This forces the user to edit the stanza rather then a simple variable. For a system that claims to be smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:

roger that.  stand by.  we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:

I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node.  So when he connects, it just says node
1998.  What does he need to do?  I forgot?
The voice speaks node number 1998.
Cheers,

Jed

I have seen this way too often. HAMVOIP is stupid. They hard code node number 1998 rather then using a variable. This forces the user to edit the stanza rather then a simple variable. For a system that claims to be smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:

roger that.  stand by.  we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:

I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node.  So when he connects, it just says node
1998.  What does he need to do?  I forgot?
The voice speaks node number 1998.
Cheers,

Jed

I have seen this way too often. HAMVOIP is stupid. They hard code node
number 1998 rather then using a variable. This forces the user to edit
the stanza rather then a simple variable. For a system that claims to be
smarter then ASL, not so much.

In my not so humble opinion.

Steve N4IRS

On 12/2/20 9:20 PM, Jed Barton wrote:

roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:

I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed

roger that. stand by. we'll take a look. just wasn't sure if it was
something in the node itself.

On 12/2/20, Steve N4IRS <szingman@msgstor.com> wrote:

I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed

I assume it HAMVOIP. This is from them
<https://hamvoip.org/howto/iaxrpt-config.pdf> Start at page 6.

On 12/2/20 9:02 PM, Jed Barton wrote:

Hey guys,

Trying to help my friend setup his dvswitch client on android to
connect to his allstar node. So when he connects, it just says node
1998. What does he need to do? I forgot?
The voice speaks node number 1998.
Cheers,

Jed