Date   

Re: P25 Only Connecting to Some TG's

Adrian Fewster <vk4tux@...>
 

You need to update P25Gateway to include the all TG voice file support by G4KLX. Before that only 10xxx TG's were announced.

On 20/12/19 11:20 am, Tom Corcoran wrote:
Why do some TG's identify when a "connection" is made and others do not? Disconnect message works for all TG's.
--
Tom VE3NY


Re: P25 Only Connecting to Some TG's

Tom Corcoran
 

Why do some TG's identify when a "connection" is made and others do not? Disconnect message works for all TG's.
--
Tom VE3NY


Re: P25 Only Connecting to Some TG's

Adrian Fewster <vk4tux@...>
 

Ok, on that, the fact you could connect 10200 meant that your hostfile path in ini was already correct, only the content could be the cause.

On 20/12/19 5:01 am, Tom Corcoran wrote:
Solved. I thought that if TG was in drop-down, it was also entered into the appropriate .ini files. Now that I know, I will inter others. tnx for speedy response Steve and Adrian.
--
Tom VE3NY


Re: P25 Only Connecting to Some TG's

Tom Corcoran
 

Solved. I thought that if TG was in drop-down, it was also entered into the appropriate .ini files. Now that I know, I will inter others. tnx for speedy response Steve and Adrian.
--
Tom VE3NY


Re: P25 Only Connecting to Some TG's

Steve N4IRS
 

Check you P25Host.ini file
You will find the pointer in P25Gateway.ini

Steve

On 12/19/2019 1:02 PM, Tom Corcoran wrote:
I am able to qso on some P25 TG's - e.g. 10200, 10200 … but not others … e.g. 3023, 420, 28299. Any advice?? 
--
Tom VE3NY


Re: P25 Only Connecting to Some TG's

Adrian Fewster <vk4tux@...>
 

Have you compared your P25 Host file to https://github.com/g4klx/P25Clients/blob/master/P25Gateway/P25Hosts.txt  ?

If the TG (Reflector) is not in your P25Hosts.txt, you wont connect, on that TG selection.

On 20/12/19 4:02 am, Tom Corcoran wrote:
I am able to qso on some P25 TG's - e.g. 10200, 10200 … but not others … e.g. 3023, 420, 28299. Any advice?? 
--
Tom VE3NY


P25 Only Connecting to Some TG's

Tom Corcoran
 

I am able to qso on some P25 TG's - e.g. 10200, 10200 … but not others … e.g. 3023, 420, 28299. Any advice?? 
--
Tom VE3NY


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Peter Buckley <SkierInAvon@...>
 

Looking forward to the English version.
Downloaded the current (Spanish) version...ran it on the Pi.
Looks good, wish I knew more Spanish...
Thanks for your efforts - N0ECT - Pensacola.

On Thursday, September 12, 2019, 3:18:01 AM CDT, EA5GVK Joaquin <ea5gvk@...> wrote:


Good morning, I have made an image for raspberry that contains guided menu script to configure dvswitch server and I have also set up an hblink3 server and its hbmonitor.
The news link is this -> http://ea5gvk-dmr.zigor.es
And the link to download the image is this -> https://mega.nz/#!z4wXxKBK!O9BVLKzWXX88yJ7ODAhqCIYBNkgz4-p8fNkkAC2Y6Wk

Thanks to the entire Dvswitch team. Always grateful


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

EA5GVK Joaquin
 

No. Have Amy problem with mega?


El jue., 19 dic. 2019 0:25, Richard (Joseph) VE2DJE <ve2dje@...> escribió:
Is your image available elsewhere than mega.nz ????

Le mer. 18 déc. 2019 5 h 28 a.m., Josep <ea3abn@...> a écrit :



Enviado desde mi dispositivo Samsung


-------- Mensaje original --------
De: EA5GVK Joaquin <ea5gvk@...>
Fecha: 17/12/2019 20:33 (GMT+01:00)
Para: main@DVSwitch.groups.io
Asunto: Re: [DVSwitch] Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

f5nxg
 

Bonjour à  tous,

Merci pour cette nouvelle image et tout le travail fourni.
Installé ici et cela fonctionne parfaitement.
Félicitations à tout le groupe.
73's Jean-Louis F5NXG


Thank you for this new image and all the work provided.
Installed here and it works perfectly.
Congratulations
73’s Jean-Louis F5NXG

Le 17/12/2019 à 20:33, EA5GVK Joaquin a écrit :

NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.



Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

F/W3PO
 

Joaquin muchas gracias,
Just installed it and it works very well.
Thanks to you and the group for a great release.
73 de Pat W3PO in the Philippines for the winter quarters. Aahhhh sunshine.


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

 

Is your image available elsewhere than mega.nz ????


Le mer. 18 déc. 2019 5 h 28 a.m., Josep <ea3abn@...> a écrit :



Enviado desde mi dispositivo Samsung


-------- Mensaje original --------
De: EA5GVK Joaquin <ea5gvk@...>
Fecha: 17/12/2019 20:33 (GMT+01:00)
Para: main@DVSwitch.groups.io
Asunto: Re: [DVSwitch] Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Josep
 

Avionica@...



Enviado desde mi dispositivo Samsung


-------- Mensaje original --------
De: EA5GVK Joaquin <ea5gvk@...>
Fecha: 17/12/2019 20:33 (GMT+01:00)
Para: main@DVSwitch.groups.io
Asunto: Re: [DVSwitch] Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Bruno
 

Bonjour et merci pour cette nouvelle image.

73's
F1PTL Bruno

Le mar. 17 déc. 2019 à 20:33, EA5GVK Joaquin <ea5gvk@...> a écrit :
NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.


--
Hello everyone,
I want to set up a Link between HBLink and a room Wires-X from Yeasu in C4FM. Is there a possibility to set up the type of editing.
73 to all.
F1PTL Bruno


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

Jim Lathan
 

Thank you for the update, would be possible to get an English version of the manual posted?


On Tue, Dec 17, 2019 at 2:33 PM EA5GVK Joaquin <ea5gvk@...> wrote:
NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.


Re: Image for Raspberry pi3 with Debian 10 Buster with DVSWICTH SERVER, HBLINK3 AND HBMONITOR.

EA5GVK Joaquin
 

NEW IMAGE V.5 SERVER DVSWITCH AND HBLINK WITH HBMONITOR SP2ONG WORKING PERFECTLY.

NOVELTY
DVSWITCH WITH MULTIUSER
GUIDED MENU TO CONFIGURE HBLINK ALSO.
MORE INFO: http://ea5gvk-dmr.zigor.es/2019/12/17/v-5-imagen-dvswitch-y-hblink-blasmakers-bautizada-dvlink-llega-para-quedarse/

MANUAL DONWLOAD: https://mega.nz/#!PphSlI5S!IofiJLwvBBsdCe-AQR1xwmPbAFxobKDyrXbOcQBNdG4

DONWLOAD IMAGE: https://mega.nz/#!OgQTzAqL!sZI6Iw1_V8s_ZdfRkydIvBzhrmEfB8QNhyIoDUalyww

FOR NOW IN SPANISH. WE ARE WORKING FOR MORE LANGUAGES.


Re: Error code help #dmrlink

Cort N0MJS
 

IPSC was reverse engineered. There’s way more I don’t know about it than what I do. Mostly I figured it out by brute force, and a few folks stepped up in the early days with nuggets of info that helped. There’s going to be a lot about it we don’t ever know.

I’d recommend simply trying to change the password, flip the master/peer relationship, strip down to the basics in the subscribers and if applicable, the repeater (no enhanced channel access, tx interrupt, etc) and start from there.

On Dec 17, 2019, at 6:08 AM, KK4zmg <kk4zmg@...> wrote:

Weird. Well we're going to swap the machine for a known good one. Going to do more testing in the home lab than the repeater site.

On Tue, Dec 17, 2019, 7:05 AM Cort N0MJS via Groups.Io <n0mjs=me.com@groups.io> wrote:
Looks like all of the packets from the incoming voice stream are failing as authentication. I’d never seen a case like that previously, where the link establishment ones pass, but the voice stream doesn’t.

I don’t have even a single MOTOTRBO repeater anymore. When I sold the last one was when I stopped developing DMRlink.

Could be some fluke with the password, some extra Motorola gratuitous feature enabled, or if you’re running the latest firmware, I suppose they might have changed IPSC somehow.


On Dec 16, 2019, at 7:24 PM, KK4ZMG Richard via Groups.Io <kk4zmg=yahoo.com@groups.io> wrote:

no there will be more depending on length. scrolling about the same speed as import_datagrammReceived when it is repeating a transmission from HB_Bridge.



Cort Buffington
785-865-7206


Re: HBlink2 ACL problem #hblink

Kim-Benjamin Lütkemeier
 

Ok thank u, i will check hblink3

Von meinem iPhone gesendet

Am 16.12.2019 um 14:48 schrieb Cort N0MJS via Groups.Io <n0mjs@...>:

The only active branch of HBlink that is supported is the HB_Bridge branch. The repo is mainlined for that branch, and for historical purposes. Please move to HBlink3 for all uses other than the HB_Bridge branch and the use of HB_Bridge.py.

On Dec 16, 2019, at 12:21 AM, Kim-Benjamin Lütkemeier via Groups.Io <kbluetkemeier@...> wrote:

[Edited Message Follows]

Hello guys,

I downloaded the actual hblink version from github. 

on this version I find some big modifications about ACL on my old Version I have a ACL rules file.

Now my problem is when I make a radio check it is not working hblink drop this call

I try with clobal ACL fale and from master false but then I have probleme that

on class HBSYSTEM(DatagramProtocol):
_laststrid is not defined

on  class OPENBRIDGE(DatagramProtocol):

but the i receive
CALL DROPPED WITH STREAM ID xxxx ON TGID 0 BY GLOBAL TS2 ACL

but in the config is ACL on True and the other options on permit:ALL

Everything is working but not Radio Check / Alarm Call / Messages

on the old version it was working

maybe someone can help me

UPDATE:
One Probleme but i dont know why

line 347
if self._CONFIG['GLOBAL']['USE_ACL']:
                    print("Jump Inside: ",self._CONFIG['GLOBAL']['USE_ACL']) 
                    if not acl_check(_rf_src, self._CONFIG['GLOBAL']['SUB_ACL']):
                        if self._laststrid != _stream_id:
                            logger.info('(%s) CALL DROPPED WITH STREAM ID %s FROM SUBSCRIBER %s BY GLOBAL ACL', self._system, int_id(_stream_id), int_id(_rf_src))
                            if _slot == 1:
                                self._laststrid1 = _stream_id
                            else:
                                self._laststrid2 = _stream_id
                        return
                    if _slot == 1 and not acl_check(_dst_id, self._CONFIG['GLOBAL']['TG1_ACL']):
                        if self._laststrid1 != _stream_id:
                            logger.info('(%s) CALL DROPPED WITH STREAM ID %s ON TGID %s BY GLOBAL TS1 ACL', self._system, int_id(_stream_id), int_id(_dst_id))
                            self._laststrid1 = _stream_id
                        return
                    if _slot == 2 and not acl_check(_dst_id, self._CONFIG['GLOBAL']['TG2_ACL']):
                        if self._laststrid2 != _stream_id:
                            logger.info('(%s) CALL DROPPED WITH STREAM ID %s ON TGID %s BY GLOBAL TS2 ACL', self._system, int_id(_stream_id), int_id(_dst_id))
                            print(acl_check(_dst_id, self._CONFIG['GLOBAL']['TG2_ACL']))
                            self._laststrid2 = _stream_id
                        return

Why he jump inside : if self._CONFIG['GLOBAL']['USE_ACL']:
i try it with False and True
print("Jump Inside: ",self._CONFIG['GLOBAL']['USE_ACL']) 

I have no Idea

73, Kim DO1KBL

Cort Buffington
785-865-7206


Re: Error code help #dmrlink

KK4zmg
 

Weird. Well we're going to swap the machine for a known good one. Going to do more testing in the home lab than the repeater site.


On Tue, Dec 17, 2019, 7:05 AM Cort N0MJS via Groups.Io <n0mjs=me.com@groups.io> wrote:
Looks like all of the packets from the incoming voice stream are failing as authentication. I’d never seen a case like that previously, where the link establishment ones pass, but the voice stream doesn’t.

I don’t have even a single MOTOTRBO repeater anymore. When I sold the last one was when I stopped developing DMRlink.

Could be some fluke with the password, some extra Motorola gratuitous feature enabled, or if you’re running the latest firmware, I suppose they might have changed IPSC somehow.


On Dec 16, 2019, at 7:24 PM, KK4ZMG Richard via Groups.Io <kk4zmg=yahoo.com@groups.io> wrote:

no there will be more depending on length. scrolling about the same speed as import_datagrammReceived when it is repeating a transmission from HB_Bridge.


Re: Error code help #dmrlink

Cort N0MJS
 

Looks like all of the packets from the incoming voice stream are failing as authentication. I’d never seen a case like that previously, where the link establishment ones pass, but the voice stream doesn’t.

I don’t have even a single MOTOTRBO repeater anymore. When I sold the last one was when I stopped developing DMRlink.

Could be some fluke with the password, some extra Motorola gratuitous feature enabled, or if you’re running the latest firmware, I suppose they might have changed IPSC somehow.


On Dec 16, 2019, at 7:24 PM, KK4ZMG Richard via Groups.Io <kk4zmg@...> wrote:

no there will be more depending on length. scrolling about the same speed as import_datagrammReceived when it is repeating a transmission from HB_Bridge.