Date   

Re: #analog_bridge #dmrlink #mmdvm_bridge #analog_bridge #dmrlink #mmdvm_bridge

Don Poaps
 

Update: 

I tried connecting using my in-house IP address directly to the DV Switch PI. It doesn't connect. My IAX does connect to my main Hamvoip AllstarLink Node.

I'm clueless when it comes to this. 

73

Don va7dgp


Re: installing on other ARM platforms other than raspberry #best_practices

Steve N4IRS
 

Answers inline below.

On 12/15/2020 6:57 AM, fabiobassa wrote:

Hello everyone, I am an Italian HAM iz8xoh and is since few time that I'm experimenting on this fronteer of interconnecting different nodes on different technologies.

Have realized that for everybody ' s easy use most things are "raspberry concentric" since of course this is the easisest approach , and reproducibility is quite assured. But together with some talented people we achieved the goal to port linux ( armbian in particular) even on cheap platforms such as tvboxes.

DVSwitch is in no way Raspberry centric. We support i386, AMD64, armhf and ARM64 binaries. We test on a variety of systems. For ARM processors, we test on Armbian. I have run the DVSwitch programs on H2 - H5 and Samsung processors. Armbian happens to be one of my favorite distributions. You can install DVSwitch Server on Armbian now, see <https://github.com/DVSwitch/DVSwitch-System-Builder>  

Some of those boards are armhf with up to 2 giga ram/16giga rom , some others are aarch64 up to 4gb ram,  so even much more powerfull.

Actually compiled mmdvmhost and mmdvmcal on rockchip rk322x platform and planning to check on old amlogic 805 .

If you can run MMDVMHost, you should be able to run the DVSwitch programs and the support programs

mmdvmhost and mmdvmcal  both are fully functional on rockchip armhf  and registered on Italy BM server. But my goal would be port on those cheap boards even all the suite such as mmdvm_bridge and also md380_emulator and ASL until the board can support it or split across diffferent boards and join them in lan network.

Regarding  about md380_emu  I have learned  that some instruction are " kernel" sensitive and platform tested are some allwinner ( h2 h3) .So now come questions:

1) why are very platform dependant ? Is some feautures needed to be implemented in make config of kernel or are HARDWARE related ( hw acceleration, real time kernel ) ?

We uses qemu to provide a "abstraction layer" to allow md380-emu to run everywhere we have tested.

2) any info about building from scratch is higly appreciated, maybe step by step to check functionality. E.G. for beginning would be great have the mmdvm hotspot hat ( single antenna-single slot chinese clone ) running with  his mmdvmhost and trying to decode the audio pipeing to a usb soundcard .Then step by step adding modules for ad hoc network or bm connected in a soft learning curve .

There is no reason to "build from scratch" since the DVSwitch Programs should run on your hosts now. DVSwitch is not trying to be everything to all people. If you want to include the DVSwitch programs in you project, you are welcome to do so.

Once the system have a great releabilty of course will be made a disclosure of these results giving credits to all owners of respective githubs projects !

Thank you in advance, 73' s iz8xoh


73 and good luck on your project.
Steve N4IRS

 



installing on other ARM platforms other than raspberry #best_practices

fabiobassa
 

Hello everyone, I am an Italian HAM iz8xoh and is since few time that I'm experimenting on this fronteer of interconnecting different nodes on different technologies.

Have realized that for everybody ' s easy use most things are "raspberry concentric" since of course this is the easisest approach , and reproducibility is quite assured. But together with some talented people we achieved the goal to port linux ( armbian in particular) even on cheap platforms such as tvboxes.

Some of those boards are armhf with up to 2 giga ram/16giga rom , some others are aarch64 up to 4gb ram,  so even much more powerfull.

Actually compiled mmdvmhost and mmdvmcal on rockchip rk322x platform and planning to check on old amlogic 805 .

mmdvmhost and mmdvmcal  both are fully functional on rockchip armhf  and registered on Italy BM server. But my goal would be port on those cheap boards even all the suite such as mmdvm_bridge and also md380_emulator and ASL until the board can support it or split across diffferent boards and join them in lan network.

Regarding  about md380_emu  I have learned  that some instruction are " kernel" sensitive and platform tested are some allwinner ( h2 h3) .So now come questions:

1) why are very platform dependant ? Is some feautures needed to be implemented in make config of kernel or are HARDWARE related ( hw acceleration, real time kernel ) ?

2) any info about building from scratch is higly appreciated, maybe step by step to check functionality. E.G. for beginning would be great have the mmdvm hotspot hat ( single antenna-single slot chinese clone ) running with  his mmdvmhost and trying to decode the audio pipeing to a usb soundcard .Then step by step adding modules for ad hoc network or bm connected in a soft learning curve .

Once the system have a great releabilty of course will be made a disclosure of these results giving credits to all owners of respective githubs projects !

Thank you in advance, 73' s iz8xoh

 


#analog_bridge #dmrlink #mmdvm_bridge #analog_bridge #dmrlink #mmdvm_bridge

Don Poaps
 

I finally got all my nodes green. I have 530782 setups on my DV Switch PI.
Are there simple documents showing how to connect via the main node to the DV switch Node. I'm using analog ht being heard by my Kenwood V71. I like to be able to use the HT or the IAX Phone on my Windows or my Cell phone. The audio some goes to the dvswitch out DMR or D Star. 
On the DVswitch, I have answered all the DMR and D-Star answers as far as a password, etc. 
73
Don 


Re: Followup on Network Watchdog timeout message FCS to DMR bridge

David Young
 

Steve,
Yes, success!!!
Works perfectly.  On you install instructions,  a note:
Installing the new MMDVM_Bridge module, just doing the systemctl stop command and replacing the existing MMDVM_Bridge module and restarting using systemctl start, did not fix the problem although the module did restart.  I needed to reboot the server and restart from cold and that then did the trick and all works now.  I had to also do a:  chmod +x MMDVM_Bridge, to get my script to execute without a permission denied error.

Thanks much Steve, I've been struggling with this for some time.
--
Dave WB6DTB


Re: Bridge

ibjosh1985@...
 

i cant find where to put the dstar reflector information at


Re: Bridge

ibjosh1985@...
 

where is a link that will show me how to configure the other's like p25 and dstar      my dstar reflector is xlx337 will that work


Re: Bridge

ibjosh1985@...
 

hey hey i got dmr to work i see activity now to get the rest of them solved and i'll be good to go


Re: Bridge

ibjosh1985@...
 

oh wait never mind elite


Re: Bridge

ibjosh1985@...
 

ok explain that to me


Re: Bridge

 

On 15/12/20 3:20 am, Steve N4IRS wrote:
If you run it on UDP port 31337, you can be leetx2 or confused for
Back Orifice.
Haha, now there's something I haven't seen for years. :)

--
73 de Tony VK3JED/VK3IRL
http://vkradio.com


Re: Bridge

ibjosh1985@...
 

ok we will setup my wife's dmr id i'll start editing everything real quick


Re: Bridge

Steve N4IRS
 

On 12/14/2020 3:07 PM, ibjosh1985@... wrote:
so basicly your saying just use my regular dmr ID not the repeater id from radioid


Re: Bridge

ibjosh1985@...
 

so basicly your saying just use my regular dmr ID not the repeater id from radioid


Re: Bridge

Steve N4IRS
 

You can't use thsame ID on more then one device.

On 12/14/2020 3:05 PM, ibjosh1985@... wrote:
using repeater ID


Re: Bridge

Steve N4IRS
 

Set it up as a hotspot.

On 12/14/2020 3:05 PM, ibjosh1985@... wrote:
using repeater ID


Re: Bridge

Steve N4IRS
 

Hotspot Configurations

Notice: Users connecting hotspots to BrandMeister USA Servers will be required have a Selfcare account and to set their hotspot security password. This will be rolled out over the next few weeks starting with BM3101 on Nov 27th. BM3102 will be Dec 4th and BM3103 on Dec 11th.



On 12/14/2020 3:03 PM, ibjosh1985@... wrote:
M: 2020-12-14 20:01:50.974 DMR, Opening DMR Network
E: 2020-12-14 20:02:01.216 DMR, Login to the master has failed, retrying network ...
M: 2020-12-14 20:02:01.216 DMR, Closing DMR Network


Re: Bridge

ibjosh1985@...
 

using repeater ID


Re: Bridge

ibjosh1985@...
 

here is the whole log file


Re: Bridge

Steve N4IRS
 

password correct? Did you set your hotspot password?

On 12/14/2020 3:03 PM, ibjosh1985@... wrote:
M: 2020-12-14 20:01:50.974 DMR, Opening DMR Network
E: 2020-12-14 20:02:01.216 DMR, Login to the master has failed, retrying network ...
M: 2020-12-14 20:02:01.216 DMR, Closing DMR Network

1781 - 1800 of 9595