Date   

Re: TG Listing in DVSwitch

Steve N4IRS
 



Disconnect from any active TG

root@omv:/opt/Analog_Bridge# ./dvswitch.sh collectProcessDataFiles
Processing NXDN
Processing P25
Processing DMR
Processing YSF
Processing DStar
Processing ASL

Notice the response from dvswitch.sh

Now, edit /tmp/DMR_node_list.txt here is the first 12 entries:

4000|||Unlink
1|||LOCAL
2|||LOCAL/CLUSTER
8|||REGIONAL
9|||LOCAL OR REFLECTOR
91|||WORLD-WIDE
92|||EUROPE
93|||NORTH AMERICA
94|||ASIA MIDDLE EAST
95|||AUSTRALIA NEW ZELAND
202|||
204|||NEDERLAND

I edited:
8|||REGIONAL

To:
3112138|||N4IRS was here

Make sure you have DVSM running and watch the screen.
Now run:
./dvswitch.sh pushfile /tmp/DMR_node_list.txt

This will show on the screen

You will get this on the DVSM screen:




Now look at the /var/log/dvswitch/Analog_Bridge.log
I: 2019-12-14 21:10:09.632 Asked to return file name /tmp/DMR_node_list.txt
I: 2019-12-14 21:10:09.632 File found, begin transfer
I: 2019-12-14 21:10:10.793 File transer complete.  227 packets sent

Analog_Bridge pushes the file to DVSM via UDP, so it really does not know if the file arrived. DVSM DOES check the received file.

73, Steve N4IRS







On 12/14/19 3:02 PM, Tom Corcoran wrote:
Could problem be MMDVM, DVS or DVSM release? dvswitch.sh seems to work fine with tune and mode.
--
Tom VE3NY


Re: TG Listing in DVSwitch

Tom Corcoran
 

Could problem be MMDVM, DVS or DVSM release? dvswitch.sh seems to work fine with tune and mode.
--
Tom VE3NY


Re: TG Listing in DVSwitch

Tom Corcoran
 

Tried making a simple change to the description of entry #2 - LOCAL to LOCAL1 and my android device displayed message : "File Transfer: File Not Found"
Did same to P25 list with same result. 

So .. progress but no cigar yet. Seems like I need to indicate some form of destination in the android device
--
Tom VE3NY


Re: TG Listing in DVSwitch

Tom Corcoran
 

sorry … misstated … I did (and have again) used "./dvswitch.sh collectProcessDataFiles" and then "./dvswitch.sh pushfile DMR_node_list.txt" 
Also made changes to TGList_BM.txt

Still no changes to TalkGroup list either name or TG#. 

--
Tom VE3NY


Re: TG Listing in DVSwitch

Jay Mazure
 

Steve / Tony,   Just want to let you know I have been following the email strings.   So far I don't have any luck either.
I'm not a Linux man but am trying hard.  

Steve,  could you send me a sample file via email of a talk group list.   If your busy no worries. 

73
Jay / WT8K




On Saturday, December 14, 2019, 10:07:09 AM PST, Tom Corcoran <tcorcoran@...> wrote:


files all loaded into /tmp. File I edited is DMR_node_list.txt  
made changes and then did ./dvswitch.sh DMR_node_list.txt

no changes to DVSM menu. Tried shutdown and rebooting of DVS and DVMS. No changes. Is there something else I should be entering?
--
Tom VE3NY


Re: TG Listing in DVSwitch

Steve N4IRS
 

"./dvswitch.sh pushfile file_name.txt"

On 12/14/2019 1:07 PM, Tom Corcoran wrote:
files all loaded into /tmp. File I edited is DMR_node_list.txt  
made changes and then did ./dvswitch.sh DMR_node_list.txt

no changes to DVSM menu. Tried shutdown and rebooting of DVS and DVMS. No changes. Is there something else I should be entering?
--
Tom VE3NY


Re: TG Listing in DVSwitch

Tom Corcoran
 

files all loaded into /tmp. File I edited is DMR_node_list.txt  
made changes and then did ./dvswitch.sh DMR_node_list.txt

no changes to DVSM menu. Tried shutdown and rebooting of DVS and DVMS. No changes. Is there something else I should be entering?
--
Tom VE3NY


Re: ASL Analog_Bridge and dvswitch.sh #analog_bridge

Steve N4IRS
 
Edited

Ed,
In thinking about you question, you can change audio levels. You will have scripts for each mode so, add:
dvswitch.sh tlvAudio gain {value} # Set AMBE audio gain
dvswitch.sh usrpAudio gain {value} # Set PCM audio gain

Where value is .1 to 10
1 = unity gain
2 = twice unity 
.5 half unity gain


Re: TG Listing in DVSwitch

Steve N4IRS
 

The command you asked about does all 3 steps. collect, Process and PushDataFiles

If you want to edit before you push then:
"./dvswitch.sh collectProcessDataFiles"
look in /tmp you will see a number of .txt files
You can edit one of those data files.
I suggest you leave thew first entry alone (disconnect)
edit the next 9 with your choice of entries. KEEP the same format!
"./dvswitch.sh pushfile file_name.txt"

Steve N4IRS


On 12/14/2019 10:37 AM, Tom Corcoran wrote:
Hello Steve,

but if I want to modify the TG list file, don't I have to indicate filename? I like Mike's suggestion of putting favorite TG's in top 10
--
Tom VE3NY


Re: TG Listing in DVSwitch

Tom Corcoran
 

Hello Steve,

but if I want to modify the TG list file, don't I have to indicate filename? I like Mike's suggestion of putting favorite TG's in top 10
--
Tom VE3NY


Re: TG Listing in DVSwitch

Steve N4IRS
 

Tom,
For this command, no file name required, no destination directory required. Make sure DVSM is connected to AB and run the command.

Steve N4IRS

On 12/14/19 8:45 AM, Tom Corcoran wrote:
Hello Mike,
to do this, do I use "./dvswitch.sh collectProcessPushDataFiles"? Do I just enter file name at end of this command? Is it necessary to enter the destination directory in DVSM (if there is one)"

tnx ... 
Tom VE3NY


Re: TG Listing in DVSwitch

Tom Corcoran
 

Hello Mike,
to do this, do I use "./dvswitch.sh collectProcessPushDataFiles"? Do I just enter file name at end of this command? Is it necessary to enter the destination directory in DVSM (if there is one)"

tnx ... 
Tom VE3NY


Re: Brandmeister to XLX

Steve N4IRS
 

Download from github.

On 12/13/2019 6:53 AM, Tom Corcoran wrote:
Ernie,

can i do apt-get update/upgrade for latest MMDVM_Bridge ... or must I download from github?

tnx ... Tom VE3NY


Re: TG Listing in DVSwitch

Mike Zingman - N4IRR
 

Jay,

You can upload any DMR database to the DVSM app by using the dvswitch.sh script.  The script has several commands that will aid you in this process including the download of the database from the internet, processing of that data into a form compatible with DVSM and upload of the processed file to the app.  

As to you desire to customize the database.  You can change it any way you want before you upload it.  One of the best way to customize it is to place your favorite talk groups in the first 10 locations of the file.  These first 10 locations are used as the "long press" dial macros you use on the keypad.  So, if you want your TG to be number five, place it in the fifth location and when you long press the 5 key on the keyboard it will automatically dial your favorite TG.

Hope this helps,
Mike N4IRR


Re: Brandmeister to XLX

Tom Corcoran
 

Ernie,

can i do apt-get update/upgrade for latest MMDVM_Bridge ... or must I download from github?

tnx ... Tom VE3NY


TG Listing in DVSwitch

Jay Mazure
 


Hello all,

I am new to DV Switch.   I installed the ap on my Samsung S7 and have a VM running Ubuntu.     Everything is working fine,  however I find the TG Listing 
awkward to be used.   As well I would like the option to add a TG if possible as well as making simple a simple TG list of what I mostly use.


I see these two items in Ubuntu for TGList:
1.  /usr/local/sbin/TGListUPdate.sh

2.. /var/liv/mmdvm/TGList.txt

For example I wanted to add TG5156 for the Philippines.   I thought it would be something simple like editing and making the change in the TGlist.txt file,   but that didn't work.  

Any help or advice greatly appreciated.  If this is being worked on else where or has been discussed elsewhere please advise.

73's
Jay Mazure / WT8K
DMR 3132283


Re: Hytera DMR Gateway

Chris K7AZ
 

Hi Jake, I am still following.  
Will try zero as you suggest.  
Was there a link to the video?

When I go to use transcoder after a several day unused period, I find I have to reboot the ASL system.  Have you heard of similiar ?   This is running on a VM platform.  

Thanks,
Chris K7AZ 



Sent from my Verizon, Samsung Galaxy smartphone


-------- Original message --------
From: Jake Litwin <litwinjwi@...>
Date: 12/9/19 20:43 (GMT-08:00)
To: main@DVSwitch.groups.io
Subject: Re: [DVSwitch] Hytera DMR Gateway

Hi Chris,

Not sure if you're still following this thread. Great video on this! I had a similar problem but found the solution. It's been working nicely.

DMRGateway.ini


[General]

Timeout=0  <----- Changed to Zero

 


Re: Hytera DMR Gateway

Jake Litwin
 

Hi Chris,

Not sure if you're still following this thread. Great video on this! I had a similar problem but found the solution. It's been working nicely.

DMRGateway.ini


[General]

Timeout=0  <----- Changed to Zero

 


Re: ASL Analog_Bridge and dvswitch.sh #analog_bridge

Steve N4IRS
 

Ed,
Not as of today, but it is planned for SOON.

Steve N4IRS

On 12/9/2019 12:56 PM, Ed W8VT wrote:
When changing digital modes via dvswitch.sh is there a way to set the audio levels for each mode. Not using DVSM with this installation.

Ed W8VT


ASL Analog_Bridge and dvswitch.sh #analog_bridge

Ed W8VT
 

When changing digital modes via dvswitch.sh is there a way to set the audio levels for each mode. Not using DVSM with this installation.

Ed W8VT