P25 reflector shows started . a ps ax | grep of P25Reflector shows nothing. If I look into the /var/log/P25Reflector I found this.. Any thoughts ? root@442-400Repeater:/var/log/mmdvm# cat P25Reflector

Thank you, looks like it running now excerpt from logg. I: 2018-04-22 20:00:47.485 Opening P25 network connection I: 2018-04-22 20:00:47.917 Loaded 89798 Ids to the callsign lookup table I: 2018-04-22

I have been working on a router configuration build out using 15.1 advanced Enterprise code. This is what I have used to link my Quantars repeaters without placing them on the P25NX system. Mike AE4ML

The config on the router will change and the raspberry Pi will be run a different set of programs. There will be no way to switch back and forth between the P25NX and the DVSwitch systems. Mike AE4ML

I decided to look at the log files. Everything appears to be working. DNS is resolving I don't understand the "Cannot find address" lines I did a ping by name and they resolve. what are the "Error ret

good morning, The programs are run from a script in the /etc/init.d directory. Here is the script that runs :: echo" THIS SCRIPT MUST BE RUN AS ROOT " echo " Launching Quantar Bridge" cd /opt/Quantar_

This board has been sitting for a while in the box just gathering dust. I pulled it out and found some docs on a AMBE server with Pi 3. Thats up and running. what can I do with this now ? I have multi

Has anyone else ever played with these cards ? Mike AE4ML

Good afternoon all, Steve, I'm doing a fresh install and I did the apt install dvswitch. I got Analog_Bridge , md380-emu and MMDVM_Bridge. I don't have P25Gateway , P25 Parrot or P25 Reflector. Is tha

I have a Reflector that I setup on Amazon Web services only for the purpose of interconnecting my P25 Quantar repeaters. I was given a talk-group ID there and I have continued to use it here too. I li

has anyone expierenced this with parrot. I have had two repeaters do this to me. I use TG10 and send my voice message and two minutes later it responds. Seemed odd. I power cycled the pi and that didn

GIve me about a week and I'll share them, Thanks Steve, That parrot issue is very strange. The one site has no internet but I have a VHF & UHF quantar up there. I have the setup to allow me to talk fr

I have a site at a local hospital. I have recently obtained a wired internet connection for the Quantar and RMS Gateway on their guest network. Because of hipa and other issues I found that I can pass

Mike, I saw your write up very nicely done. I'm looking forward to building that setup myself. Are you planning on a write up for the dashboard as well ? Mike AE4ML

I followed the instructions in the Blog, It was all correct. However there was one flaw that I found. That was a failure in the Analog_bridge_P25.ini file It wouldn't let me leave gatewayDmrId = 0 & r

I have 2 Quantar repeaters up at a mountain site.One VHF & one UHF both of them are setup with routers and PI's. The VHF is currently not connected to the internet. I have the UHF Quantar at the site

That opens up a lot Steve, Ok not looking at the existing tools. I would like to have access directly to the trio or each individual UHF repeaters and/or the VHF repeater via MMDVM Hotspot (DMR or P25

I like the idea, I had originally give a thought to local reflectors ( Repeater <-> Quantar_Bridge <-> MMDVM_Bridge <-> P25Gateway <-> P25Reflector However the issue that comes up is this. All of thes

So my central reflector would look something like this MMDVM_Bridge <-> P25Gateway <-> Local_P25Reflector 34103 32010 42020 41000 34100 42020 32010 MMDVM_Bridge <-> P25Gateway <-> Local_P25Reflector 3

Steve, I started building on the centralized reflector(s) The first reflector was no problem. Its up and working. The second reflector nothing can connect to it. I see in the logs of the repeater that