after playing again and again, I decided to redo the rpt, module and iax conf files on the asterisk side. it all started to work. Now I will have to do some compare of those files to understand what w

#analog_bridge #mmdvm_bridge

When traffic passes in either direction it is reflected in the logs. I would look there for clues.

#analog_bridge #mmdvm_bridge

I have a vps that run both allstarlink and dvswitch the install went well and I was able to connect to asl did a link to Hamshack Hotline and all is working. I also have a iaxrpt connection and I can

#analog_bridge #mmdvm_bridge

Inline: It in AB.ini ; Information for DV3000 hardware decoder ; There are two configuration modes: IP (AMBEServer) and serial (direct connect hardware) ; Use top server and port if using AMBEServer ;

#analog_bridge

Steve, I'm starting on a new DMR-AB to replace that old one from 5 years ago. I have ASL installed and prepped for the AB/MMDVMB/. . . I pllan to reuse the DV3000 AMBE Pi hat instead of MD380 emulatio

#analog_bridge

I wonder if they have finally cracked down on all the non-RF modes of getting on? I got a similar issue, but I’ve found it to only happen on group 3100. What happens is that you might get the first tr

#brandmeister #mmdvm_bridge #analog_bridge

Hmm, I've never seen that problem. All of my hotspots, instances of DVSwitch, etc connect to the same BM master. But each one has a different 2 digit suffix on its login ID.

#brandmeister #mmdvm_bridge #analog_bridge

You can check if your node is connecting to Brandmeister by logging on to the Brandmeister.network home page. Entering your logon/password (BM password not Hotspot password) and clicking on My Hotspot

#brandmeister #mmdvm_bridge #analog_bridge

On 1/29/2021 11:28 AM, Peter Buckley via groups.io wrote: I had a working DVSWITCH Allstar <--> DMR/BrandMeister Gateway. Only using Allstar to DMR Gateway to Brandmeister.... I believe my configurati

#brandmeister #mmdvm_bridge #analog_bridge

The ID is your DMRID + the SSID that identifies the hot spot that you are logging into BM as. The password is the HotSpot password you setup. Steve N4IRS

#brandmeister #mmdvm_bridge #analog_bridge

I had a working DVSWITCH Allstar <--> DMR/BrandMeister Gateway. Only using Allstar to DMR Gateway to Brandmeister.... I believe my configuration (error?) has to do with how MMDVM_Bridge.ini is trying

#brandmeister #mmdvm_bridge #analog_bridge

I was using Hamvoip as I was trying to use a Pi4 (seems to be the only option currently for ASL + DVswitch, happy to be corrected there). I reinstalled with a 3b plus and the ASL Rpi image and install

#analog_bridge #mmdvm_bridge #dmrlink

Hello, I have a Archlinux Hamvoip node that I pulled down Dvswitch from the repository and have ASL<->Prime TGIF working. I have the audio levels sounding pretty good after tweaking some on the Analog

#analog_bridge #mmdvm_bridge #dmrlink

Yes, that is the example string used in HamVoIP, which generates a GSM file on the node setup script.

#analog_bridge #mmdvm_bridge

That's just a default example which was never changed to something useful by whoever installed that node.

#analog_bridge #mmdvm_bridge

I would guess, the HAMVOIP node.

#analog_bridge #mmdvm_bridge

Out of curiosity, where is it getting WA3XYZ PL 88.5 from?

#analog_bridge #mmdvm_bridge

It may have been I set the ID string to empty rather then commenting out the line. I'll test and adjust the example if needed. Thanks, Steve

#analog_bridge #mmdvm_bridge

I updated it, lets see what happens. Thanks

#analog_bridge #mmdvm_bridge

on the DVSwitch Server. Yes in /etc/asterisk

#analog_bridge #mmdvm_bridge