Show output: dahdi_scan dahdi_test -c 10

#analog_bridge

Do you have chan_dahdi.conf in /etc/asterisk? Do you have simple usb and usbradio enabled on /etc/asterisk/modules?

#analog_bridge

root@K5TRA_ASL_testserver:/usr/src # lsmod | grep dahdi dahdi_dummy 3432 0 dahdi 229497 1 dahdi_dummy crc_ccitt 1771 1 dahdi

#analog_bridge

lsmod | grep dahdi Show result. Did you do a apt-get update / apt-get upgrade since starting ASL?

#analog_bridge

Steve, Last night I installed everything and ran into a problem with ASLerrors. Today, I started with a known good ASL install and overlayed the DVSwitch stuff. No errors on installs. This is the clos

#analog_bridge

I rebooted and tried it again and I now have linux-headers-4.19.66-v7 installed and reported with uname -r. I'll keep you posted Tom

#analog_bridge

Steve, I just started with a fresh Raspian image and performed all of the suggested steps: apt-get update apt-get upgrade apt-get install raspberrypi-kernel-headers -y Unfortunately, I'm still seeing

#analog_bridge

2 options I can see at this point. 1: Start with a fresh Stretch apt-get update apt-get upgrade apt-get install raspberrypi-kernel-headers -y Verify you have headers matching the running kernel. If so

#analog_bridge

I guess I could start over with a working ASL image of my own and do all the dvswitch install including P25reflector and analog-bridge. That's a lot of re-do. Tom

#analog_bridge

I want to make a bridge between ASL and P25. I understand that I must use the USRP channel driver and ports 32001, 34001. I believe the flow is ASL<->analog_bridge<->MMDVM<->P25gateway<->P25reflector.

#analog_bridge

Yes user blocked comes from bm, but not “muted” Corey n3fe

#analog_bridge

if it says user blocked it is brandmeister. you have to wait 1 hr for it to unlock or switch servers

#analog_bridge

Well, Neither AB or MB generate a voice message so...

#analog_bridge

Thanks for getting back to me. The BrandMeister team assured me this message was not coming from them... Michael AF6FB

#analog_bridge

Michael, In Analog_Bridge.ini change: minTxTimeMS = 2500 to minTxTimeMS = 3000 The message is coming from BM (Very loud) If this does not solve the issue, we will go the next step. Steve N4IRS

#analog_bridge

Hello, We have DVSwitch running with a connection to BrandMeister to our AllStar server. I think this is MMDVM_Host <-> analog_bridge. The AllStar server is the hub of our analog repeater network. We

#analog_bridge

Need help please have issues with connecting to 1999

#analog_bridge #mmdvm_bridge

No, but it will get you set up with ASL and Analog_Bridge. Then you will need to connect IPSC_Bridge Sent by smoke signal (AT&T)

#analog_bridge

I just checked the IPSC2-Texas master. One of the three TG's that I'm interested in on DMR-MARC is listed (Lonestar). The two that were not (Dillo and Cactus) are private intertie related TG's. So, I'

#analog_bridge

I was just reminded that many of the DMARC TGs are available on DMR+ which MMDVM_Bridge will connect to. I would check if the TGs you want are available on DMR+ Steve N4IRS

#analog_bridge