Michael, In Analog_Bridge.ini change: minTxTimeMS = 2500 to minTxTimeMS = 3000 The message is coming from BM (Very loud) If this does not solve the issue, we will go the next step. Steve N4IRS

#analog_bridge

Hello, We have DVSwitch running with a connection to BrandMeister to our AllStar server. I think this is MMDVM_Host <-> analog_bridge. The AllStar server is the hub of our analog repeater network. We

#analog_bridge

Need help please have issues with connecting to 1999

#analog_bridge #mmdvm_bridge

No, but it will get you set up with ASL and Analog_Bridge. Then you will need to connect IPSC_Bridge Sent by smoke signal (AT&T)

#analog_bridge

I just checked the IPSC2-Texas master. One of the three TG's that I'm interested in on DMR-MARC is listed (Lonestar). The two that were not (Dillo and Cactus) are private intertie related TG's. So, I'

#analog_bridge

I was just reminded that many of the DMARC TGs are available on DMR+ which MMDVM_Bridge will connect to. I would check if the TGs you want are available on DMR+ Steve N4IRS

#analog_bridge

See this: <https://dvswitch.groups.io/g/main/files/IPSC_AB_ASL.txt> <https://dvswitch.groups.io/g/allstarlink/files/ASL%20to%20DMR%20Bridge.pdf> Instead of MMDVM_Bridge you will use IPSC_Bridge Analog

#analog_bridge

Jeff, I have an older ASL-DMR bridge running with a DV3000 running with access to two cbridge connections (since 2015). As long as I maintain full quieting access to my allstarlink node, there will be

#analog_bridge

You will probably want to do a separate asl node from your bm connection. From past experience bm would prefer you not bridging networks. So you may want to setup a separate public asl node to connect

#analog_bridge

Tom, The connection to a c-Bridge would be through IPSC_Bridge rather then MMDVM_Bridge. It would look like this for ASL: ASL <-> Analog_Bridge <-> IPSC_Bridge <-> c-Bridge. Steve N4IRS

#analog_bridge

Can a DMR-allstar bridge connect to a DMR-MARC cbridge? I've been seeing only Brandmeister connection info. Thanks, Tom / K5TRA

#analog_bridge

i did stop the ambe server here is the logs. same error on port 31100 will close upon sending the marco ^DMR mode I: 2020-06-04 03:23:37.362 Tune macro: *DMR will invoke "/opt/Analog_Bridge/dvswitch.s

#analog_bridge

Yes Mike, Im running the stick at the same host using pi3, my problem is when i issue the DMR mode @ Dvswitch mobile client the error pertaining to port 31100 will close. and will not receive audio fr

#analog_bridge

Andrew, By the error you are seeing I have to assume you are running AMBEServer on the same machine as Analog_Bridge is running on. If this is so, you can just run the DV3000 (or other stick) directly

#analog_bridge

HI Ernie, I only have one instance for analog and mmdvm bridge this is right after install and configuration from the pdf documentation posted here. Regards, Andrew

#analog_bridge

You may have another Analoge_Bridge running. MMDVM_Bridge and Analoge_Bridge have usually been installed to start up when your device is restarted. I get caught out myself. I like running them in term

#analog_bridge

Hi All, Can you help me with the error below? it seems that theres an error on port when clicking the marco<>Mode Select <> DMR on mobile phone port 31100 will close. I: 2020-06-03 04:51:38.416 MESSAG

#analog_bridge

bonjour monsieur comment on faire pour changer les port dans le ficher analog bridge.ini..cordialement

#analog_bridge

<https://dvswitch.groups.io/g/main/wiki/Help%21> Steve N4IRS

#analog_bridge

Help me to make working the application tx and Rx

#analog_bridge