I would suggest you follow the howto on one machine to learn before you attempt multi-hosts. Setup DMR as the howto shows before attempting other modes. Steve N4IRS

#mmdvm_bridge #hblink #analog_bridge

Alec, Trying to do a new install & setup between my Allstarlink, D-star, P25 to start with then possibly a bridge to Fusion & BM TG once I get the others working good. As I stated previously, I have t

#mmdvm_bridge #hblink #analog_bridge

Are you linking this to a BM TG? you can use MMDVM_Bridge to link this to the BM with your id+2 and then map it to the TG in selfcare. do the same for ASL link on your raspberry pi. Alec N1AJW

#mmdvm_bridge #hblink #analog_bridge

also, the install will be on a separate server. the asl on a raspberry pie and the others are on a Debian system. so how would i make this work?

#mmdvm_bridge #hblink #analog_bridge

Steve, is this also help with the install and setup of the d-star side of this?

#mmdvm_bridge #hblink #analog_bridge

<https://dvswitch.groups.io/g/allstarlink/files/ASL%20to%20DMR%20Bridge.pdf>

#mmdvm_bridge #hblink #analog_bridge

Having a hard time locating & install & setting up MMDVM_Bridge, Analog_bridge to do allstarlink, d-star, dmr, p25 linking but haven't seen any for Debian. I am at a loss to completing the 2-year proj

#mmdvm_bridge #hblink #analog_bridge

You're typing "port address" when you mean port number. I think that's why you are confusing JJ et al. Assuming they're all running on the same host, they will all use the localhost IP ADDRESS (127.0.

#analog_bridge

If only it were so. In the diagram below (if I understand it) you have NXDN, DMR and YSFn all enabled. That's fine but NXDN is going to need to point it's TX and RX UDP ports at another mode (or Analo

#analog_bridge

Port address, not IP. As same with each P25 NXDN DMR etc service instance that is on the same server. A separate PORT ADDRESS will be needed for each instance of a service running on the same server.

#analog_bridge

Maybe it's just a matter of what you and I are calling thing? I read "address" as an IP Address which does not need to be unique at all. All that needs to happen is each mode has an ASL node which lis

#analog_bridge

I was referring to the USRP address. One address set for each node.

#analog_bridge

You are correct with your design. Not sure what "address" needs to be different.. but each would require it's own node entry in your ASL config and then you would need to link those ASL nodes together

#analog_bridge

The only thing I can see to note is that you will need 3 nodes. One for EACH AB you are showing. Each will need a unique address on the same server. Perhaps there is more I am over looking.

#analog_bridge

Would this seem like a appropriate all mode solution? Or am i over complicating this? I am not sure on the DStar

#analog_bridge

Exactly what i needed to know, thanks Steve

#analog_bridge

The only way to bridge USRP across more then 2 connections is with ASL. The other issue to consider is that you don't ALWAYS want to go analog for conversion. Consider this: DMR, NXDN, YSFn. No conver

#analog_bridge

Bridge more than one (all?) digital modes together

#analog_bridge

What exactly is your ultimate goal?

#analog_bridge

So i have a simple DMR to P25 Gateway working by piggybacking 2 instances of Analog_Bridge. I would like to add more modes, what process or component ties more than 2 Analog Bridges together?

#analog_bridge