Port address, not IP. As same with each P25 NXDN DMR etc service instance that is on the same server. A separate PORT ADDRESS will be needed for each instance of a service running on the same server.

#analog_bridge

Maybe it's just a matter of what you and I are calling thing? I read "address" as an IP Address which does not need to be unique at all. All that needs to happen is each mode has an ASL node which lis

#analog_bridge

I was referring to the USRP address. One address set for each node.

#analog_bridge

You are correct with your design. Not sure what "address" needs to be different.. but each would require it's own node entry in your ASL config and then you would need to link those ASL nodes together

#analog_bridge

The only thing I can see to note is that you will need 3 nodes. One for EACH AB you are showing. Each will need a unique address on the same server. Perhaps there is more I am over looking.

#analog_bridge

Would this seem like a appropriate all mode solution? Or am i over complicating this? I am not sure on the DStar

#analog_bridge

Exactly what i needed to know, thanks Steve

#analog_bridge

The only way to bridge USRP across more then 2 connections is with ASL. The other issue to consider is that you don't ALWAYS want to go analog for conversion. Consider this: DMR, NXDN, YSFn. No conver

#analog_bridge

Bridge more than one (all?) digital modes together

#analog_bridge

What exactly is your ultimate goal?

#analog_bridge

So i have a simple DMR to P25 Gateway working by piggybacking 2 instances of Analog_Bridge. I would like to add more modes, what process or component ties more than 2 Analog Bridges together?

#analog_bridge

Dear Sir I have some confuse,please help me . If I want to tune P25 to DMR (dmr can hear voice louder ,so I need to set Audio_Unity in AB_P25 And use Audio_USE_Gain on AB_DMR modify dmrgain of AB_DMR

#analog_bridge

Steve, I didn't know about parameter very well for AMBEtest4.py. The result was without parameter. This time I tried with "AMBEtest4.py -e -v -n" and the baudrate was 460800 but it still doesn't seem

#analog_bridge

OK like this gentleman I too am having issues it seems my node is communicating with brandmesiter & echolink, both are connected & reporting all the test steps along the process were verified as instr

#analog_bridge #mmdvm_bridge

2020년 2월 27일 (목) 19:54, Steve N4IRS <szingman@...>님이 작성:

#analog_bridge

Joe, Analog_Bridge does support a Pi-Hat type of DV3000. Both Mike and a regularly run the NWDigital Pi-Hat DV3000. What parameter are you using to run AMBEtest4.py? It should be AMBEtest4.py --error

#analog_bridge

Thank you for the great work of DVSwitch. I am trying to hook up my AMBE GPIO board which was made in Japan and similar to DV3000 GPIO board. It was working ok for AMBE server on RPI3B+ with the follo

#analog_bridge

Thanks Steve, well this is the idea hopefully we can make it work: I built two repeaters for our Mexican radio club, both in the same rack on a mountain top, one is using a Rasperry Pi 4 running PI-ST

#analog_bridge

Alex, The gatewayDmrId is the ID sent by Analog_Bridge if it has no other choice. Depending on how you are using Analog_Bridge, it may never be used. Hope this helps, 73, Steve N4IRS

#analog_bridge

Hello, in the Analog_Bridge.ini file under [AMBE AUDIO] and for the parameters: gatewayDmrId = xxxxxx ; ID to use when transmitting from Analog_Bridge repeaterID = 3342045 ; ID of source repeater Whic

#analog_bridge