As I said, your diagram shows both DVSM and ASL connected to AB. (on different ports.) Let's stick with #2 Show me your DVSwitch.ini file. Show me your AB log when there is traffic from BM. Steve

#mmdvm_bridge #analog_bridge #brandmeister

#1 works thru all the way. it is connected to ASL 52417 #2 & #3 both connect to <BM> and the hot spots are active. Not connected to ASL at all currently. Using DVMobile, they Transmit, Pass Audio to t

#mmdvm_bridge #analog_bridge #brandmeister

In your diagram I see both DVSwitch Mobile and ASL connected to AB. Is that not the case? Set both USRP TX and RX port to the same port number and retest. Steve N4IRS

#mmdvm_bridge #analog_bridge #brandmeister

; Analog_Bridge configuration file. - MAIN include = dvsm.macro [GENERAL] logLevel = 2 ; Show messages and above 0=No logging, 1=Debug, 2=Message, 3=Info, 4=Warning, 5=Error, 6=Fatal decoderFallBack =

#mmdvm_bridge #analog_bridge #brandmeister

Post your Analog_Bridge.ini file for each. Steve N4IRS

#mmdvm_bridge #analog_bridge #brandmeister

I have been setting up multiple nodes and bridges on a Vultr cloud server. Currently I have: 1) ASL to DMR Bridge - Working correctly - I have made a contact thru a <Handheld> <Pi zero Hotspot > <Bran

#mmdvm_bridge #analog_bridge #brandmeister

Yes you need cmd (copy and paste error) It's in the same place as your 997 [functions] off the top of my head.

#analog_bridge

Yes, I looked at the dvswitch.sh yesterday. Pretty cool. My question is implementation from ASL. I typically call shell scripts with a function in the following way: 997=cmd, /usr/local/sbin/on_normal

#analog_bridge

For what you are doing, you will use the macro functions to run a external program. That program is dvswitch.sh If you run dvswitch.sh without any parameters: root@dvswitch:/var/www/html# /opt/Analog_

#analog_bridge

ASL to control. I see provisions for that in the files; but no detail.

#analog_bridge

Are you talking about using DVSwitch Mobile with ASL or controlling AB/MB from ASL?

#analog_bridge

Where do I find asl.macro documantation and examples ? Tom / K5TRA

#analog_bridge

I cleaned some of the early ASL DAHDI troubleshoot messages out of the thread (86 messages) I hope someone reading the thread will learn some things. Steve N4IRS

#analog_bridge

Inline A general comment, most of the default values are setup for the more common connectivity. Most of the default values will "just work" Off the top of my head AB <-> P25 only needed changes in AB

#analog_bridge

Steve, The Host files are in ./ . I copied the P25Hosts.ini from /var/lib/mmdvm and the Private_P25Hosts is there; but empty. By commenting out the RptAddress , it seems to have fixed the remaining is

#analog_bridge

OK, So, P25Gateway is not too chatty. Do you have the entry for 10888 in both private and public host file? Change P25Gateway.ini to this: [General] Callsign=K5TRA RptAddress=127.0.0.1 # RptAddress=19

#analog_bridge

I'm back from dinner.

#analog_bridge

I should have caught this before. This is what was missing from the MB log. I: 2020-08-10 23:30:51.942 P25 Network Parameters I: 2020-08-10 23:30:51.942 Gateway Address: 127.0.0.1 I: 2020-08-10 23:30:

#analog_bridge

OK! We now have ASL to MB action. I don't see any log activity at the gateway yet. I have the dinner call -- I'll be back in 20 minutes or so. Thanks again for all this help. Tom

#analog_bridge

It needs to be enabled in both places.

#analog_bridge