I have been setting up multiple nodes and bridges on a Vultr cloud server. Currently I have: 1) ASL to DMR Bridge - Working correctly - I have made a contact thru a <Handheld> <Pi zero Hotspot > <Bran

#mmdvm_bridge #analog_bridge #brandmeister

Thank you very much!

#brandmeister

You just need one instances of MMDVM_Bridge. Point DMR to Branmeister and point YSF to your reflector. https://dvswitch.groups.io/g/main/wiki/6097

#brandmeister

Hi, everyone， I have successfully set up a YSFReflector on Ubuntu 16.04 Server. Now, I want to link this YSFReflector to BM talkgroup, How can I link it to BM talkgroup? Do you have any good suggestio

#brandmeister

Hi steve, Thank you for your message. It is nnow 9:30 PM here. My new raspberry pi has an intermittent wifi connection. I was initially connected to our router via wifi during those times. Andrew aske

#brandmeister

What was the problem? Sent via smoke signal (AT&T)

#brandmeister

Thank you to all, Finally we were able to connect, With the help of andrew DV1ZEJ. The newly arrived raspi4 is giving me the problem. One again Thank you DU!ZC

#brandmeister

Ramon, I tested all 3 IDs below all 3 logged into the Master with a password of passw0rd [General] Callsign=DU1ZC # Id=5151041 OK # Id=5150415 OK # Id=5151131 OK [DMR Network] Enable=1 Address=bm5151.

#brandmeister

Hi Steve, Thank you for your time. I am only using my DMR ID 5151041 on this mode. That ID number came up to my attention because a fellow ham told me that my callsign is not showing up but that # id

#brandmeister

Ramon, I connected to bm5151.hamradio.com.ph as a test: General] Callsign=DU1ZC Id=5151131 DMR Network] Enable=1 Address=bm5151.hamradio.com.ph Port=62031 Password=passw0rd If you are running the dvli

#brandmeister

HI Steve and Corey, i am truly sorry for not replying immediately. 1. I did what you told me Corey and even 10 minutes to go back and turn it off. The result is what I posted above. Then somebody told

#brandmeister

That is exactly what I want him to do, but there is one other thing that sticks out. The latency... 3102 is set so if your latency is above 150 ms, don’t connect. They may have something g like that i

#brandmeister

Ramon, What Corey wants you to do is: Login into your bm self care page create a hotspot password for the call sign you are using Apply the password. Wait five minutes and disable hotspot security. Tr

#brandmeister

Hi corey, Here is the result. pi-star@pi-stardvs(rw):~$ ping bm5151hamradio.com.ph PING bm5151hamradio.com.ph (45.79.222.138) 56(84) bytes of data. 64 bytes from apple.parklogic.com (45.79.222.138): i

#brandmeister

That was just a guess, but please let me know how you make out.

#brandmeister

Hi Corey, I will do it now. Thank you. DU1ZC

#brandmeister

I want you to try something. I know this is going to sound very strange. I want you to do into your bm self care and create a hotspot password for the I’d you are using and apply it. Then I want you t

#brandmeister

Yes we have tried it also with the same result. Thank you de DU!ZC

#brandmeister

change Address=bm5151.hamradio.com.ph to Address=120.89.61.77 . seems you are having a DNS/routing issue from you ISP. 73 BJ DV8AWC

#brandmeister

Try plug in the IP instead of DNS. 73, Eric

#brandmeister