Hi Jeff, This is the comments I have I hope it helps. Good Luck! 73, Eric [YSF] Address = 127.0.0.1 ; Address to send AMBE TLV frames to (export) TXPort = 31100 ; Port to send AMBE TLV frames to (expo

You only need one instance of MB and its look loke this: BM TG 52007<->MB<->Ysf Ref https://dvswitch.groups.io/g/main/wiki/6097 MMDVM_Bridge.ini [DMR Network] Enable=1 Address=3103.repeater.net Port=6

Jon 73, Eric

You just need one instances of MMDVM_Bridge. Point DMR to Branmeister and point YSF to your reflector. https://dvswitch.groups.io/g/main/wiki/6097

#brandmeister

Try plug in the IP instead of DNS. 73, Eric

#brandmeister

Ramon, It does work here. I: 2020-06-19 13:35:11.623 DMR Network Parameters I: 2020-06-19 13:35:11.623 Address: bm5151.hamradio.com.ph I: 2020-06-19 13:35:11.623 Port: 62031 I: 2020-06-19 13:35:11.623

#brandmeister

port should be: Port=62030 Also dmr id should only be 7 digit id when connecting to XLX 73, Eric

Steve N4IRS, I downloaded this the other day got error "page not found". sorry I cant remember the date looks like a week ago. wget https://github.com/DVSwitch/Analog_Bridge/raw/master/dvswitch.sh 73,

Its been a while when I made a bridge for FCS realizing I have no DMR connectivity and using two sets of MB looks like this: YSF reflector<->MB-YSF<->MB_FCS<->YSF gateway and its working! 73, Eric

#mmdvm_bridge

Yes Rudy my appologies, I realized you use to two instances of MB for DMRGateway. I'm glad you made it work and thanks Steve N4IRS. best, 73 Eric

#mmdvm_bridge

Rudy, Here is a working sample YSGateway [General] Callsign= K6KWB #Suffix= # Suffix=ND Id=your id RptAddress=127.0.0.1 RptPort=62045 >>>port of your choice should cross MB_YSF LocalAddress=127.0.0.1

#mmdvm_bridge

Steve N4IRS, That latest update on MB means we dont need to set up static TG on self care? set TG on DVSwitch.ini is enough? Appreciated. best and 73, Eric

#mmdvm_bridge

Yes you need two MB one connect to BM and one for YSF Gateway. Almost similar to the first one you create use YSF Gateway and select FCS. BM-TG??<->MB_BM<->MB_YSF<->YSF Gateway<->FCS003 Did you downlo

#mmdvm_bridge

Rudy, In this set up you will NOT use DMRGateway anymore. BM-TG-A<->MB1<->YSF >>>this one looks good! the second one will be: XLX<->MB2<->YSF >>> both your instance will connect to YSF Ref. make sure

#mmdvm_bridge

Rudy, Also if you have a FCS you can do the same way by replacing DMRGateway to YSFGateway. Bridging XLX I only use one instance of MB but I point to YSF reflector looks like this: First instance: XLX

#mmdvm_bridge

Pete, If your set up is ASL to YSF, leave AB.ini to TG-9 and make sure point MB.ini YSF to your YSF reflector IP or DNS. 73, Eric

Rudy, Double check your MB_BM DVSwitch.ini set to slot 1, should be slot 2. M: 2020-05-15 07:06:48.384 DMR, Opening INI file: DVSwitch.ini M: 2020-05-15 07:06:48.385 DMR, Setting [DMR] Address -> 127.

#mmdvm_bridge

Great Job! sorry I forgot to tell you that lol. DMR ID when connecting to XLX should only be your 7 digit DMR ID : )

Uli, Just to be clear, this is a YSF Ref <-> XLX Ref modul A See sample below - this will connect to XLX??? module A MB.ini [DMR Network] Enable=1 Address=ip or DNS of XLX reflector Port=62030 Jitter=

Uli, I had my XLX and YSF reflector set up this way one instances of MB and its working. Do you have a copy of your MB.ini that we can take a look? best and 73, Eric